4.4.99.901: s3 fails some of xtests

Németh Márton <[email protected]>
Newsgroups gmane.comp.xfree86.devel
Message-ID <[email protected]> 
Hi!

I've downloaded XFree86 4.4.99.901 from 
ftp://ftp.xfree86.org/pub/XFree86/snapshots/4.4.99.901/binaries/Linux-ix86-glibc23/ 
and run xtest 4.0.8 against it.

There was some tests which failed:

XCopyArea
XDrawArc
XDrawArcs
XSetFontPath

I don't know how to see exactly what went wrong and what would be the 
expected result.

Where to start debugging these failures?

Thanks.

	NMarci
XF86Config (text/plain, 2.1 KB) 
Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
	FontPath	"/usr/X11R6/lib/X11/fonts/xtest/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "xtrap"
	Load  "speedo"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "pc104"
	Option	    "XkbLayout" "hu"
EndSection

Section "InputDevice"

	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "Microsoft"
	Option	    "Device" "/dev/mouse"
	Option	    "AllowMouseOpenFail"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
	HorizSync    31.5 - 57.0
	VertRefresh  50.0 - 80.0
EndSection

Section "Device"

	Identifier  "Card0"
	Driver      "s3"
	VendorName  "S3 Inc."
	BoardName   "86c764/765 [Trio32/64/64V+]"
	BusID       "PCI:0:09:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth   16
	SubSection "Display"
		Depth     1
	EndSubSection
	SubSection "Display"

		Depth     4
		Modes    "1024x768" "896x672" "800x600" "640x480"
	EndSubSection
	SubSection "Display"

		Modes    "1024x768" "896x672" "800x600" "640x480"
		Depth     8
	EndSubSection
	SubSection "Display"

		Depth     15
		Modes    "1024x768" "896x672" "832x624" "800x600" "640x480"
	EndSubSection
	SubSection "Display"

		Depth     16
		Modes    "1024x768" "896x672" "832x624" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1024x768" "896x672" "832x624" "800x600" "640x480"
	EndSubSection
EndSection
XFree86.0.log (text/plain, 24.8 KB) 
This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to [email protected] and patches submitted
to [email protected].  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).

