Re: [webmin-devel] RPC webmin
hahmed <[email protected]> Mon, 27 Apr 2009 05:54:08 +0200
| Newsgroups | gmane.comp.web.webmin.devel |
|---|---|
| Message-ID | <[email protected]> |
the objective is to centralize the administration of iptables and snort by one single interface. Through this interface, I should be able to administrate any snort and iptables installed on a PC in the LAN, and centralize the log of iptables and snort to one single DataBase Server and then be able to correlate their log to identify if there is a potential attack, a rule is set on the firewall automatically. (I know that I need to install webmin and the requested modules on the PCs on the LAN in order to make RPC calls) thx a lot regards h.ahmed 2009/4/27 Jamie Cameron <[email protected]> > > Could you give us some idea of what the overall objective of your module > is? > I can then perhaps suggest the best functions to use.. > > On 26/Apr/2009 01:32 hahmed wrote .. > > Hi, > I'm trying to make a button to show the hosts on which the user the > configs > to be installed like the button > install on in the cluster software module. I found the function > create_on_input but it shows a void list ine the browser. > Can u help me on this please or give a more detailed documentation on the > cluster functions. > THX a lot :) > 2009/4/23 Jamie Cameron <[1][email protected]> > > You could write your own module to do this, but it would be a fair > bit > of > work. It may be simpler to just login to Webmin on the remote systems > and > manage them separately, if you want them to all have different > configs.. > On 23/Apr/2009 11:33 hahmed wrote .. > > I'm trying to configure remotely the snort IDS, edit its config, start > a > scan, edit rules but REMOTELY through the Webmin RPC. > ANd do the same thing with the firewall iptables. I found the firewall > module but when it applies the configuration it is sent to all the > webmin > servers configured in the cluster, but I want to have the ability to > choose > which one is concerned by this config. Another problem is that the > config > displayed in the index of the firewall module is the one of the master, > but > I want to choose which host to display its config. > Is it doable? > THX for the reply > regards, > hahmed > > 2009/4/23 hahmed <[1][2][email protected]> > > I'm trying to configure remotely the snort IDS, edit its config, start > a > scan, edit rules but REMOTELY through the Webmin RPC. > ANd do the same thing with the firewall iptables. > Is it doable? > Thx for the reply. > > 2009/4/23 Jamie Cameron <[2][3][email protected]> > > On 23/Apr/2009 00:24 hahmed wrote .. > > Hi, > > I was wondering if anyone has tried the Webmin RPC to develop a > module. > > I'm willing to use it with snort and asking for some tips. > > THX > > have a nice day > Could you explain more about what you are trying to do with Webmin's > RPC? > - Jamie > > > -------------------------------------------------------------------------- > ---- > Stay on top of everything new and different, both inside and > around Java (TM) technology - register by April 22, and save > $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. > 300 plus technical and hands-on sessions. Register today. > > Use priority code J9JMT32. [3][4]http://p.sf.net/sfu/p > - > Forwarded by the Webmin development list at > [4][5][email protected] > > To remove yourself from this list, go to > > [5][6]http://lists.sourceforge.net/lists/listinfo/webadmin-devel > -- > Ahmed Hamouda > [6][7]http://www.fedora-tunisia.org/ > [7][8]http://forums.fedora-fr.org/ > -- > Ahmed Hamouda > [8][9]http://www.fedora-tunisia.org/ > [9][10]http://forums.fedora-fr.org/ > 1. > > file://localhost/home/webmail/homes/jcameron/.tmp/reply_mail.cgi?new=1&to= > dimmumeister%40gmail%2Ecom > 2. > > file://localhost/home/webmail/homes/jcameron/.tmp/reply_mail.cgi?new=1&to= > jcameron%40webmin%2Ecom > 4. > > file://localhost/home/webmail/homes/jcameron/.tmp/reply_mail.cgi?new=1&to= > webmin%2Ddevel%40webmin%2Ecom > > You could write your own module to do this, but it would be a fair bit > of > work. It may be simpler to just login to Webmin on the remote systems > and > manage them separately, if you want them to all have different > configs.. > > On 23/Apr/2009 11:33 hahmed wrote .. > > I'm trying to configure remotely the snort IDS, edit its config, start a > scan, edit rules but REMOTELY through the Webmin RPC. > ANd do the same thing with the firewall iptables. I found the firewall > module but when it applies the configuration it is sent to all the webmin > servers configured in the cluster, but I want to have the ability to > choose > which one is concerned by this config. Another problem is that the config > displayed in the index of the firewall module is the one of the master, > but > I want to choose which host to display its config. > Is it doable? > THX for the reply > regards, > hahmed > 2009/4/23 hahmed <[11][email protected]> > > I'm trying to configure remotely the snort IDS, edit