Re: Executable using Gui4Cli.dll

Dimitris

Sorry it is me again. I think I know what is going on. 

It is an issue of the latest Avira Antivir Free program. I used the link you gave for testing and it is only Antivir that is indicating a virus. So as they called it is a false positive detection (the compiled program Test.exe).

I will upload the program to Avira Antivir for their attention.

Kind regards.

Frans


--- In [email protected], "Marianne" <marianne976@...> wrote:
>
> Dimitris
> 
> Just to clear up some misunderstanding. Pack_dll.exe is virus free. The problem is when I compile then I get the message that the compiled file has a virus. This only happens when compiling an exe using Gli4Cli.dll
> 
> Regards
> 
> Frans
> 
> --- In [email protected], "Marianne" <marianne976@> wrote:
> >
> > Dimitris
> > 
> > Thanks for the reply. I tested the Pack_dll.exe on two different systems:
> > 
> > First system
> > Windows XP SP2
> > Internet Explorer 8
> > Pack_dll.exe modified on 04/07/2012
> > Avira Antivir latest edition (I update once a week).
> > I comipled with no problems. Working fine
> > 
> > Second system
> > Windows 7 Home Premium (64 bit)
> > Internet Explorer 9
> > Pack_dll.exe modified on 04/07/2012
> > Avira Antivir latest edition (I update once a week).
> > 
> > Cannot compile as I get a virus alert. It compiles but access denied.
> > 
> > Is it possible that it can be Internet explorer as I use two different versions on the two systems?
> > 
> > Hope this will give you more information. I will test again and let you know if I had made a mistake.
> > 
> > Kind regards.
> > 
> > Frans
> > ==========================
> > --- In [email protected], Dimitris Keletsekis <gui4cli@> wrote:
> > >
> > > Hi,
> > > 
> > > I just checked again the PackExe_dll.exe file that I uploaded and it
> > > doesn't get flagged as a virus by any antivirus software. You can check
> > > yourself at this site:
> > > 
> > > www.virustotal.com
> > > 
> > > Can you tell me which antivirus you are using?
> > > 
> > > Maybe you are getting the 2 files mixed up. The old version did get flagged
> > > as a virus (mistakenly) the new one doesn't. Its weird that in your system
> > > its the exact opposite.. Also try renaming the file - maybe it's been
> > > blacklisted by name (unlikely, but..)
> > > 
> > > Dimitris
> > > 
> > > 
> > > 
> > > On Mon, Jul 9, 2012 at 1:41 PM, Marianne <marianne976@> wrote:
> > > 
> > > > **
> > > >
> > > >
> > > > Dimitris
> > > >
> > > > Thanks. Enjoy your time away, does not matter if it is work or not.
> > > >
> > > >
> > > > Frans
> > > >
> > > > --- In [email protected], Dimitris Keletsekis <gui4cli@> wrote:
> > > > >
> > > > > That's strange... I changed PackExe_dll.exe so that it wouldn't cause
> > > > this
> > > > > and checked with every antivirus to see that it didn't (there are sites
> > > > > that do this)
> > > > >
> > > > > The reason it was sometimes marked as a virus was that I had code in it
> > > > to
> > > > > automatically download gui4cli.dll from the web if not found, and some
> > > > > antiviruses look for those download functions and automatically mark the
> > > > > program as a Trojan downloader.
> > > > >
> > > > > Anyway, now I'm away. I'll have a look when I get back.
> > > > >
> > > > > Dimitris
> > > > >
> > > > >
> > > > > On Sunday, July 8, 2012, Marianne wrote:
> > > > >
> > > > > > **
> > > >
> > > > > >
> > > > > >
> > > > > > Dimitris
> > > > > >
> > > > > > Sorry, it is me again.
> > > > > >
> > > > > > I did a little testing. It seems to me that PackExe_dll.exe is the
> > > > progam
> > > > > > causing the virus warning.
> > > > > >
> > > > > > If I use the dll of version 19.37 and an old PackExe_dll.exe (version
> > > > > > 19.35) then there is no virus warning but then the original problem is
> > > > back.
> > > > > >
> > > > > > I just thought that it can be of help to you.
> > > > > >
> > > > > > Kind regards.
> > > > > >
> > > > > > Frans
> > > > > >
> > > > > > --- In [email protected] <javascript:_e({}, 'cvml',
> > > >
> > > > > > 'gui4cli%40yahoogroups.com');>, Dimitris Keletsekis <gui4cli@> wrote:
> > > > > > >
> > > > > > > Ok, I uploaded a new version - 19.37 - which should solve this
> > > > problem.
> > > > > > >
> > > > > > > I was going to upload a new full version, with an updated installer,
> > > > etc,
> > > > > > > but its taking longer than I thought, so here are the executables for
> > > > > > now...
> > > > > > >
> > > > > > > Best regards,
> > > > > > > Dimitris
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On Sun, Jul 1, 2012 at 2:40 AM, Marianne <marianne976@> wrote:
> > > > > > >
> > > > > > > > **
> > > > > > > >
> > > > > > > >
> > > > > > > > Dimitris
> > > > > > > >
> > > > > > > > I downloaded Test.exe and run it.
> > > > > > > >
> > > > > > > > The program is running but when I click the Exit button I still
> > > > get the
> > > > > > > > error "Test.exe has stopped working. Windows can check online for a
> > > > > > > > solution to the problem."
> > > > > > > >
> > > > > > > > It also ask me if I want to debug the program but I do not have any