XFree86 Version 4.4.99.901 (4.5.0 RC 1)
Release Date:  8 February 2005
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.4.24 i686 [ELF] 
Current Operating System: Linux madar 2.6.10 #3 Sat Feb 19 12:43:08 CET 2005 i586
Build Date: 08 February 2005
Changelog Date: 08 February 2005
	Before reporting problems, check http://www.XFree86.Org/
	to make sure that you have the latest version.
Module Loader present
Command line: XFree86 -ac -s 0 -kb
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (EE) error, (WW) warning,
	(II) informational, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Feb 19 16:14:43 2005
(==) Using config file: "/etc/X11/XF86Config".
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.3
	XFree86 Video Driver: 0.8
	XFree86 XInput driver : 0.5
	XFree86 Server Extension : 0.3
	XFree86 Font Renderer : 0.5
(II) Loader running on linux
(++) XKB: disabled.
(==) Keyboard: CustomKeycode disabled.
(==) ServerLayout "XFree86 Configured"
(==) |-->Screen "Screen0" (0) (0, 0)
(**) |  |-->Device "Card0"
(**) |  |-->Monitor "Monitor0" (0)
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/X11R6/lib/X11/fonts/Speedo/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
	Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/xtest/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(II) Checking for unused ServerFlags options:
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Bitmap
(--) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000058, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7100 card 0000,0000 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 01 class 06,80,00 hdr 00
(II) PCI: 00:09:0: chip 5333,8811 card 0000,0000 rev 54 class 03,00,00 hdr 00
(II) PCI: 00:0a:0: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00 hdr 80
(II) PCI: 00:0a:1: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00 hdr 80
(II) PCI: 00:0a:2: chip 1106,3104 card 0925,1234 rev 51 class 0c,03,20 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:9:0) S3 Inc. 86c764/765 [Trio32/64/64V+] rev 84, Mem @ 0xe0000000/26
(II) Open APM successful
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xe4000000 - 0xe40000ff (0x100) MX[B]E
	[1] -1	0	0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
	[2] -1	0	0x00006600 - 0x0000661f (0x20) IX[B]E
	[3] -1	0	0x00006500 - 0x0000651f (0x20) IX[B]E
	[4] -1	0	0x00006400 - 0x0000641f (0x20) IX[B]E
	[5] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]E
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xe4000000 - 0xe40000ff (0x100) MX[B]E
	[1] -1	0	0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
	[2] -1	0	0x00006600 - 0x0000661f (0x20) IX[B]E
	[3] -1	0	0x00006500 - 0x0000651f (0x20) IX[B]E
	[4] -1	0	0x00006400 - 0x0000641f (0x20) IX[B]E
	[5] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xe4000000 - 0xe40000ff (0x100) MX[B]E
	[6] -1	0	0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[9] -1	0	0x00006600 - 0x0000661f (0x20) IX[B]E
	[10] -1	0	0x00006500 - 0x0000651f (0x20) IX[B]E
	[11] -1	0	0x00006400 - 0x0000641f (0x20) IX[B]E
	[12] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]E
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.13.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "s3"
(II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o
(II) Module s3: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 0.3.5
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.5
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
	Trio32/64, Aurora64V+, Trio64UV+, Trio64V2/DX/GX
(II) Primary Device is: PCI 00:09:0
(--) Chipset Trio32/64 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xe4000000 - 0xe40000ff (0x100) MX[B]E
	[6] -1	0	0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[9] -1	0	0x00006600 - 0x0000661f (0x20) IX[B]E
	[10] -1	0	0x00006500 - 0x0000651f (0x20) IX[B]E
	[11] -1	0	0x00006400 - 0x0000641f (0x20) IX[B]E
	[12] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]E
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xe4000000 - 0xe40000ff (0x100) MX[B]E
	[6] -1	0	0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
	[7] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[8] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[9] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[10] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0	0x00006600 - 0x0000661f (0x20) IX[B]E
	[13] -1	0	0x00006500 - 0x0000651f (0x20) IX[B]E
	[14] -1	0	0x00006400 - 0x0000641f (0x20) IX[B]E
	[15] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]E
	[16] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[17] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.8
(II) s3(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) s3(0): Depth 16, (--) framebuffer bpp 16
(==) s3(0): RGB weight 565
(==) s3(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.8
(II) s3(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.8
(II) s3(0): VESA BIOS detected
(II) s3(0): VESA VBE Version 1.2
(II) s3(0): VESA VBE Total Mem: 1024 kB
(II) s3(0): VESA VBE OEM: S3 Incorporated. Trio64V+
(==) s3(0): Using gamma correction (1.0, 1.0, 1.0)
(**) s3(0): Chipset: "Trio32/64"
(--) s3(0): Framebuffer @ 0xe0000000
(--) s3(0): videoRam = 1024 Kb
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.8
(--) s3(0): MCLK 59.957 Mhz
(--) s3(0): RefClock: 16000
(--) s3(0): Max pixel clock at this depth is 80 Mhz
(II) s3(0): Monitor0: Using hsync range of 31.50-57.00 kHz
(II) s3(0): Monitor0: Using vrefresh range of 50.00-80.00 Hz
(II) s3(0): Clock range:  15.60 to  80.00 MHz
(II) s3(0): Not using default mode "640x350" (vrefresh out of range)
(II) s3(0): Not using default mode "320x175" (vrefresh out of range)
(II) s3(0): Not using default mode "640x400" (vrefresh out of range)
(II) s3(0): Not using default mode "320x200" (vrefresh out of range)
(II) s3(0): Not using default mode "720x400" (vrefresh out of range)
(II) s3(0): Not using default mode "360x200" (vrefresh out of range)
(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "640x480" (vrefresh out of range)
(II) s3(0): Not using default mode "320x240" (vrefresh out of range)
(II) s3(0): Not using default mode "800x600" (vrefresh out of range)
(II) s3(0): Not using default mode "400x300" (vrefresh out of range)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (vrefresh out of range)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (hsync out of range)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (hsync out of range)
(II) s3(0): Not using default mode "1152x864" (insufficient memory for mode)
(II) s3(0): Not using default mode "576x432" (hsync out of range)
(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x480" (hsync out of range)
(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x480" (hsync out of range)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x512" (hsync out of range)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x512" (hsync out of range)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x512" (hsync out of range)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) s3(0): Not using default mode "896x672" (insufficient memory for mode)
(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) s3(0): Not using default mode "896x672" (insufficient memory for mode)
(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) s3(0): Not using default mode "928x696" (insufficient memory for mode)
(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) s3(0): Not using default mode "928x696" (insufficient memory for mode)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(0): Not using default mode "1152x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) s3(0): Not using default mode "700x525" (hsync out of range)
(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) s3(0): Not using default mode "700x525" (hsync out of range)
(II) s3(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x512" (hsync out of range)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using mode "1024x768" (no mode of this name)
(II) s3(0): Not using mode "896x672" (no mode of this name)
(II) s3(0): Not using default mode "832x624" (insufficient memory given virtual size)
(--) s3(0): Virtual size is 800x600 (pitch 800)
(**) s3(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) s3(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) s3(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) s3(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) s3(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) s3(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) s3(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) s3(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) s3(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) s3(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) s3(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) s3(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) s3(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) s3(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) s3(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) s3(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) s3(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) s3(0): Modeline "512x384"   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync
(**) s3(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) s3(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) s3(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) s3(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) s3(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) s3(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) s3(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) s3(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) s3(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) s3(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) s3(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) s3(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) s3(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) s3(0): Modeline "320x240"   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
(**) s3(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) s3(0): Modeline "320x240"   15.75  320 332 352 416  240 244 245 260 doublescan -hsync -vsync
(==) s3(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.4.99.901, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.8
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xe0000000 - 0xe3ffffff (0x4000000) MS[B]
	[1] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0xe4000000 - 0xe40000ff (0x100) MX[B]E
	[7] -1	0	0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
	[8] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[9] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[10] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[11] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[12] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[13] -1	0	0x00006600 - 0x0000661f (0x20) IX[B]E
	[14] -1	0	0x00006500 - 0x0000651f (0x20) IX[B]E
	[15] -1	0	0x00006400 - 0x0000641f (0x20) IX[B]E
	[16] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]E
	[17] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[18] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(==) s3(0): Backing store disabled
(II) s3(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 color pattern filled rectangles
	Solid Lines
(II) s3(0): Acceleration enabled
(II) s3(0): Using PIO
(II) s3(0): Using SW cursor
(==) s3(0): DPMS disabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "Microsoft"
(**) Mouse0: Device: "/dev/mouse"
(**) Mouse0: Protocol: "Microsoft"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "BaudRate" "1200"
(**) Option "StopBits" "1"
(**) Option "DataBits" "7"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "0"
(**) Option "FlowControl" "None"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse0: Buttons: 3
(**) Mouse0: BaudRate: 1200
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!
(II) Open APM successful
(II) APM registered successfully
(II) s3(0): Acceleration enabled
(II) s3(0): Using PIO
(II) s3(0): Using SW cursor
(==) s3(0): DPMS disabled
(==) RandR enabled
out.4985 (text/plain, 119.8 KB) - not displayed
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.