Re: Executable using Gui4Cli.dll

Thanks. I downloaded version - 19.37 and test.

To be able to compile using Gui4Cli.dll I had to disable Antivir latest version.

If not I get the warning "A virus or unwanted program TR/Crypt.XPACK.Gen was found in file Test.exe. Access to this file was denied." (Test.exe is my compiled program.)

However if I compile and run the dll version with Antivir disabled the original error has dissapeared. Only problrm now the virus warning and then Antivir "quarentines" or deletes the file.

If I compile using Gui4Cli.exe no warnings and program is working fine.

Regards.

Frans.


--- In [email protected], Dimitris Keletsekis <gui4cli@...> wrote:
>
> Ok, I uploaded a new version - 19.37 - which should solve this problem.
> 
> I was going to upload a new full version, with an updated installer, etc,
> but its taking longer than I thought, so here are the executables for now...
> 
> Best regards,
> Dimitris
> 
> 
> 
> On Sun, Jul 1, 2012 at 2:40 AM, Marianne <marianne976@...> wrote:
> 
> > **
> >
> >
> > Dimitris
> >
> > I downloaded Test.exe and run it.
> >
> > The program is running but when I click the Exit button I still get the
> > error "Test.exe has stopped working. Windows can check online for a
> > solution to the problem."
> >
> > It also ask me if I want to debug the program but I do not have any
> > knowledge of this. I just click on debug to see what happens and then I got
> > a message of "Unhandled exception in Test.exe 0xC0000005. Acces violation"
> >
> > If it is running without problems on your computer it must be a setting on
> > my computer. However I get the same message on all computers that I use.
> >
> > Thanks.
> >
> > Frans
> >
> >
> >
> > --- In [email protected], "Marianne" <marianne976@> wrote:
> > >
> > > Dimitris
> > >
> > > The link given below does not work. I get the message "File not found"
> > >
> > > The exe I am talking about works ok, the problem is that when I Quit the
> > program I get the error message. So it just on quit, further I do not have
> > problems.(The error occurs a second or so after the Quit (Exit) command.)
> > >
> > > Kind regards.
> > >
> > > Frans.
> > >
> > >
> > > --- In [email protected], Dimitris Keletsekis <gui4cli@> wrote:
> > > >
> > > > Hi,
> > > >
> > > > I made the executable, but it works ok.. It takes a bit of time to exit
> > > > (maybe more than it should?), but it does exit. Here's the link
> > (test.exe
> > > > in Files/Temp)
> > > >
> > > >
> > http://f1.grp.yahoofs.com/v1/EJnoTxhV08ihJCPErYYbcTpbVhoGmLc1U4YpXVzxiGJb3x5bijjU5Q6g3cTDMBcfXAfMtc-Hs42ILdlE/Temp/test.exe
> > > >
> > > > Try this and tell me..
> > > > Dimitris
> > > >
> > > >
> > > >
> > > > On Thu, Jun 21, 2012 at 5:09 PM, Marianne <marianne976@> wrote:
> > > >
> > > > > **
> > > > >
> > > > >
> > > > > Demitris
> > > > >
> > > > > I made a test.gui as below:
> > > > >
> > > > > G4C TEST
> > > > > WINDOW 50 30 300 200 "TEST gui"
> > > > > WinAttr style resize
> > > > >
> > > > > xOnLoad
> > > > > GuiOpen #this
> > > > >
> > > > > xOnClose
> > > > > GuiQuit #this
> > > > > Quit
> > > > >
> > > > > XBUTTON 190 150 90 35 "Exit"
> > > > > Guiquit #this
> > > > >
> > > > > Create a Normal Gui4Cli executable and run. Click the Exit button. No
> > > > > problem, works 100%. No bacground instances.
> > > > >
> > > > > Now create Gui4Cli executable using Gui4cli dll option and run. No
> > > > > problem. Click the Exit button and I get the error "Test.exe has
> > stopped
> > > > > working."
> > > > >
> > > > > Remove Quit from xOnclose and again create a exe using the dll. Run
> > the
> > > > > program and exit. No problem everything works fine.
> > > > >
> > > > > The only problem now is that if you use Ctrl Alt delete that
> > processes wil
> > > > > still indicate that test.exe is still running in background, it does
> > not
> > > > > quit. Everytime you run Test.exe another instance is added. This
> > creates a
> > > > > problem if one put the exe on a server.
> > > > >
> > > > > If you use Set 0Gui instead, although you say it does nothing, using
> > Exit
> > > > > gives the same error, any way on all the computers I am using.
> > > > >
> > > > > I have three computers using Windows XP, one using Windows 7 and the
> > work
> > > > > computer also on Windows XP and I get the same error on all of them.
> > (All
> > > > > Service Pack 2)
> > > > >
> > > > > Hope it is clear.
> > > > >
> > > > > I probably do somethimg that is not correct.
> > > > >
> > > > > Thanks.
> > > > >
> > > > > Frans
> > > > >
> > > > >
> > > > > --- In [email protected], Dimitris Keletsekis <gui4cli@>
> > wrote:
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > What executable are you using - the one included ?
> > > > > >
> > > > > > Off hand, I don't know what can be causing it. I have to run it in
> > debug
> > > > > > mode and see if I can find anything. The problem is all the
> > setting up
> > > > > > needed to reach that stage... :(
> > > > > >
> > > > > > The SET 0GUI command does nothing - or does it still crash?
> > > > > >
> > > > > > Dimitris
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Wed, Jun 20, 2012 at 5:43 PM, Marianne <marianne976@> wrote:
> > > > > >
> > > > > > > **
> > > > >
> > > > > > >
> > > > > > >
> > > > > > > Demitris
> > > > > > >
> > > > > > > I encountered one problem with the above mentioned and I will
> > > > > appreciate
> > > > > > > some advice.
> > > > > > >
> > > > > > > If one compiles a script using the Normal or dll option one has
> > to use
> > > > > the
> > > > > > > Quit command. If not then everytime you close the exe it is still
> > > > > running
> > > > > > > in the background. This I can see when I use Ctrl Alt Del.
> > > > > > >
> > > > > > > If I add the Quit command to a Normal executable everything
> > works fine.
> > > > > > > However if I add the Quit command to an executable using the dll
> > I got
> > > > > a
> > > > > > > Gui4Cli error when quitting. I also tried to use the Set 0Gui
> > command
> > > > > with
> > > > > > > no succes.
> > > > > > >
> > > > > > > The message is xx.exe has stop working.
> > > > > > >
> > > > > > > This is happening on Windows XP and Windows 7.
> > > > > > >
> > > > > > > Kind regards.
> > > > > > >
> > > > > > > Frans
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
> >  
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/gui4cli/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/gui4cli/join
    (Yahoo! ID required)

<*> To change settings via email:
    [email protected] 
    [email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/