Re: 4.4.99.903: s3: missing some of the screen

Marc Aurele La France írta:
> On Fri, 11 Mar 2005, [ISO-8859-2] Németh Márton wrote:
> 
>> Starting XFree86 4.4.99.903 using the s3 driver at mode 1024x768 8bpp 
>> I see the following screen:
> 
> 
>>      0     303                   1023
>>      |      |                      |
>> 0 ---BBBBBBBB----------------------+
>>      BBBBBBBB                      |
>>      BBBBBBBB                      |
>>      BBBBBBBB       GOOD AREA      |
>>      BBBBBBBB                      |
>>      BBBBBBBB                      |
>> 767--BBBBBBBB----------------------+
> 
> 
>> where B means that black pixels are displayed always.
> 
> 
>> I don't know what is the problem exactly but the attached patch 
>> removes this bug. (May cause new ones, too...)
> 
> 
>> chip:
>> -----
>> S3 Trio64V+
>>   P1E3BF
>> 86C765
>> 9650 MB851
>> TAIWAN
> 
> 
>> VGA BIOS:
>> ---------
>> Phoenix S3 TRIO64V+ Enhanced VGA BIOS. Version 1.02-02
>> Copyright 1987-1992 Phoenix Technologies Ltd.
>> Copyright 1992-1995 S3 Incorporated.
>> All Rights Reserved
> 
> 
>> lspci -v:
>> ---------
>> 0000:00:09.0 VGA compatible controller: S3 Inc. 86c764/765 
>> [Trio32/64/64V+] (rev 54) (prog-if 00 [VGA])
>>        Flags: medium devsel, IRQ 10
>>        Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
> 
> 
> Could you try the attached instead?  This one also fixes a few other 
> problems I noticed.

The problem is solved if I use the patch.

Running the xtest 4.0.11 the following tests are failed using 
4.4.99.903+patched s3 driver, using 1024x768 8bpp:

XListPixmapFormats
XDrawArc
XDrawArcs
XSetFontPath
XAllocNamedColor
XLookupColor
XStringToKeysym

	NMarci