Re: On HP-UX 10.20 [3.2.0b6 almost there]

Hi Gabriele,

I just did ./configure, make, make check, and make install with b6. 
make check said there was nothing to be done for anything. Is that 
normal? I thought it ran a bunch of tests...

After doing the install (with prefix set to /Library/htdig-3.2.0b6) 
everything, including man pages and all, ended up in the install 
directory. For some reason, these additional goodies weren't getting 
installed with b5. I don't know what you've done, but good work on 
that!

I'm not going to test the digging in my speed tests using Lachlan's 
suggestion for using "time".

Back later with some test results.

Ted Stresen-Reuter

My system:
Mac OS X (10.3.4), 768 MB RAM

On Jun 3, 2004, at 9:57 AM, Gabriele Bartolini wrote:

> Hi Jesse,
>
>    I slightly changed Lachlan's release, updating also the configure
> scripts. You can find the new files here: http://www.htdig.org/files/
>
>    Sorry, but I believe that updating autotools scripts would be more
> appropriate for a new release.
>
> Ciao,
> -Gabriele
>
>    I have upgraded the configure scripts
> Il gio, 2004-06-03 alle 10:02, J. op den Brouw ha scritto:
>> AFIAK, b5 had the same problem with make check and some issue about 
>> select()
>> but I can't remember. b6 definitely doesn't have the select() problem.
>> zlib not used is historical, dated back in the b4 series (it didn't 
>> work
>> then).
>> it's the WordType::instance thing again...........
>>
>> [msql@chaos htdig-3.2.0b6]$ make check
>> Making check in db
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/db'
>> make[1]: Nothing to be done for `check'.
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/db'
>> Making check in htlib
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htlib'
>> make[1]: Nothing to be done for `check'.
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htlib'
>> Making check in htword
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htword'
>> make[1]: Nothing to be done for `check'.
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htword'
>> Making check in htcommon
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htcommon'
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htcommon'
>> Making check in htnet
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htnet'
>> make[1]: Nothing to be done for `check'.
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htnet'
>> Making check in htfuzzy
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htfuzzy'
>> make[1]: Nothing to be done for `check'.
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htfuzzy'
>> Making check in htdb
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdb'
>> make[1]: Nothing to be done for `check'.
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdb'
>> Making check in htdig
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdig'
>> make[1]: Nothing to be done for `check'.
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdig'
>> Making check in htsearch
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htsearch'
>> make[1]: Nothing to be done for `check'.
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htsearch'
>> Making check in httools
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/httools'
>> make[1]: Nothing to be done for `check'.
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/httools'
>> Making check in installdir
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/installdir'
>> make[1]: Nothing to be done for `check'.
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/installdir'
>> Making check in include
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/include'
>> make[1]: Nothing to be done for `check'.
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/include'
>> Making check in htdoc
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdoc'
>> make[1]: Nothing to be done for `check'.
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/htdoc'
>> Making check in test
>> make[1]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test'
>> make MAKE="make" word dbbench txt2mifluz search testnet document url
>> make[2]: Entering directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test'
>> g++ -DHAVE_CONFIG_H -I. -I. -I../include
>> -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\"
>> -I../include -I../htlib
>> -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db
>> -I/opt/htdig/lib/zlib/include  -g -O2 -Wall -fno-rtti
>> -fno-exceptions -c -o word.o `test -f 'word.cc' || echo './'`word.cc
>> /bin/sh ../libtool --mode=link g++  -g -O2 -Wall -fno-rtti
>> -fno-exceptions  -L/opt/htdig/lib/zlib/lib -o word   word.o ../htne
>> t/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la
>> ../htlib/libht.la ../htcommon/libcommon.la ../htword/libhtword.l
>> a ../db/libhtdb.la ../htlib/libht.la -lz
>> mkdir .libs
>> g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o word word.o
>> -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcommon/.li
>> bs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a
>> ../htlib/.libs/libht.a -lz
>> g++ -DHAVE_CONFIG_H -I. -I. -I../include
>> -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\"
>> -I../include -I../htlib
>> -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db
>> -I/opt/htdig/lib/zlib/include  -g -O2 -Wall -fno-rtti
>> -fno-exceptions -c -o dbbench.o `test -f 'dbbench.cc' || echo
>> './'`dbbench.cc
>> /bin/sh ../libtool --mode=link g++  -g -O2 -Wall -fno-rtti
>> -fno-exceptions  -L/opt/htdig/lib/zlib/lib -o dbbench   dbbench.o .
>> ./htnet/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la
>> ../htlib/libht.la ../htcommon/libcommon.la ../htword/libht