> > > > > > > > knowledge of this. I just click on debug to see what happens and
> > > > then
> > > > > > I got
> > > > > > > > a message of "Unhandled exception in Test.exe 0xC0000005. Acces
> > > > > > violation"
> > > > > > > >
> > > > > > > > If it is running without problems on your computer it must be a
> > > > > > setting on
> > > > > > > > my computer. However I get the same message on all computers that I
> > > > > > use.
> > > > > > > >
> > > > > > > > Thanks.
> > > > > > > >
> > > > > > > > Frans
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --- In [email protected], "Marianne" <marianne976@> wrote:
> > > > > > > > >
> > > > > > > > > Dimitris
> > > > > > > > >
> > > > > > > > > The link given below does not work. I get the message "File not
> > > > > > found"
> > > > > > > > >
> > > > > > > > > The exe I am talking about works ok, the problem is that when I
> > > > Quit
> > > > > > the
> > > > > > > > program I get the error message. So it just on quit, further I do
> > > > not
> > > > > > have
> > > > > > > > problems.(The error occurs a second or so after the Quit (Exit)
> > > > > > command.)
> > > > > > > > >
> > > > > > > > > Kind regards.
> > > > > > > > >
> > > > > > > > > Frans.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --- In [email protected], Dimitris Keletsekis <gui4cli@>
> > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > Hi,
> > > > > > > > > >
> > > > > > > > > > I made the executable, but it works ok.. It takes a bit of
> > > > time to
> > > > > > exit
> > > > > > > > > > (maybe more than it should?), but it does exit. Here's the link
> > > > > > > > (test.exe
> > > > > > > > > > in Files/Temp)
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > >
> > > > > >
> > > > http://f1.grp.yahoofs.com/v1/EJnoTxhV08ihJCPErYYbcTpbVhoGmLc1U4YpXVzxiGJb3x5bijjU5Q6g3cTDMBcfXAfMtc-Hs42ILdlE/Temp/test.exe
> > > > > > > > > >
> > > > > > > > > > Try this and tell me..
> > > > > > > > > > Dimitris
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > On Thu, Jun 21, 2012 at 5:09 PM, Marianne <marianne976@>
> > > > wrote:
> > > > > > > > > >
> > > > > > > > > > > **
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Demitris
> > > > > > > > > > >
> > > > > > > > > > > I made a test.gui as below:
> > > > > > > > > > >
> > > > > > > > > > > G4C TEST
> > > > > > > > > > > WINDOW 50 30 300 200 "TEST gui"
> > > > > > > > > > > WinAttr style resize
> > > > > > > > > > >
> > > > > > > > > > > xOnLoad
> > > > > > > > > > > GuiOpen #this
> > > > > > > > > > >
> > > > > > > > > > > xOnClose
> > > > > > > > > > > GuiQuit #this
> > > > > > > > > > > Quit
> > > > > > > > > > >
> > > > > > > > > > > XBUTTON 190 150 90 35 "Exit"
> > > > > > > > > > > Guiquit #this
> > > > > > > > > > >
> > > > > > > > > > > Create a Normal Gui4Cli executable and run. Click the Exit
> > > > > > button. No
> > > > > > > > > > > problem, works 100%. No bacground instances.
> > > > > > > > > > >
> > > > > > > > > > > Now create Gui4Cli executable using Gui4cli dll option and
> > > > run.
> > > > > > No
> > > > > > > > > > > problem. Click the Exit button and I get the error "Test.exe
> > > > has
> > > > > > > > stopped
> > > > > > > > > > > working."
> > > > > > > > > > >
> > > > > > > > > > > Remove Quit from xOnclose and again create a exe using the
> > > > dll.
> > > > > > Run
> > > > > > > > the
> > > > > > > > > > > program and exit. No problem everything works fine.
> > > > > > > > > > >
> > > > > > > > > > > The only problem now is that if you use Ctrl Alt delete that
> > > > > > > > processes wil
> > > > > > > > > > > still indicate that test.exe is still running in background,
> > > > it
> > > > > > does
> > > > > > > > not
> > > > > > > > > > > quit. Everytime you run Test.exe another instance is added.
> > > > This
> > > > > > > > creates a
> > > > > > > > > > > problem if one put the exe on a server.
> > > > > > > > > > >
> > > > > > > > > > > If you use Set 0Gui instead, although you say it does
> > > > nothing,
> > > > > > using
> > > > > > > > Exit
> > > > > > > > > > > gives the same error, any way on all the computers I am
> > > > using.
> > > > > > > > > > >
> > > > > > > > > > > I have three computers using Windows XP, one using Windows 7
> > > > and
> > > > > > the
> > > > > > > > work
> > > > > > > > > > > computer also on Windows XP and I get the same error on all
> > > > of
> > > > > > them.
> > > > > > > > (All
> > > > > > > > > > > Service Pack 2)
> > > > > > > > > > >
> > > > > > > > > > > Hope it is clear.
> > > > > > > > > > >
> > > > > > > > > > > I probably do somethimg that is not correct.
> > > > > > > > > > >
> > > > > > > > > > > Thanks.
> > > > > > > > > > >
> > > > > > > > > > > Frans
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > --- In [email protected], Dimitris Keletsekis
> > > > <gui4cli@>
> > > > > > > > wrote:
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >  
> > > >
> > >
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/gui4cli/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/gui4cli/join
    (Yahoo! ID required)

<*> To change settings via email:
    [email protected] 
    [email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/