Re: Downloading OS image without using Download / Initialize GUI option of Platform Builder

Hi, Subrata,

It all depends on your bootloader (usually e-boot).  Bootloader acts as
TFTP server to receive the image.  So you need to set up an TFTP client
on a PC to transmit the image.  However, the TFTP does not start the
downloaded image as Platform Builder does.  This is fine for a flash
image since you need to power recycle the board to start.  For a RAM or
debug image, you need more work to get it going.

Although Windows comes with tftp client application, it doesn't work
with the port setting of Win CE.  So, you need a tftp client with
configurable port setting.  I don't have the detail in my hands.  But
the port number and the software can be found on the web.

Derek
Siconix Inc.
Design Done Right!
www.siconix.com
 --- subrata.kolay-/[email protected] wrote: 
> Hi All,
> 
> I am working on WindowsCE .Net 4.2 which is running on intel I830 M4
> chipset Intel motherboard. This is acting as my windows  CE device 
> while i am using a WinXP machine with Microsoft platform Builder 4.2
> to build the WinCE .Net 4.2 and deploy it on the above device. After
> building the OS image ( NK.bin). The image is downloaded  from host
> machine to target ( Using  Traget ->  Download / Initialize  GUI
> option of Platform Builder ). 
> 
> I want to download the image  from host to target from command line
> or any other option without using  Download / Initialize GUI option
of
> Platform Builder . 
> 
> Can anyone help me in this regards.
> 
> Thanks 
> Subrata Kolay
> Tata Consultancy Services Limited
> Mailto: subrata.kolay-/[email protected]
> Website: http://www.tcs.com

______________________________________________________________________ 
Post your free ad now! http://personals.yahoo.ca