Re: [Pound Mailing List] Correct use of Threads for Pound 2.7

Resending as the list rejected previously as I was no longer a member....

Hi Warren,
> Yes, I've had threads at about 4000 or so, I don't have a config to hand
> but I'm fairly sure you need to increase the ulimit to about twice the
> desired threads and then simply add the threads directive with a number and
> you're set.
> Can we see your config and an output of "ulimit -n" for the user running
> pound, out of interest I believe the default for pound is 128 without the
> threads directive even set.



Aaron West

Loadbalancer.org Limited
+44 (0)330 380 1064
www.loadbalancer.org

On 3 May 2017 at 19:01, Aaron West <aaron-Oteo70RhwZ77w/[email protected]> wrote:

> Sorry I mean "ulimit -n" not "unlimit...".
>
> Aaron West
>
> Loadbalancer.org Limited
> +44 (0)330 380 1064
> www.loadbalancer.org
>
> On 3 May 2017 at 18:57, Aaron West <aaron-Oteo70RhwZ77w/[email protected]> wrote:
>
>> Hi Warren,
>>
>> Yes, I've had threads at about 4000 or so, I don't have a config to hand
>> but I'm fairly sure you need to increase the ulimit to about twice the
>> desired threads and then simply add the threads directive with a number and
>> you're set.
>>
>> Can we see your config and an output of "unlimit -n" for the user running
>> pound, out of interest I believe the default for pound is 128 without the
>> threads directive even set.
>>
>> Aaron West
>>
>> Loadbalancer.org Limited
>> +44 (0)330 380 1064
>> www.loadbalancer.org
>>
>> On 3 May 2017 at 16:22, Warren Perdue <wperdue-V3Zkrsg/[email protected]> wrote:
>>
>>> Hey guys,
>>>
>>>
>>>
>>> Does anyone have an example of a pound.cfg properly using Threads?
>>>
>>> I have been trying to get my Thread limitation to work and Pound 2.7
>>> does like Threads 100 or any thread implementation. Have any of you used
>>> Pound’s Thread command and if so did it work and if you could include an
>>> example of the .cfg file utilizing Threads?
>>>
>>>
>>>
>>> Warren
>>>
>>
>>
>