its config, start a > scan, edit rules but REMOTELY through the Webmin RPC. > ANd do the same thing with the firewall iptables. > Is it doable? > Thx for the reply. > 2009/4/23 Jamie Cameron <[12][email protected]> > > On 23/Apr/2009 00:24 hahmed wrote .. > > > Hi, > > I was wondering if anyone has tried the Webmin RPC to develop a module. > > I'm willing to use it with snort and asking for some tips. > > THX > > have a nice day > > Could you explain more about what you are trying to do with Webmin's > RPC? > - Jamie > > -------------------------------------------------------------------------- > ---- > Stay on top of everything new and different, both inside and > around Java (TM) technology - register by April 22, and save > $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. > 300 plus technical and hands-on sessions. Register today. > Use priority code J9JMT32. [13]http://p.sf.net/sfu/p > - > Forwarded by the Webmin development list at [14] > [email protected] > To remove yourself from this list, go to > [15]http://lists.sourceforge.net/lists/listinfo/webadmin-devel > > -- > Ahmed Hamouda > [16]http://www.fedora-tunisia.org/ > [17]http://forums.fedora-fr.org/ > > -- > Ahmed Hamouda > [18]http://www.fedora-tunisia.org/ > [19]http://forums.fedora-fr.org/ > > > -------------------------------------------------------------------------- > ---- > Crystal Reports - New Free Runtime and 30 Day Trial > Check out the new simplified licensign option that enables unlimited > royalty-free distribution of the report engine for externally > facing > server and web deployment. > [20]http://p.sf.net/sfu/businessobjects > - > Forwarded by the Webmin development list at [21] > [email protected] > To remove yourself from this list, go to > [22]http://lists.sourceforge.net/lists/listinfo/webadmin-devel > > -- > Ahmed Hamouda > [23]http://www.fedora-tunisia.org/ > [24]http://forums.fedora-fr.org/ > > > 1. > file://localhost/home/webmail/homes/jcameron/.tmp/reply_mail.cgi?new=1&to=jcameron%40webmin%2Ecom > 2. > file://localhost/home/webmail/homes/jcameron/.tmp/reply_mail.cgi?new=1&to=dimmumeister%40gmail%2Ecom > 3. > file://localhost/home/webmail/homes/jcameron/.tmp/reply_mail.cgi?new=1&to=jcameron%40webmin%2Ecom > 5. > file://localhost/home/webmail/homes/jcameron/.tmp/reply_mail.cgi?new=1&to=webmin%2Ddevel%40webmin%2Ecom > 21. > file://localhost/home/webmail/homes/jcameron/.tmp/reply_mail.cgi?new=1&to=webmin%2Ddevel%40webmin%2Ecom > > Could you give us some idea of what the overall objective of your module > is? I can then perhaps suggest the best functions to use.. > > On 26/Apr/2009 01:32 hahmed wrote .. > > Hi, > I'm trying to make a button to show the hosts on which the user the configs > to be installed like the button > install on in the cluster software module. I found the function > create_on_input but it shows a void list ine the browser. > Can u help me on this please or give a more detailed documentation on the > cluster functions. > THX a lot :) > > 2009/4/23 Jamie Cameron <[email protected]<http://reply_mail.cgi?new=1&to=jcameron%40webmin%2Ecom> > > > >> >> You could write your own module to do this, but it would be a fair bit >> of >> work. It may be simpler to just login to Webmin on the remote systems >> and >> manage them separately, if you want them to all have different configs.. >> >> On 23/Apr/2009 11:33 hahmed wrote .. >> >> I'm trying to configure remotely the snort IDS, edit its config, start a >> scan, edit rules but REMOTELY through the Webmin RPC. >> ANd do the same thing with the firewall iptables. I found the firewall >> module but when it applies the configuration it is sent to all the >> webmin >> servers configured in the cluster, but I want to have the ability to >> choose >> which one is concerned by this config. Another problem is that the >> config >> displayed in the index of the firewall module is the one of the master, >> but >> I want to choose which host to display its config. >> Is it doable? >> THX for the reply >> regards, >> hahmed >> 2009/4/23 hahmed <[1][email protected]<http://reply_mail.cgi?new=1&to=dimmumeister%40gmail%2Ecom> >> > >> >> I'm trying to configure remotely the snort IDS, edit its config, start a >> scan, edit rules but REMOTELY through the Webmin RPC. >> ANd do the same thing with the firewall iptables. >> Is it doable? >> Thx for the reply. >> 2009/4/23 Jamie Cameron <[2][email protected]<http://reply_mail.cgi?new=1&to=jcameron%40webmin%2Ecom> >> > >> >> On 23/Apr/2009 00:24 hahmed wrote .. >> >> > Hi, >> > I was wondering if anyone has tried the Webmin RPC to develop a >> module. >> > I'm willing to use it with snort and asking for some tips. >> > THX >> > have a nice day >> >> Could you explain more about what you are trying to do with Webmin's >> RPC? >> - Jamie >> >> -------------------------------------------------------------------------- >> ---- >> Stay on top of everything new and different, both inside and >> around Java (TM) technology - register by April 22, and save >> $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. >> 300 plus technical and hands-on sessions. Register today. >> Use priority code J9JMT32. [3]http://p.sf.net/sfu/p >> - >> Forwarded by the Webmin development list at [4] >> [email protected]<http://reply_mail.cgi?new=1&to=webmin%2Ddevel%40webmin%2Ecom> >> To remove yourself from this list, go to >> [5]http://lists.sourceforge.net/lists/listinfo/webadmin-devel >> >> -- >> Ahmed Hamouda >> [6]http://www.fedora-tunisia.org/ >> [7]http://forums.fedora-fr.org/ >> >> -- >> Ahmed Hamouda >> [8]http://www.fedora-tunisia.org/ >> [9]http://forums.fedora-fr.org/ >> >> >> 1. >> file://localhost/home/webmail/homes/jcameron/.tmp/reply_mail.cgi?new=1&to=dimmumeister%40gmail%2Ecom >> 2. >> file://localhost/home/webmail/homes/jcameron/.tmp/reply_mail.cgi?new=1&to=jcameron%40webmin%2Ecom >> 4. >> file://localhost/home/webmail/homes/jcameron/.tmp/reply_mail.cgi?new=1&to=webmin%2Ddevel%40webmin%2Ecom >> >> You could write your own module to do this, but it would be a fair bit of >> work. It may be simpler to just login to Webmin on the remote systems and >> manage them separately, if you want them to all have different configs.. >> >> On 23/Apr/2009 11:33 hahmed wrote .. >> >> I'm trying to configure remotely the snort IDS, edit its config, start a >> scan, edit rules but REMOTELY through the Webmin RPC. >> ANd do the same thing with the firewall iptables. I found the firewall >> module but when it applies the configuration it is sent to all the webmin >> servers configured in the cluster, but I want to have the ability to >> choose which one is concerned by this config. Another problem is that the >> config displayed in the index of the firewall module is the one of the >> master, but I want to choose which host to display its config. >> Is it doable? >> THX for the reply >> regards, >> hahmed >> >> 2009/4/23 hahmed <[email protected]<http://reply_mail.cgi?new=1&to=dimmumeister%40gmail%2Ecom> >> > >> >>> I'm trying to configure remotely the snort IDS, edit its config, start a >>> scan, edit rules but REMOTELY through the Webmin RPC. >>> ANd do the same thing with the firewall iptables. >>> Is it doable? >>> Thx for the reply. >>> >>> 2009/4/23 Jamie Cameron <[email protected]<http://reply_mail.cgi?new=1&to=jcameron%40webmin%2Ecom> >>> > >>> >>> On 23/Apr/2009 00:24 hahmed wrote .. >>>> > Hi, >>>> > I was wondering if anyone has tried the Webmin RPC to develop a >>>> module. >>>> > I'm willing to use it with snort and asking for some tips. >>>> > THX >>>> > have a nice day >>>> >>>> Could you explain more about what you are trying to do with Webmin's >>>> RPC? >>>> >>>> - Jamie >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> Stay on top of everything new and different, both inside and >>>> around Java (TM) technology - register by April 22, and save >>>> $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. >>>> 300 plus technical and hands-on sessions. Register today. >>>> Use priority code J9JMT32. http://p.sf.net/sfu/p >>>> - >>>> Forwarded by the Webmin development list at [email protected]<http://reply_mail.cgi?new=1&to=webmin%2Ddevel%40webmin%2Ecom> >>>> To remove yourself from this list, go to >>>> http://lists.sourceforge.net/lists/listinfo/webadmin-devel >>>> >>> >>> >>> >>> -- >>> Ahmed Hamouda >>> >>> http://www.fedora-tunisia.org/ >>> http://forums.fedora-fr.org/ >>> >>> >>> >> >> >> -- >> Ahmed Hamouda >> >> http://www.fedora-tunisia.org/ >> http://forums.fedora-fr.org/ >> >> >> >> >> >> ------------------------------------------------------------------------------ >> Crystal Reports - New Free Runtime and 30 Day Trial >> Check out the new simplified licensign option that enables unlimited >> royalty-free distribution of the report engine for externally facing >> server and web deployment. >> http://p.sf.net/sfu/businessobjects >> - >> Forwarded by the Webmin development list at [email protected]<http://reply_mail.cgi?new=1&to=webmin%2Ddevel%40webmin%2Ecom> >> To remove yourself from this list, go to >> http://lists.sourceforge.net/lists/listinfo/webadmin-devel >> >> > > > -- > Ahmed Hamouda > > http://www.fedora-tunisia.org/ > http://forums.fedora-fr.org/ > > > > > > ------------------------------------------------------------------------------ > Crystal Reports - New Free Runtime and 30 Day Trial > Check out the new simplified licensign option that enables unlimited > royalty-free distribution of the report engine for externally facing > server and web deployment. > http://p.sf.net/sfu/businessobjects > - > Forwarded by the Webmin development list at [email protected] > To remove yourself from this list, go to > http://lists.sourceforge.net/lists/listinfo/webadmin-devel > > -- Ahmed Hamouda http://www.fedora-tunisia.org/ http://forums.fedora-fr.org/ ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects - Forwarded by the Webmin development list at [email protected] To remove yourself from this list, go to http://lists.sourceforge.net/lists/listinfo/webadmin-devel