Re: Same win service with different display names and description

From your description, I didn't think you'd need any way of specifying "use
this installer instead of that" - you just said you'd need to deploy it 4
times with different names, descriptions and interfaces.

If you need to install it 4 times, why would you want to run an installer 4
times instead of having 1 installer handle it all?

			Geoff

> -----Original Message-----
> From: Discussion of advanced .NET topics. [mailto:ADVANCED-
> [email protected]] On Behalf Of Eddie Lascu
> Sent: 24 November 2008 16:35
> To: [email protected]
> Subject: Re: [ADVANCED-DOTNET] Same win service with different display
> names and description
> 
> Geoff,
> 
> That's what Ryan has proposed, but how would you differentiate between
> the 4
> installers in the installutil command line? How do you specify "use
> this
> installer instead of that" in the command line. Ryan's refined approach
> was
> then to derive your own installation class and look for input
> parameters at
> installation time, thus allowing you to pass in the specific display
> name
> and the description.
> 
> Like you say, although WiX may be a fantastic tool, spending time to
> install
> it and then getting accustomed to it just for something that could be
> trivial may not be the road to take.
> 
> Regards,
> Eddie
> 
> 
> -----Original Message-----
> From: Discussion of advanced .NET topics.
> [mailto:[email protected]] On Behalf Of Geoff Taylor
> Sent: Monday, November 24, 2008 11:16 AM
> To: [email protected]
> Subject: Re: [ADVANCED-DOTNET] Same win service with different display
> names
> and description
> 
> That's good to know about WiX, but isn't WiX itself overkill for this?
> (I've never used it, but I've been on the receiving end of someone who
> did...)
> 
> Surely all you need to do is create 4 ServiceInstaller objects instead
> of 1
> in your installation project?  Each one has its own properties for
> name,
> service class etc., and you'd install it using InstallUtil the same way
> you're doing now.  And an uninstallation would automatically remove all
> 4
> services at the same time too.
> 
> It's been a while since I've had to do this though, so what am I
> missing?
> Has VS come out with a fancy draggy-droppy interface that hides the
> ServiceInstaller objects from you?
> 
> Cheers,
> 
> 			Geoff
> 
> > -----Original Message-----
> > From: Discussion of advanced .NET topics. [mailto:ADVANCED-
> > [email protected]] On Behalf Of Phil Sayers
> > Sent: 24 November 2008 16:10
> > To: [email protected]
> > Subject: Re: [ADVANCED-DOTNET] Same win service with different
> display
> > names and description
> >
> > I was apprehensive about Wix, but within 2 hours from being
> completely
> > green i had an MSI that did...
> >
> > create windows user account
> > install dll in COM+ with security
> > install vdir in IIS on a website with a specific host header and
> apply
> > security install webservices in said vdir and cleanly removed all of
> > them as part of the "uninstall".
> >
> > wix integrates with visual studio so you get some extra "project
> types"
> > to
> > play with.
> >
> >
> >
> > -----Original Message-----
> > From: Discussion of advanced .NET topics.
> > [mailto:[email protected]]On Behalf Of Eddie Lascu
> > Sent: Monday, November 24, 2008 10:46 AM
> > To: [email protected]
> > Subject: Re: [ADVANCED-DOTNET] Same win service with different
> display
> > names and description
> >
> >
> > Phil,
> >
> > Windows Services developed in .NET are installed with the installutil
> > tool.
> > All you need to do is go:
> >
> > C:\>installutil yourproject.exe
> >
> > What you propose may work, but it also means that I need to stray
> away
> > from the installutil tool and go into other tools that I don't know
> > much about.
> >
> > Will investigate the other "users" list.
> >
> > Thanks,
> > Eddie
> >
> >
> >
> >
> > -----Original Message-----
> > From: Discussion of advanced .NET topics.
> > [mailto:[email protected]] On Behalf Of Phil
> Sayers
> > Sent: Monday, November 24, 2008 10:30 AM
> > To: [email protected]
> > Subject: Re: [ADVANCED-DOTNET] Same win service with different
> display
> > names and description
> >
> > This sounds like a deployment problem.
> >
> > I'm 95% sure that something like the WiX toolset [1] or other MSI
> > builder would be able to help you here.
> > It all comes down to getting your component GUIDS correct in the
> > installer... and yes, you can specify service names/descriptions as
> > needed, or even prompt the user for them at install time... or
> specify
> > them by launching the msi from the commandline or a bootstrapper.
> >
> > There is also a "users" list for wix avaiilable through sourceforge.
> > The
> > devs of Wix are very active on the list.
> >
> > [1]http://wix.sf.net
> > (open source, but from MS.  tool to build installers)
> >
> >
> >
> > -----Original Message-----
> > From: Discussion of advanced .NET topics.
> > [mailto:[email protected]]On Behalf Of Eddie Lascu
> > Sent: Monday, November 24, 2008 10:17 AM
> > To: [email protected]
> > Subject: [ADVANCED-DOTNET] Same win service with different display
> > names and description
> >
> >
> > Hi there,
> >
> > I have one windows service that I need to deploy 4 times on a
> > production server. Each service will control a different interface.
> > The interfaces are 100% similar so that is why it made sense to
> > develop only one service.
> > Now,
> > that I need to deploy them, I also need to instantiate them with
> > different display names and descriptions. The display name and the
> > description are properties of the serviceInstaller object. Is there a
> > way to change those two properties other than changing them in my
> > development environment and then recompile the whole service? Is
> there
> > some kind of configuration file for the service itself where these
> > properties would be stored and then read by the service during the
> > installation phase?
> >
> > Thanks for your help,
> > Eddie
> >
> > ===================================
> > View archives and manage your subscription(s) at
> > http://peach.ease.lsoft.com/archives
> >
> > ===================================
> > View archives and manage your subscription(s) at
> > http://peach.ease.lsoft.com/archives
> >
> > ===================================
> > View archives and manage your subscription(s) at
> > http://peach.ease.lsoft.com/archives
> >
> > ===================================
> > View archives and manage your subscription(s) at
> > http://peach.ease.lsoft.com/archives
> 
> ===================================
> View archives and manage your subscription(s) at
> http://peach.ease.lsoft.com/archives
> 
> ===================================
> View archives and manage your subscription(s) at
> http://peach.ease.lsoft.com/archives

===================================
View archives and manage your subscription(s) at http://peach.ease.lsoft.com/archives