Installation von Add Ons

Hi, 

Hier nochmal mit richtigem Tread:


Also, da fangen die Probleme an, ist klar, wenn man keine ordentliche
und verständliche Dokumentation vorfindet.

Will ZB Gallery Portlet installieren, habe die Zeilen unter:

eggs = ...
       se.portlet.gallery

zcml = ...
       se.portlet.gallery

in die /zinstance/buildout.cfg eingefügt und heraus kommt bei ./bin/buildout:


istvan@istvan-laptop:~/CMS/Plone/zinstance$ ./bin/buildout 
While:
  Initializing.

An internal error occured due to a bug in either zc.buildout or in a
recipe being used:
Traceback (most recent call last):
  File
"/home/istvan/CMS/Plone/Python-2.4/lib/python2.4/site-packages/zc.buildout-1.4.2-py2.4.egg/zc/buildout/buildout.py", line 1659, in main
    user_defaults, windows_restart, command)
  File
"/home/istvan/CMS/Plone/Python-2.4/lib/python2.4/site-packages/zc.buildout-1.4.2-py2.4.egg/zc/buildout/buildout.py", line 182, in __init__
    data['buildout'].copy(), override))
  File
"/home/istvan/CMS/Plone/Python-2.4/lib/python2.4/site-packages/zc.buildout-1.4.2-py2.4.egg/zc/buildout/buildout.py", line 1313, in _open
    parser.readfp(fp)
  File
"/home/istvan/CMS/Plone/Python-2.4/lib/python2.4/ConfigParser.py", line
286, in readfp
    self._read(fp, filename)
  File
"/home/istvan/CMS/Plone/Python-2.4/lib/python2.4/ConfigParser.py", line
490, in _read
    raise e
ParsingError: File contains parsing
errors: /home/istvan/CMS/Plone/zinstance/buildout.cfg
	[line 240]: 'se.portlet.gallery\n'
	[line 246]: 'se.portlet.gallery\n'

Wo finde ich das ordentlich beschrieben, wie genau man hier vorgeht, und
wo innerhalb von Plone finde ich dann die installierte galerie?

Muß ich das egg erst downloaden, und wo genau dann hinpacken??

mfg i.

PS: ... hab ich nicht mit eingegeben, die ganze buildout.cfg sieht jezt so aus:

############################################
#
# Buildout Configuration File for Standalone Plone
# ------------------------------------------------
# $LastChangedDate: 2010-01-17 14:46:49 -0800 (Sun, 17 Jan 2010) $ $LastChangedRevision: 33211 $
#
# After making changes in this configuration file,
# you should run bin/buildout to update the components.
# 
# ALWAYS back up all Plone/Zope data and components
# before changing configuration.
# 
# Running "bin/buildout" will update your installation,
# installing missing components as necessary.
# 
# Use "bin/buildout -n" to update many components here to the newest
# available releases.
# This will update the add-on products you've added in the eggs= lines.
# This will not, however, upgrade Plone itself (or anything else you've
# pinned with a version specification). To upgrade Plone itself, see the
# comments in "Plone Component Versions".
#
# Tutorial instructions for using zc.buildout for
# configuration management are available at:
# http://plone.org/documentation/tutorial/buildout
# Full details at http://pypi.python.org/pypi/zc.buildout
#
############################################


[buildout]

############################################
# Plone Component Versions
# ------------------------
# This version of the Unified Installer has the components
# of Plone 3.3.4 preloaded so that it can install without
# an Internet connection.
# If you want to update, uncomment the "extends = http://..." below,
# edit it to point to the current version URL,
# comment out the "extends = versions.cfg" line
# and run "bin/buildout -n" while attached to the Internet.
# Generally, you only want to do that as part
# of a planned migration.
#
# extends = http://dist.plone.org/release/3.3.4/versions.cfg
extends = versions.cfg
versions = versions

# This extension will dump a list of unpinned versions
# each time you run buildout.
extensions = buildout.dumppickedversions


############################################
# Ports
# -----
# Specify the port on which your Zope installation
# will listen:
http-address = 8080


############################################
# Eggs
# ----
# Add an indented line to the eggs section for any Python
# eggs or packages you wish to include.
#
eggs =
    Plone

# Optional Functionality
# ----------------------
# Uncomment the indented lines to include these products.
# Documentation on all of them, along with many more products,
# is available at
# http://plone.org/products/
#
# Commonly used products:
# * LinguaPlone provides tools for building multi-lingual sites
# * Products.CacheSetup adds the "CacheFu" Plone speedup kit
# * PloneHelpCenter is a simple knowledge base
# * PloneFormGen provides through-the-web form building
#
#    Products.LinguaPlone
#    Products.CacheSetup
#    Products.PloneHelpCenter
#    Products.PloneFormGen
#
# Commonly used development tools:
# * Clouseau uses AJAX to provide a Python prompt inside Plone
# * DocFinderTab puts an object documentation inspector in the Zope Management Interface
# * Gloworm is a Firebug-like viewlet inspector and customizer
# * plone.reload allows you to refresh Python code and ZCML configuration
#   without restarting Zope. Note that to use plone.reload, you'll also
#   need to uncomment the "zcml" entry for it below.
#
#    Products.Clouseau
#    Products.DocFinderTab
#    Products.Gloworm
#    plone.reload

    
############################################
# ZCML Slugs
# ----------
# Some eggs need ZCML slugs to tell Zope to
# use them. Eggs with names beginning with "Products."
# usually don't need this.
zcml =
#    plone.reload

    
############################################
# Development Eggs
# ----------------
# You can use paster to create "development eggs" to
# develop new products/themes. Put these in the src/
# directory.
# You will also need to add the egg names in the
# eggs section above, and may also need to add them
# to the zcml section.
#
# Provide the *paths* to the eggs you are developing here:
develop =
#    src/my.package


