Re: Kamailio 6.0 failed to start on Alpine

Could you start your Kamailio inside quay.io/centos/centos:stream10 docker
image.
Is the issue still here?

On Fri, Dec 19, 2025 at 10:24 AM Cindy Leung via sr-users <
[email protected]> wrote:

> Hello,
>
> We have recently upgraded our Alpine base image (3.23) along with Kamailio
> (6.0.4) and we are getting segfault at startup.  Our custom config was
> working in Alpine 3.22 with Kamailio 5.8.4.
>
> We are not building Kamailio from source.  We're getting it from apk.
>
> We were able to locate the problem with TLS.  We tested with the
> default config that shipped with the package - segfault.
>
> Our self-signed cert is generated by this:
> openssl req -newkey rsa:2048 -x509 -keyout private.key -out cert.pem -days
> 3650 -nodes -subj "/C=US/ST=/L=/O=/OU=/CN="
>
> We tried to build it from source - segfault
>
> Then we tried the same exercise with Ubuntu - apt install kamailio
> kamailio-tls-modules
> Using the same certificate, using the default config in the package, no
> segfault.
>
> I wish you all Happy Holidays!!  TIA.  Here're the logs from the alpine
> startup:
>
> Listening on
>              udp: 127.0.0.1:5060
>              udp: 172.17.0.2:5060
>              tcp: 127.0.0.1:5060
>              tcp: 172.17.0.2:5060
>              tls: 127.0.0.1:5061
>              tls: 172.17.0.2:5061
> Aliases:
>              tls: ef79bc4947ca:5061
>              tls: localhost:5061
>              tcp: ef79bc4947ca:5060
>              tcp: localhost:5060
>              udp: ef79bc4947ca:5060
>              udp: localhost:5060
>
>  0(45) INFO: <core> [core/tcp_main.c:5252]: init_tcp(): using epoll_lt as
> the io watch method (auto detected)
>  0(45) INFO: <core> [main.c:3322]: main(): current open file limits
> [soft/hard]: [1048576/1048576]
> Segmentation fault         (core dumped) /usr/sbin/kamailio -E -f
> /etc/kamailio/kamailio.cfg -DD
>
>
>
> (gdb) bt full
> #0  0x0000ffffbe397df4 in __pthread_getspecific (k=k@entry=0) at
> src/thread/pthread_getspecific.c:8
>         self = <optimized out>
> #1  0x0000ffffbe2c2300 in mod_init () at tls_mod.c:406
>         method = <optimized out>
>         verify_client = <optimized out>
>         rand_buf =
> "\210\000\001\000\001\000\000\000\200\004\360\330\377\377\000\000\024\3518\276\377\377\000\000\275@
> =\276\377\377\000"
>         k = 0
>         __func__ = "mod_init"
>         __llevel = <optimized out>
>         __kld = <optimized out>
> #2  0x0000aaaad4e659b8 in init_mod (m=0xffffbdb86660) at
> core/sr_module.c:1037
>         ret = <optimized out>
>         __func__ = "init_mod"
> #3  0x0000aaaad4e658c4 in init_mod (m=0xffffbdb89bb0) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #4  0x0000aaaad4e658c4 in init_mod (m=0xffffbdb8a110) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #5  0x0000aaaad4e658c4 in init_mod (m=0xffffbdb8aac0) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #6  0x0000aaaad4e658c4 in init_mod (m=0xffffbdb8b840) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #7  0x0000aaaad4e658c4 in init_mod (m=0xffffbdb8dad0) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #8  0x0000aaaad4e658c4 in init_mod (m=0xffffbdb8eab0) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #9  0x0000aaaad4e658c4 in init_mod (m=0xffffbdb8f2c0) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #10 0x0000aaaad4e658c4 in init_mod (m=0xffffbdb90220) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #11 0x0000aaaad4e658c4 in init_mod (m=0xffffbdb9a740) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #12 0x0000aaaad4e658c4 in init_mod (m=0xffffbdb9ac60) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #13 0x0000aaaad4e658c4 in init_mod (m=0xffffbdb9b0b0) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #14 0x0000aaaad4e658c4 in init_mod (m=0xffffbdb9bad0) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #15 0x0000aaaad4e658c4 in init_mod (m=0xffffbdb9ceb0) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #16 0x0000aaaad4e658c4 in init_mod (m=0xffffbdb9dc70) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #17 0x0000aaaad4e658c4 in init_mod (m=0xffffbdb9eba0) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #18 0x0000aaaad4e658c4 in init_mod (m=0xffffbdb9f410) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #19 0x0000aaaad4e658c4 in init_mod (m=0xffffbdb9f8c0) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #20 0x0000aaaad4e658c4 in init_mod (m=0xffffbdb9ff70) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #21 0x0000aaaad4e658c4 in init_mod (m=0xffffbdba1b60) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #22 0x0000aaaad4e658c4 in init_mod (m=0xffffbdba2060) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #23 0x0000aaaad4e658c4 in init_mod (m=0xffffbdba3040) at