>> word.la ../db/libhtdb.la ../htlib/libht.la -lz
>> g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o dbbench dbbench.o
>> -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcomm
>> on/.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a
>> ../htlib/.libs/libht.a -lz
>> g++ -DHAVE_CONFIG_H -I. -I. -I../include
>> -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\"
>> -I../include -I../htlib
>> -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db
>> -I/opt/htdig/lib/zlib/include  -g -O2 -Wall -fno-rtti
>> -fno-exceptions -c -o txt2mifluz.o `test -f 'txt2mifluz.cc' || echo
>> './'`txt2mifluz.cc
>> /bin/sh ../libtool --mode=link g++  -g -O2 -Wall -fno-rtti
>> -fno-exceptions  -L/opt/htdig/lib/zlib/lib -o txt2mifluz   txt2mifl
>> uz.o ../htnet/libhtnet.la ../htcommon/libcommon.la
>> ../htword/libhtword.la ../htlib/libht.la ../htcommon/libcommon.la 
>> ../htword
>> /libhtword.la ../db/libhtdb.la ../htlib/libht.la -lz
>> g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o txt2mifluz txt2mifluz.o
>> -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../
>> htcommon/.libs/libcommon.a ../htword/.libs/libhtword.a
>> ../db/.libs/libhtdb.a ../htlib/.libs/libht.a -lz
>> g++ -DHAVE_CONFIG_H -I. -I. -I../include
>> -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\"
>> -I../include -I../htlib
>> -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db
>> -I/opt/htdig/lib/zlib/include  -g -O2 -Wall -fno-rtti
>> -fno-exceptions -c -o search.o `test -f 'search.cc' || echo 
>> './'`search.cc
>> /bin/sh ../libtool --mode=link g++  -g -O2 -Wall -fno-rtti
>> -fno-exceptions  -L/opt/htdig/lib/zlib/lib -o search   search.o ../
>> htnet/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la
>> ../htlib/libht.la ../htcommon/libcommon.la ../htword/libhtwo
>> rd.la ../db/libhtdb.la ../htlib/libht.la -lz
>> g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o search search.o
>> -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcommon
>> /.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a
>> ../htlib/.libs/libht.a -lz
>> g++ -DHAVE_CONFIG_H -I. -I. -I../include
>> -DDEFAULT_CONFIG_FILE=\"/opt/htdig/htdig32/conf/htdig.conf\"
>> -I../include -I../htlib
>> -I../htnet -I../htcommon -I../htword -I../db -I../db -I../db -I../db
>> -I/opt/htdig/lib/zlib/include  -g -O2 -Wall -fno-rtti
>> -fno-exceptions -c -o testnet.o `test -f 'testnet.cc' || echo
>> './'`testnet.cc
>> /bin/sh ../libtool --mode=link g++  -g -O2 -Wall -fno-rtti
>> -fno-exceptions  -L/opt/htdig/lib/zlib/lib -o testnet   testnet.o .
>> ./htnet/libhtnet.la ../htcommon/libcommon.la ../htword/libhtword.la
>> ../htlib/libht.la ../htcommon/libcommon.la ../htword/libht
>> word.la ../db/libhtdb.la ../htlib/libht.la -lz
>> g++ -g -O2 -Wall -fno-rtti -fno-exceptions -o testnet testnet.o
>> -L/opt/htdig/lib/zlib/lib ../htnet/.libs/libhtnet.a ../htcomm
>> on/.libs/libcommon.a ../htword/.libs/libhtword.a ../db/.libs/libhtdb.a
>> ../htlib/.libs/libht.a -lz
>> collect2: ld returned 1 exit status
>> /usr/ccs/bin/ld: Unsatisfied symbols:
>>    WordType::instance  (data)
>> make[2]: *** [testnet] Error 1
>> make[2]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test'
>> make[1]: *** [check-am] Error 2
>> make[1]: Leaving directory
>> `/pers/www/msql/Projects/Htdig/BUILD320/htdig-3.2.0b6/test'
>> make: *** [check-recursive] Error 1
>>
>> [email protected] wrote:
>>
>>> Greetings Jesse,
>>>
>>> Thanks for that.  Is this the system that had problems with 3.2.0b5? 
>>>  If
>>> so, it is very good to hear that it runs b6!  Is there a reason for 
>>> not using
>>> zlib compression?
>>>
>>> Could you post the results from  make check ?
>>>
>>> Thanks again,
>>> Lachlan
>>>
>>>
>>>
>>>> From: "J. op den Brouw" <[email protected]>
>>>>
>>>>
>>>
>>>
>>>
>>>> HP-UX chaos B.10.20 U 9000/800 2004964319 unlimited-user license
>>>> hppa2.0-hp-hpux10.20
>>>> gcc 2.8.1
>>>> make 3.78
>>>> bash 2.03
>>>>
>>>> configure works, zlib compression compiled, but not used and no 
>>>> shared libs
>>>> make works
>>>> make check fails (!!)
>>>> make install works
>>>> rundig works (only 1000 pages tested), no external parsers 
>>>> configured
>>>> htsearch works
>>>>
>>>> builld and rundig log available.
>>>>
>>>> --jesse
>>>>
>>>>
>>
>>
>>
>>
>> -------------------------------------------------------
>> This SF.Net email is sponsored by the new InstallShield X.
>>> From Windows to Linux, servers to mobile, InstallShield X is the one
>> installation-authoring solution that does it all. Learn more and
>> evaluate today! http://www.installshield.com/Dev2Dev/0504
>> _______________________________________________
>> ht://Dig Developer mailing list:
>> [email protected]
>> List information (subscribe/unsubscribe, etc.)
>> https://lists.sourceforge.net/lists/listinfo/htdig-dev
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by the new InstallShield X.
> From Windows to Linux, servers to mobile, InstallShield X is the one
> installation-authoring solution that does it all. Learn more and
> evaluate today! http://www.installshield.com/Dev2Dev/0504
> _______________________________________________
> ht://Dig Developer mailing list:
> [email protected]
> List information (subscribe/unsubscribe, etc.)
> https://lists.sourceforge.net/lists/listinfo/htdig-dev
>



-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
From Windows to Linux, servers to mobile, InstallShield X is the one
installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
ht://Dig Developer mailing list:
[email protected]
List information (subscribe/unsubscribe, etc.)
https://lists.sourceforge.net/lists/listinfo/htdig-dev