Re: Number of decimals

Hi Mike,

You could already see on $$retcode if it had an error (then $$retcode would be 10).
I already had some error flags added, added yours and added eval.errmode to use the mode you want.
I made the G4C behaviour $$retcode = 20 the default mode.
I hope you like it.

Regards,
Fred.


--- In [email protected], "floobydoo2000" <michael.bernas@...> wrote:
>
> I forgot to mention that I placed another copy of the eval.zip file in the Temp directory. In this case I named it eval1.1.001.zip.
> I have also now tested a syntax error on the dbl command and the result is "@" as I expected.
> 
> Thanks
> Mike
> 
> --- In [email protected], "floobydoo2000" <michael.bernas@> wrote:
> >
> > Hi Fred,
> > Thanks for the project file. I was able to recompile on my own without trouble.  I found that error messages were going to the output window okay.  The answer supplied when there was a syntax error was "0".  I thought that in these cases it would be better to give a response that was clearly not a legitimate answer to any calculation and change the response to "@" in the event of a syntax error.
> > 
> > This way, a script could be written to check for an error even in cases where 0 could have been a reasonable answer.
> > 
> > I should admit I didn't test this with the eval.dbl command.
> > 
> > Thanks
> > Mike
> > 
> > --- In [email protected], "fredfjord@" <fredfjord@> wrote:
> > >
> > > Hi Mike,
> > > 
> > > The functions are in math.h, i forgot to include them, i added this include and will upload the files.
> > > I knew there was a reason for putting it in the Temp folder :)
> > > You can ask what you want, if i know the answer i will give it or try to find out.
> > > I added the project file (eval.ppj) this start PellesC, with Ctrl+B you build the project and for debugging i enable the lg function (log in short but log is already used).
> > > For me it is also to learn so no time table needed :)
> > > 
> > > Regards,
> > > Fred.
> > > 
> > > 
> > > 
> > > --- In [email protected], "floobydoo2000" <michael.bernas@> wrote:
> > > >
> > > > I found that we all have G4C_API.h, but no hint of transendental functions or power functions. If you are tired of this Fred, I think I might have a go.  Although I did say that C compilers give me trouble I can usually manage if I have a start like you've given me as well as the actual compiler that was used to compile the original.
> > > > 
> > > > I'm kind of slow, so this will likely take me 2 or 3 weeks.  It's recreational after all and I'm in no hurry.
> > > > 
> > > > Any hints will be welcome.  
> > > > 
> > > > There is one other thing, I got results of -1, 288, and -65287 (-65 thousand and something, anyway) with no error message or crash as a result of the error.  A clue as to how to handle that will be very welcome.
> > > > 
> > > > Thanks
> > > > Mike
> > > > 
> > > > --- In [email protected], "floobydoo2000" <michael.bernas@> wrote:
> > > > >
> > > > > Thanks Fred,
> > > > > 
> > > > > I've tried it out and it works as expected, with a couple of (also expected) new app glitches.  Only the +,-,/, and* functions work.  This is enough for the code that Frans showed he was having trouble with.
> > > > > 
> > > > > I looked at the eval.c program and saw that functions like sin, cos, tan, ^, and ln were used, but could not figure out where they were defined.  I haven't got a copy of the G4C_API.h file.  Are there prototypes for these functions there?
> > > > > 
> > > > > Thanks
> > > > > Mike
> > > > > 
> > > > > --- In [email protected], "fredfjord@" <fredfjord@> wrote:
> > > > > >
> > > > > > Hi Frans, Mike,
> > > > > > 
> > > > > > I placed Eval.zip in the Temp folder.
> > > > > > I made it just to learn so it is not fully tested so i placed it in the Temp folder.
> > > > > > Perhaps you want to try it, this is how it can be used:
> > > > > > eval.dbl A5 ($A5*$A8/$B2)
> > > > > > B3=$A5
> > > > > > eval.setformat ".10f"
> > > > > > eval.str F (1-$C4+$B3)
> > > > > > say "Answer is $F"
> > > > > > 
> > > > > > The eval.dbl stores the result as a string in a hex format, not usable for people but no loss off precision for further calculations.
> > > > > > 
> > > > > > Regards,
> > > > > > Fred.
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/gui4cli/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/gui4cli/join
    (Yahoo! ID required)

<*> To change settings via email:
    [email protected] 
    [email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/