> core/sr_module.c:1032
>         ret = <optimized out>
>         __func__ = "init_mod"
> #24 0x0000aaaad4e6a34c in init_modules () at core/sr_module.c:1068
>         t = <optimized out>
>         i = <optimized out>
>         __func__ = "init_modules"
> #25 0x0000aaaad4c349b4 in main (argc=<optimized out>, argv=<optimized
> out>) at main.c:3353
>         cfg_stream = <optimized out>
>         c = <optimized out>
>         r = <optimized out>
>         tmp = 0xffffbe3f7ba0 <ldso> ""
>         tmp_len = 0
>         port = 5060
>         proto = 0
>         aproto = 0
>         ahost = 0x0
>         socket_name = 0x0
>         aport = 0
>         listen_field_count = <optimized out>
>         listen_fields = {0x18 <error: Cannot access memory at address
> 0x18>, 0x99ba <error: Cannot access memory at address 0x99ba>,
>           0x18 <error: Cannot access memory at address 0x18>}
>         options = 0xaaaad4f178ee
> ":f:cm:M:dVIhEeb:B:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:"
>         ret = -1
>         seed = 1938757098
>         rfd = <optimized out>
>         debug_save = <optimized out>
>         debug_flag = <optimized out>
>         dont_fork_cnt = <optimized out>
>         n_lst = <optimized out>
>         p = <optimized out>
>         tbuf = 0xffffd8f01ab0 "!"
>         tbuf_tmp = <optimized out>
>         st = {st_dev = 63, st_ino = 48481, st_mode = 16877, st_nlink = 1,
> st_uid = 100, st_gid = 0, st_rdev = 0, __pad = 0, st_size = 4096,
>           st_blksize = 4096, __pad2 = 0, st_blocks = 8, st_atim = {tv_sec
> = 1766082557, tv_nsec = 947394010}, st_mtim = {tv_sec = 1766093215,
>             tv_nsec = 591712013}, st_ctim = {tv_sec = 1766093215, tv_nsec
> = 591712013}, __unused = {0, 0}}
>         l1 = <optimized out>
>         lim = {rlim_cur = 1048576, rlim_max = 1048576}
>         option_index = 0
>         long_options = {{name = 0xaaaad4f18d0a "help", has_arg = 0, flag =
> 0x0, val = 104}, {name = 0xaaaad4f2682c "version", has_arg = 0, flag = 0x0,
>             val = 118}, {name = 0xaaaad4f3197d "alias", has_arg = 1, flag
> = 0x0, val = 1024}, {name = 0xaaaad4f18d0f "subst", has_arg = 1, flag =
> 0x0,
>             val = 1025}, {name = 0xaaaad4f18d15 "substdef", has_arg = 1,
> flag = 0x0, val = 1026}, {name = 0xaaaad4f18d1e "substdefs", has_arg = 1,
>             flag = 0x0, val = 1027}, {name = 0xaaaad4f18d28 "server-id",
> has_arg = 1, flag = 0x0, val = 1028}, {name = 0xaaaad4f18d32 "loadmodule",
>             has_arg = 1, flag = 0x0, val = 1029}, {name = 0xaaaad4f18d3d
> "modparam", has_arg = 1, flag = 0x0, val = 1030}, {
>             name = 0xaaaad4f18d46 "log-engine", has_arg = 1, flag = 0x0,
> val = 1031}, {name = 0xaaaad4f26949 "debug", has_arg = 1, flag = 0x0,
>             val = 1032}, {name = 0xaaaad4f18d51 "cfg-print", has_arg = 0,
> flag = 0x0, val = 1033}, {name = 0xaaaad4f18d5b "atexit", has_arg = 1,
>             flag = 0x0, val = 1034}, {name = 0xaaaad4f18d62 "all-errors",
> has_arg = 0, flag = 0x0, val = 1035}, {name = 0x0, has_arg = 0, flag = 0x0,
>             val = 0}}
>         __func__ = "main"
>
>
> Cindy
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions --
> [email protected]
> To unsubscribe send an email to [email protected]
> Important: keep the mailing list in the recipients, do not reply only to
> the sender!
>

__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions -- [email protected]
To unsubscribe send an email to [email protected]
Important: keep the mailing list in the recipients, do not reply only to the sender!