| Newsgroups |
gmane.comp.window-managers.stumpwm.devel |
| Message-ID |
<[email protected]> |
This is as it was when it crashed (again). Actually it left the system
a bit messed up, so had to restart X.
xrandr --verbose
Screen 0: minimum 8 x 8, current 1024 x 768, maximum 8192 x 8192
VGA-0 disconnected primary (normal left inverted right x axis y axis)
Identifier: 0x249
Timestamp: 3222902
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
BorderDimensions: 4
supported: 4
Border: 0 0 0 0
range: (0, 65535)
SignalFormat: VGA
supported: VGA
ConnectorType: VGA
ConnectorNumber: 1
_ConnectorLocation: 1
TV-0 connected 1024x768+0+0 (0x24b) normal (normal left inverted right
x axis y axis) 0mm x 0mm
Identifier: 0x24a
Timestamp: 3222902
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
BorderDimensions: 4
supported: 4
Border: 0 0 0 0
range: (0, 65535)
SignalFormat: unknown
supported: unknown
ConnectorType: TV
ConnectorNumber: 2
_ConnectorLocation: 3
1024x768 (0x24b) 64.1MHz -HSync +VSync *current +preferred
h: width 1024 start 1080 end 1184 total 1344 skew 0 clock
47.7KHz
v: height 768 start 769 end 772 total 795 clock
60.0Hz
800x600 (0x24c) 38.2MHz -HSync +VSync
h: width 800 start 832 end 912 total 1024 skew 0 clock
37.3KHz
v: height 600 start 601 end 604 total 622 clock
60.0Hz
720x480 (0x24d) 26.7MHz -HSync +VSync
h: width 720 start 736 end 808 total 896 skew 0 clock
29.8KHz
v: height 480 start 481 end 484 total 497 clock
60.0Hz
640x480 (0x24e) 23.9MHz -HSync +VSync
h: width 640 start 656 end 720 total 800 skew 0 clock
29.8KHz
v: height 480 start 481 end 484 total 497 clock
60.0Hz
640x400 (0x24f) 19.5MHz -HSync +VSync
h: width 640 start 648 end 712 total 784 skew 0 clock
24.9KHz
v: height 400 start 401 end 404 total 415 clock
60.0Hz
512x384 (0x250) 14.9MHz -HSync +VSync
h: width 512 start 520 end 568 total 624 skew 0 clock
23.9KHz
v: height 384 start 385 end 388 total 398 clock
60.0Hz
LVDS-0 connected 1024x768+0+0 (0x252) normal (normal left inverted
right x axis y axis) 367mm x 230mm
Identifier: 0x251
Timestamp: 3222902
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff004ca3553100000000
00110103802517780a87f594574f8c27
27505400000001010101010101010101
0101010101014f40803471b020403020
36006fe6100000190000000f00000000
000000000046d2026400000000fe0047
523433330431373055310a20000000fe
00202d383e5a80aeff02010a20200093
BorderDimensions: 4
supported: 4
Border: 160 0 160 0
range: (0, 65535)
SignalFormat: LVDS
supported: LVDS
ConnectorType: Panel
ConnectorNumber: 0
_ConnectorLocation: 0
1920x1200 (0x252) 164.6MHz -HSync -VSync *current +preferred
h: width 1920 start 1968 end 2000 total 2228 skew 0 clock
73.9KHz
v: height 1200 start 1203 end 1209 total 1232 clock
60.0Hz
[email protected]
-----Original Message-----
From: David Bjergaard <[email protected]>
To: iii_iii <[email protected]>
Cc: Stumpwm-devel <[email protected]>
Sent: Sat, Apr 26, 2014 7:21 pm
Subject: Re: [STUMP] Crash Report
Hi can you also send the xrandr output when the external monitor is
connected?
Dave
[email protected] writes:
> I am using Opensuse 12.3
>
> The kernel is 3.7.10-1.28-desktop #1 SMP PREEMPT Mon Feb 3 14:11:15
UTC
> 2014 (c9a2c6c) x86_64 x86_64 x86_64 GNU/Linux
>
> Name : sbcl
> Version : 1.1.2
> Release : 2.1.1
> Architecture: x86_64
> Install Date: Thu 20 Mar 2014 18:45:37 GMT
> Group : Development/Languages/Other
> Size : 68065565
> License : SUSE-Public-Domain and BSD-3-Clause
> Signature : RSA/SHA256, Mon 28 Jan 2013 07:18:41 GMT, Key ID
> b88b2fd43dbdc284
> Source RPM : sbcl-1.1.2-2.1.1.src.rpm
> Build Date : Mon 28 Jan 2013 07:16:56 GMT
> Build Host : build09
> Relocations : (not relocatable)
> Packager : http://bugs.opensuse.org
> Vendor : openSUSE
> URL : http://www.sbcl.org/
> Summary : Steel Bank Common Lisp
>
> To build, I followed the instructions in README.md. It was
> straight-forward as far as I remember. I was not able to build with
> clisp though.
