simple.pg of polygraph-2.8.1 on linux
Ashwani Wason <[email protected]>
| Newsgroups | gmane.comp.web.web-polygraph.user |
|---|---|
| Organization | Bytemobile, Inc. |
| Message-ID | <1119466200.4065.43.camel@ash> |
Hi,
I am pretty much following the instructions in the user manual of
polygraph-2.8.1 for using the default simple.pg, which sets up a server
on 127.0.0.1:9090 and client on 127.0.0.1. I am on Fedora (post core 4)
Linux.
The client fails to connect to the server. I changed the IP addresses so
that the client and the server run on different machines, but still I
get the same error. I searched the list archives and web for this error
but did not find much info.
Here is some output from the client:
Running: "/usr/local/polygraph/bin/polyclt
--config /home/awason/polygraph/workloads/simple.pg
--cfg_dirs /home/awason/polygraph/workloads/include --verb_lvl 10"...
gadgets.cc:282: (s0) Success
gadgets.cc:282: (s0) Success
gadgets.cc:282: (s0) Success
/usr/local/polygraph/bin/polyclt: warning: no run phases were specified;
generating and using default phase
PolyApp.cc:720: (s0) Success
000.01| dynamic modules loaded: 0
000.02| Command: /usr/local/polygraph/bin/polyclt
--config /home/awason/polygraph/workloads/simple.pg
--cfg_dirs /home/awason/polygraph/workloads/include --verb_lvl 10
000.02| Configuration:
version: 2.8.1
host_type: i686-pc-linux-gnu
verb_lvl: 10
dump: err,
dump_size: 1.000KB
notify: <none>
doorman_listen_at: <none>
doorman_send_to: <none>
label: [none]
fd_limit: 983
config: /home/awason/polygraph/workloads/simple.pg
cfg_dirs: /home/awason/polygraph/workloads/include
console: -
log: [none]
log_buf_size: -1Bytes
store_working_set: [none]
load_working_set: [none]
sample_log: [none]
sample_log_buf_size:-1Bytes
accept_foreign_msgs:off
stats_cycle: 5.00sec
file_scan: poll
priority_sched: 5
fake_hosts:
delete_old_addrs: yes
idle_tout: <none>
local_rng_seed: 1
global_rng_seed: 1
unique_world: on
proxy: <none>
ports: <none>
loadable_modules:
icp_tout: 2.00sec
ign_false_hits: on
ign_bad_cont_tags: off
prn_false_misses: off
000.02| Server content distributions:
Server S101:
content planned% likely% error% mean_sz_bytes
some-content 100.00 100.00 0.00
13326.41
expected average server-side cachability: 80.00%
expected average server-side object size: 13326.41Bytes
000.02| Phases:
phase pop_beg pop_end load_beg load_end rec_beg rec_end
smsg_beg smsg_end goal flags
dflt 1.00 1.00 1.00 1.00 1.00 1.00
1.00 1.00 <none>
000.02| StatsSamples:
static stats samples: 0
dynamic stats samples: 0
gadgets.cc:282: (s0) Success
gadgets.cc:282: (s0) Success
000.02| FDs: 1024 out of 1024 FDs can be used; safeguard limit: 983
000.02| resource usage:
CPU Usage: 71msec sys + 1.66sec user = 1.73sec
Page faults with physical i/o: 3
000.02| group-id: 0c586135.2b222de0:00000004 pid: 11744
000.02| current time: 1119464324.170414 or Wed, 22 Jun 2005 18:18:44 GMT
000.02| registered client-side session watches: 0
000.02| registered client-side data filters: 0
000.02| fyi: PGL configuration stored (370bytes)
000.02| fyi: no bench selected with use(); will not attempt to create
agent addresses
000.02| created 1 agents total
000.02| Robot R101 [1 / 0c586135.2b222de0:00000006] at 127.0.0.1
000.02| fyi: current state (1) stored
000.02| fyi: max local population size: 1 robots
000.02| Connection.cc:136: error: 1/1 (s22) Invalid argument
000.02| Client.cc:306: error: 1/2 (c59) failed to establish a connection
000.02| 127.0.0.1 failed to connect to 127.0.0.1:9090
000.02| fyi: reached max local population size: 1 robots
000.02| Connection.cc:136: error: 2/3 (s22) Invalid argument
000.02| Client.cc:306: error: 2/4 (c59) failed to establish a connection
..
