Re: gui message problems

> would that be accessible for someone with a screenreader? 

It will be as other controls of GUI. 

> what do the numbers go up to?

The numbers make GUI readable for user.

Regards,
Valery

--- In [email protected], "damien c. sadler" <necdet@...> 
wrote:
>
> would that be accessible for someone with a screenreader? what do 
the numbers go up to?
> 
> regards,
> 
> damien
> 
> 
> 
> 
>   ----- Original Message ----- 
>   From: valery_vi 
>   To: [email protected] 
>   Sent: Monday, December 04, 2006 1:36 PM
>   Subject: [AutoIt] Re: gui message problems
> 
> 
>   damien,
> 
>   This is not hard to make layout of control in GUI, I think. 
>   I make it manually by the following empirical "method"
> 
>   1. Height of control is about 30 pixels.
>   2. Width of control is the length of textual content. So for 
example 
>   to make label "This is an example" I would set width - 250 or 
300 
>   pixels.
>   3. Left margin - 10 pixels
>   4. Y coordinate - Y coordinate of control above + maybe 10 
pixels.
> 
>   Thus we can make layout ie of two controls:
> 
>   1. Label "This is an example":
> 
>   10, 10, 250, 30
> 
>   These give us:
>   $Label = GUICtrlCreateLabel("What Note Is This?", 10, 10, 250, 
30)
> 
>   2. Radio "Music Machine":
> 
>   Left margin - 10
>   Y coordinate = 10 (previous Y) + 30 = 40
>   Width - 200
>   Height - 30
> 
>   So we will get:
>   10, 40, 200, 30
>   These give us:
>   $Radio1 = GUICtrlCreateRadio("Music Machine", 10, 40, 200, 30)
> 
>   2. Radio "My Music":
> 
>   Left margin - 10
>   Y coordinate = 40 (previous Y) + 30 = 70
>   Width - 200
>   Height - 30
> 
>   So we will get:
>   10, 40, 200, 30
>   These give us:
>   $Radio2 = GUICtrlCreateRadio("My Music", 10, 70, 200, 30)
> 
>   The second radio is the same as previous apart from it's Y 
position.
> 
>   And so on...
> 
>   I should add about GUI window. Width of window should be greater 
>   than longest control + it's left margin. We have here Label -
 "What 
>   Note Is This?". Length - 250 pixels. So I would create GUI with 
>   width 270 = Length + 20 (two left margins of longest control) 
and 
>   for example with 400 pixels in Height
> 
>   I should insert builded GUI constants by 
>   #include <GUIConstants.au3>
> 
>   Thus we will have the following:
> 
>   #include <GUIConstants.au3>
>   $hWnd = GUICreate ("Easy GUI", 270, 400)
>   $Label = GUICtrlCreateLabel("What Note Is This?", 10, 10, 100, 
30)
>   $Radio1 = GUICtrlCreateRadio("Music Machine", 10, 40, 200, 30)
>   $Radio2 = GUICtrlCreateRadio("My Music", 10, 70, 200, 30)
> 
>   The last thing which we need is to add magic "command" to show 
this 
>   GUI and main loop to get messages from Windows System:
> 
>   GUISetState()
>   While 1
>   $msg = GUIGetMsg()
>   If $msg = $GUI_EVENT_CLOSE Then ExitLoop
>   Wend
> 
>   Thus we have written this Easy GUI.
> 
>   #include <GUIConstants.au3>
>   $hWnd = GUICreate ("Easy GUI", 270, 400)
>   $Label = GUICtrlCreateLabel("What Note Is This?", 10, 10, 100, 
30)
>   $Radio1 = GUICtrlCreateRadio("Music Machine", 10, 40, 200, 30)
>   $Radio2 = GUICtrlCreateRadio("My Music", 10, 70, 200, 30)
> 
>   GUISetState()
>   While 1
>   $msg = GUIGetMsg()
>   If $msg = $GUI_EVENT_CLOSE Then ExitLoop
>   Wend
> 
>   Best wishes from Russia,
>   Valery
> 
>   --- In [email protected], "damien c. sadler" <necdet@> 
>   wrote:
>   >
>   > this is almost the same as what i use, but because i'm 
visually 
>   impaired i find it hard to know what positions to put the gui on 
the 