############################################
# Debug Mode
# ----------
# Change debug-mode to "on" to run in development mode.
# 
debug-mode = off


############################################
# Backup Directory
# ----------------
# Sets the target directory for the bin/backup and bin/snapshotbackup
# commands. Default is inside this project's var directory, but ideally
# this should be on a separate volume or backup server.
# 
backups-dir=${buildout:directory}/var



############################################
############################################
# Buildout instructions beyond this point are
# usually only changed by experienced developers.
#
# Beyond here there be dragons!


eggs-directory=/home/istvan/CMS/Plone/buildout-cache/eggs
download-cache=/home/istvan/CMS/Plone/buildout-cache/downloads
newest = false
parts =
    zope2
    productdistros
    instance
    zopepy
    zopeskel
    precompile
    chown
    unifiedinstaller
    backup

# Add additional egg download sources here. dist.plone.org contains archives
# of Plone packages.
find-links =
    http://dist.plone.org
    http://download.zope.org/ppix/
    http://download.zope.org/distribution/
    http://effbot.org/downloads

# unzip all eggs for easier debugging
unzip = true

# let's share our Zope install
zope-directory = /home/istvan/CMS/Plone


# This section installs the components of Zope 2.
# Zope operating instances are created elsewhere.
# For options see http://pypi.python.org/pypi/plone.recipe.zope2install
[zope2]
recipe = plone.recipe.zope2install
# update zope by updating this URL:
url = ${versions:zope2-url}
# fake eggs are required to satisfy Zope dependencies while
# zope is not yet eggified.
fake-zope-eggs = true
additional-fake-eggs =
    ZConfig
    pytz


# Use this section to download additional old-style products.
# List any number of URLs for product tarballs under URLs (separate
# with whitespace, or break over several lines, with subsequent lines
# indented). If any archives contain several products inside a top-level
# directory, list the archive file name (i.e. the last part of the URL, 
# normally with a .tar.gz suffix or similar) under 'nested-packages'.
# If any archives extract to a product directory with a version suffix, list
# the archive name under 'version-suffix-packages'.
# For options see http://pypi.python.org/pypi/plone.recipe.distros
[productdistros]
recipe = plone.recipe.distros
urls =
nested-packages =
version-suffix-packages = 


# Use this section to install and configure a Zope operating
# instance.
# For options see http://pypi.python.org/pypi/plone.recipe.zope2instance
[instance]
recipe = plone.recipe.zope2instance
zope2-location = ${zope2:location}
# The line below sets only the initial password. It will not change an
# existing password.
user = admin:admin
http-address = ${buildout:http-address}
# change debug-mode to "on" to run in development mode
debug-mode = ${buildout:debug-mode}
# change verbose-security to "on" for detailed security
# errors while developing
verbose-security = off
# change deprecation-warnings to "on" to get log warnings
# for deprecated usages.
deprecation-warnings = off


# If you want Zope to know about any additional eggs, list them here.
# e.g. eggs = ${buildout:eggs} my.package
eggs =
    ${buildout:eggs}
se.portlet.gallery

# If you want to register ZCML slugs for any packages, list them here.
# e.g. zcml = my.package my.other.package
zcml = 
    ${buildout:zcml}
se.portlet.gallery


products =
    ${buildout:directory}/products
    ${productdistros:location}


# You may also control the environment variables for the instance.
environment-vars =
    PYTHON_EGG_CACHE ${buildout:directory}/var/.python-eggs


# installs a zopepy python interpreter that runs with your
# full Zope environment
[zopepy]
recipe = zc.recipe.egg
eggs = ${instance:eggs}
interpreter = zopepy
extra-paths = ${instance:zope2-location}/lib/python
scripts = zopepy


# installs paster and Zopeskel
[zopeskel]
recipe = zc.recipe.egg
eggs =
    PasteScript
    ZopeSkel


# compiles .py files in ./parts and ./products so that they don't
# need to be compiled by the daemon
# For options see http://pypi.python.org/pypi/plone.recipe.precompiler
[precompile]
recipe = plone.recipe.precompiler


# This recipe is used to set permissions -- and ownership for root mode installs
# For options see http://pypi.python.org/pypi/plone.recipe.command
[chown]
recipe = plone.recipe.command
command =chmod 600 .installed.cfg
update-command = ${chown:command}


# This recipe installs the plonectl script and a few other convenience
# items.
# For options see http://pypi.python.org/pypi/plone.recipe.unifiedinstaller
[unifiedinstaller]
recipe = plone.recipe.unifiedinstaller<=4.0dev
user = ${instance:user}
primary-port = ${instance:http-address}
sudo-command = 


# This recipe builds the backup, restore and snapshotbackup commands.
# For options see http://pypi.python.org/pypi/collective.recipe.backup
[backup]
recipe = collective.recipe.backup
location = ${buildout:backups-dir}/backups
snapshotlocation = ${buildout:backups-dir}/snapshotbackups


[versions]
Cheetah = 2.0.1
Paste = 1.7.2
PasteScript = 1.7.3
ZopeSkel = 2.11.1
collective.recipe.backup = 1.1
plone.recipe.command = 1.0
plone.recipe.distros = 1.5
plone.recipe.osxcontroller = 0.3
plone.recipe.precompiler = 0.3
plone.recipe.unifiedinstaller = 0.9
collective.recipe.zope2cluster = 1.0
PasteDeploy = 1.3.3
zc.recipe.egg = 1.2.2



_______________________________________________
zope mailing list
[email protected]
https://mail.dzug.org/mailman/listinfo/zope