Re: 4.5.99.902 Problem with i810 EDID not honoured for 1360x768@60

On Tue, 2006-03-28 at 18:37 +0100, Barry Scott wrote:
> I'm testing the i945G driving a Hitachi panel that has a preferred mode 
> of 1360x768@60Hz.
> RC2 sets the refresh to 75Hz that is not allowed by the EDID. Attached 
> is the config created
> by X -configure and the X log at logverbose 8. I use 915resolution to 
> set a slot tp 1360x768:
> 
> 915resolution 58 1360 768
> 
> xrandr reports:
> 
>  SZ:    Pixels          Physical       Refresh
> *0   1360 x 768    ( 720mm x 406mm )  *75
>  1   1024 x 768    ( 720mm x 406mm )   75
>  2    800 x 600    ( 720mm x 406mm )   75
>  3    640 x 480    ( 720mm x 406mm )   75
> Current rotation - normal
> Current reflection - none
> Rotations possible - normal
> Reflections possible - none
> 
> The panel reports 1024x768 75Hz
> 
> Why isn't 60Hz being used? Is the any of the timing info from the EDID 
> being used?

Quite possibly. What does the log say ?

Alan.