>
> As I said I think it is quite likely that the nvidia driver is the
> culprit.
>
> Name : x11-video-nvidiaG03
> Version : 331.49
> Release : 29.1
> Architecture: x86_64
> Install Date: Sat 01 Mar 2014 16:30:24 GMT
> Group : System/Libraries
> Size : 89789946
> License : PERMISSIVE-OSI-COMPLIANT
> Signature : DSA/SHA1, Mon 24 Feb 2014 14:07:43 GMT, Key ID
> f5113243c66b6eae
> Source RPM : x11-video-nvidiaG03-331.49-29.1.nosrc.rpm
> Build Date : Tue 25 Feb 2014 12:48:04 GMT
> Build Host : nagios-abuild
> Relocations : (not relocatable)
> Vendor : obs://build.suse.de/home:sndirsch:drivers
> Summary : NVIDIA graphics driver for GeForce 8xxx and newer GPUs
>
> The system is a laptop Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
>
>
> [email protected]
>
>
> -----Original Message-----
> From: David Bjergaard <[email protected]>
> To: Joseph Mingrone <[email protected]>
> Cc: stumpwm-devel <[email protected]>
> Sent: Sat, Apr 26, 2014 6:05 pm
> Subject: Re: [STUMP] Crash Report
>
>
> I agree. Can you send details about how you built stumpwm?
Specifically
> which
> lisp version as well as what OS you are running?
>
> Dave
>
>> On Apr 26, 2014, at 12:31 PM, Joseph Mingrone <[email protected]> wrote:
>>
>> [email protected] writes:
>>
>>> Hi, I have received a crash. I haven't pasted the whole thing as I
> am not
> sure
>>> if it is worth it. I am using an nvidia driver, and I was trying to
> clone the
>>> display onto tv-out. There are warnings about the nvidia driver when
> I start
> the
>>> system but it works ok most of the time. I usually extend the
> desktop rather
>>> than clone.
>>>
>>>
>
_________________________________________________________________________
>
>
>>> ________
>>>
>>> The value NIL is not of type STUMPWM::FRAME.
>>> 0: (SB-DEBUG::MAP-BACKTRACE
>>> #<CLOSURE (LAMBDA # :IN SB-DEBUG:BACKTRACE) {10082AF3EB}>
>>> :START
>>> 0
>>> :COUNT
>>> 100)
>>> 1: (SB-DEBUG:BACKTRACE 100 #<SB-IMPL::STRING-OUTPUT-STREAM
> {10082AF313}>)
>>> 2: (STUMPWM::BACKTRACE-STRING)
>>> 3: (STUMPWM::PERFORM-TOP-LEVEL-ERROR-ACTION
>>> #<TYPE-ERROR expected-type: STUMPWM::FRAME datum: NIL>)
>>> 4: (SIGNAL #<TYPE-ERROR expected-type: STUMPWM::FRAME datum: NIL>)
>>> 5: (ERROR TYPE-ERROR :DATUM NIL :EXPECTED-TYPE STUMPWM::FRAME)
>>> 6: (SB-KERNEL::OBJECT-NOT-TYPE-ERROR-HANDLER
>>> #<unavailable argument>
>>> #.(SB-SYS:INT-SAP #X7FFFF6E1ED80)
>>> #<SB-ALIEN-INTERNALS:ALIEN-VALUE :SAP #X7FFFF6E1E900 :TYPE (*
>>>
> (SB-ALIEN:STRUCT
>>>
> SB-VM::OS-CONTEXT-T-STRUCT))>
>>> (149 21))
>>>
> ______________________________________________________________________
>>>
>>> [email protected]
>>
>> This appears related to https://github.com/stumpwm/stumpwm/issues/71.
>>
>>
>> _______________________________________________
>> Stumpwm-devel mailing list
>> [email protected]
>> https://lists.nongnu.org/mailman/listinfo/stumpwm-devel
>
> _______________________________________________
> Stumpwm-devel mailing list
> [email protected]
> https://lists.nongnu.org/mailman/listinfo/stumpwm-devel
>
>
>
>
> _______________________________________________
> Stumpwm-devel mailing list
> [email protected]
> https://lists.nongnu.org/mailman/listinfo/stumpwm-devel