>   screen, and this lbc.au3 library does it for me, so i'm using 
that, 
>   which is very similar to what you just did. i can't understand 
why 
>   it's stating that there's no wend statement when there is.
>   > 
>   > but as you can do gui positioning ok i'll try this method.
>   > 
>   > thanks.
>   > 
>   > regards,
>   > 
>   > damien
>   > 
>   > 
>   > ----- Original Message ----- 
>   > From: valery_vi 
>   > To: [email protected] 
>   > Sent: Monday, December 04, 2006 6:11 AM
>   > Subject: [AutoIt] Re: gui message problems
>   > 
>   > 
>   > This one works fine for me:
>   > 
>   > #include <GUIConstants.au3>
>   > $hGUI = GUICreate("Test", 400, 300)
>   > 
>   > $mm=GUICtrlCreateRadio("Music Machine", 10, 0, 100, 30)
>   > $wnit=GUICtrlCreateRadio("What Note Is This?", 10, 30, 100, 30)
>   > $simon=GUICtrlCreateRadio("Simon", 10, 60, 100, 30)
>   > $fkey=GUICtrlCreateRadio("fire key", 10, 90, 100, 30)
>   > $mbi=GUICtrlCreateRadio("musical bop it", 10, 120, 100, 30)
>   > $mbox=GUICtrlCreateRadio("music box", 10, 150, 100, 30)
>   > $ok=GUICtrlCreateButton("&ok", 10, 180, 100, 30)
>   > $ccl=GUICtrlCreateButton("e&xit", 10, 210, 100, 30)
>   > GUISetState()
>   > while 1
>   > $msg=guigetmsg()
>   > if $msg=$ccl or $msg=$gui_event_close then exit
>   > if $msg=$ok then read_choice()
>   > wend
>   > 
>   > func read_choice()
>   > if guictrlread($mm)=$gui_checked then music_machine()
>   > if guictrlread($wnit)=$gui_checked then what_note_is_this()
>   > if guictrlread($simon)=$gui_checked then simon()
>   > if guictrlread($fkey)=$gui_checked then firekey()
>   > if guictrlread($mbi)=$gui_checked then musical_bop()
>   > if guictrlread($mbox)=$gui_checked then music_box()
>   > endfunc
>   > 
>   > Valery
>   > 
>   > --- In [email protected], "damien c. sadler" 
<necdet@> 
>   > wrote:
>   > >
>   > > hi guys,
>   > > 
>   > > could you look at this code and tell me what the problem is? 
i 
>   > keep getting an error telling me that there's no wend 
statement 
>   when 
>   > i know there is:
>   > > btw i'm using jamal mazrui's layout by code library to help 
>   with 
>   > gui placement.
>   > > 
>   > > 
>   > > func prompt()
>   > > _LBCCreate("choose activity:")
>   > > $mm=_LBCCtrlCreateRadio("Music Machine")
>   > > $wnit=_LBCCtrlCreateRadio("What Note Is This?")
>   > > $simon=_LBCCtrlCreateRadio("Simon")
>   > > $fkey=_LBCCtrlCreateRadio("fire key")
>   > > $mbi=_LBCCtrlCreateRadio("musical bop it")
>   > > $mbox=_LBCCtrlCreateRadio("music box")
>   > > $ok=_LBCCtrlCreateButton("&ok")
>   > > $ccl=_LBCCtrlCreateButton("e&xit")
>   > > _LBCShow()
>   > > while 1
>   > > $msg=guigetmsg()
>   > > if $msg=$ccl or $msg=$gui_event_close then exit
>   > > if $msg=$ok then read_choice()
>   > > wend
>   > > endfunc
>   > > func read_choice()
>   > > if guictrlread($mm)=$gui_checked then music_machine()
>   > > if guictrlread($wnit)=$gui_checked then what_note_is_this()
>   > > if guictrlread($simon)=$gui_checked then simon()
>   > > if guictrlread($fkey)=$gui_checked then firekey()
>   > > if guictrlread($mbi)=$gui_checked then musical_bop()
>   > > if guictrlread($mbox)=$gui_checked then music_box()
>   > > endfunc
>   > > 
>   > > 
>   > > 
>   > > thanks.
>   > > 
>   > > regards,
>   > > 
>   > > damien
>   > > 
>   > > 
>   > > 
>   > > [Non-text portions of this message have been removed]
>   > >
>   > 
>   > 
>   > 
>   > 
>   > 
>   > 
>   > [Non-text portions of this message have been removed]
>   >
> 
> 
> 
>    
> 
> 
> [Non-text portions of this message have been removed]
>