..
Output from the server:
Running: "/usr/local/polygraph/bin/polysrv
--config ./workloads/simple.pg --cfg_dirs ./workloads/include --verb_lvl
10"...
gadgets.cc:282: (s0) Success
gadgets.cc:282: (s0) Success
gadgets.cc:282: (s0) Success
/usr/local/polygraph/bin/polysrv: warning: no run phases were specified;
generating and using default phase
PolyApp.cc:720: (s0) Success
000.02| Command: /usr/local/polygraph/bin/polysrv
--config ./workloads/simple.pg --cfg_dirs ./workloads/include --verb_lvl
10
000.02| Configuration:
version: 2.8.1
host_type: i686-pc-linux-gnu
verb_lvl: 10
dump: err,
dump_size: 1.000KB
notify: <none>
doorman_listen_at: <none>
doorman_send_to: <none>
label: [none]
fd_limit: 983
config: ./workloads/simple.pg
cfg_dirs: ./workloads/include
console: -
log: [none]
log_buf_size: -1Bytes
store_working_set: [none]
load_working_set: [none]
sample_log: [none]
sample_log_buf_size:-1Bytes
accept_foreign_msgs:off
stats_cycle: 5.00sec
file_scan: poll
priority_sched: 5
fake_hosts:
delete_old_addrs: yes
idle_tout: 5.00min
local_rng_seed: 1
global_rng_seed: 1
unique_world: on
ign_urls: off
000.02| Server content distributions:
Server S101:
content planned% likely% error% mean_sz_bytes
some-content 100.00 100.00 0.00
13326.41
expected average server-side cachability: 80.00%
expected average server-side object size: 13326.41Bytes
000.02| Phases:
phase pop_beg pop_end load_beg load_end rec_beg rec_end
smsg_beg smsg_end goal flags
dflt 1.00 1.00 1.00 1.00 1.00 1.00
1.00 1.00 <none>
000.02| StatsSamples:
static stats samples: 0
dynamic stats samples: 0
gadgets.cc:282: (s0) Success
gadgets.cc:282: (s0) Success
000.02| FDs: 1024 out of 1024 FDs can be used; safeguard limit: 983
000.02| resource usage:
CPU Usage: 57msec sys + 1.64sec user = 1.70sec
Page faults with physical i/o: 12
000.02| group-id: 0c586126.5eff2dda:00000004 pid: 11738
000.02| current time: 1119464309.832712 or Wed, 22 Jun 2005 18:18:29 GMT
000.02| fyi: PGL configuration stored (370bytes)
000.02| fyi: no bench selected with use(); will not attempt to create
agent addresses
000.02| created 1 agents total
000.02| Server S101 [1 / 0c586126.5eff2dda:00000006] at 127.0.0.1:9090
HTTP/1.1
000.02| fyi: current state (1) stored
000.02| starting 1 HTTP agents...
000.10| i-dflt 0 0.00 -1 -1.00 0 1
000.19| i-dflt 0 0.00 -1 -1.00 0 1
..
..
I can telnet to that address and port.
[root@ash ~]# telnet 127.0.0.1 9090
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
GET
Connection closed by foreign host.
Thanks,
Ashwani
This e-mail and any attachments may contain confidential and
privileged information. If you are not the intended recipient,
please notify the sender immediately by return e-mail, do not forward
this email to any other person, delete this
e-mail and destroy all copies. Any dissemination or use of this
information by a person other than the intended recipient is
unauthorized and may be illegal.