PATCH: Added amd64 support for aperture driver (plus cosmetics to make aperture building on sun4v)
"Martin Bochnig" <[email protected]>
| Newsgroups | gmane.comp.xfree86.devel |
|---|---|
| Message-ID | <[email protected]> |
<<apSolaris.shar>>
<<apSolaris.shar__amd64_sun4v.diff>>
#######################################################################
#######################################################################
##
## I have uploaded two files to
## http://fiesta.cs.tu-berlin.de/~mbeinsx/aperture_amd64_sun4v/
##
#######################################################################
#######################################################################
... it was summer solstice on June 20/21 (UTC Date).
And therefore also half-time between two "Happy Holidays"
seasons, Tempus Fugit!
So Cristmas is six short long months away - in whatever direction
we look. This will, however, not hinder me from releasing
my _few_ added bits to the public, which make XFree86's / Xorg's
aperture driver work on amd64 64 bit (Open)Solaris kernels, where
the un-open /dev/xsvc driver can not be distributed legally, and
where the lack of a working amd64-aperture module has been kind of
a show-stopper for over a year.
So I'm indeed publishing those changes, before I actually have out
marTux for x86/x64 (which I publically announce hereby) and because
of that give Belenix, Nextenda and Schillix the chance to be out
with a release featuring X11 in amd64 mode, before myself's marTux is.
So go, hurry! :-)
You may notice, that interestingly both XFree86 and Xorg still have
100% exactly the same apSolaris.shar inside their current CVS, last
modified in 2002 (though the webcvs entries and even revisions
look different at first):
http://cvsweb.xfree86.org/cvsweb/xc/programs/Xserver/hw/xfree86/etc/apSolaris.shar
http://webcvs.freedesktop.org/xorg/xserver/xorg/hw/xfree86/os-support/solaris/apSolaris.shar?view=log
--->>
-rw-r--r-- 1 bochnig bochnig 16546 Jun 26 00:30 XF86_apSolaris.shar
-rw-r--r-- 1 bochnig bochnig 16546 Jun 26 00:29 Xorg_apSolaris.shar
bash-3.1$ diff -cu XF86_apSolaris.shar Xorg_apSolaris.shar
No differences encountered
Both projects can (or could?) therefore use the same attached diff,
if they decide to incorporate something.
I also chose a new detection mechanism for ISA-dependent
selection of Makefiles: I use "isainfo -k" instead of "uname -m".
The reasons for this are:
#0.) You cannot determine with uname (on Solaris), whether or not
we are running on a plain x86, or on amd64. Especially
can't we determine, wich kernel we're running.
"uname -m" would always and only give i86pc on amd64.
#1.) sun4u is by no means the only implementation of sparcv9 anymore:
Take into account SUNW's throughput computing (sun4v) or - not
to forget - the vendor FJSV, that may become much more wide-
spread in the future, when SUNW/FJSV's APL will be out.
The ISA is important to us, rather then the machine platform.
To summarize this: Integrated support for generic sparcv9 - and therefore also
sun4v aka Niagara servers, later APL, Rock, Rock2 etc. in the mid term future.
All that by means of a rather cosmetical change.
--->> Go OpenSolaris, go! --->> :)
--
Martin Bochnig
[email protected]
www: martux.org / martux.net / martux.com
(starting ASAP over the week)
apSolaris.shar
(application/octet-stream, 16.6 KB) - not displayed
apSolaris.shar__amd64_sun4v.diff
(text/x-patch, 15 KB)
--- /apSolaris.shar Sat Jun 24 12:07:46 2006 +++ apSolaris.shar Sun Jun 25 20:59:11 2006 @@ -1,40 +1,30 @@ #!/bin/sh -# $XFree86$ -# This is a shell archive (produced by GNU sharutils 4.2c). -# To extract the files from this archive, save it to some FILE, remove -# everything before the `!/bin/sh' line above, then type `sh FILE'. +# for $XFree86$ +# and $Xorg$ # -# Made on 2002-10-04 13:41 MDT by <root@abcyxhiz>. -# Source directory was `/archives'. +# This is a shell archive. Save it in a file, remove anything before +# this line, and then unpack it by entering "sh file". Note, it may +# create directories; files and directories will be owned by you and +# have default permissions. +# Made on Sun Jun 25 20:24:59 CEST 2006 by Martin Bochnig at martux.org # -# Existing files will *not* be overwritten unless `-c' is specified. -# This format requires very little intelligence at unshar time. -# "if test", "echo", "mkdir", and "sed" may be needed. +# This archive contains: # -# This shar contains: -# length mode name -# ------ ---------- ------------------------------------------ -# 1521 -rw-r--r-- aperture/Makefile -# 1659 -rw-r--r-- aperture/README -# 7557 -rw-r--r-- aperture/aperture.c -# 450 -rw-r--r-- aperture/aperture.conf -# 87 -rw-r--r-- aperture/devlink.tab -# 1062 -rw-r--r-- aperture/Makefile.sun4u +# ./aperture +# +# ./aperture/Makefile +# ./aperture/Makefile.amd64 +# ./aperture/Makefile.sparcv9 +# ./aperture/README +# ./aperture/aperture.c +# ./aperture/aperture.conf +# ./aperture/devlink.tab # -echo=echo -shar_tty= shar_n= shar_c=' -' -mkdir _sh09806 || ( echo 'failed to create locking directory' '_sh09806'; exit 1 ) -# ============= aperture/Makefile ============== -if test ! -d 'aperture'; then - $echo $echo_n 'x -' 'aperture: '$echo_c - if mkdir 'aperture'; then $echo 'created'; else $echo 'failed to create'; fi -fi -if test -f 'aperture/Makefile' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'aperture/Makefile' '(file already exists)' -else - $echo 'x -' extracting 'aperture/Makefile' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'aperture/Makefile' && +echo c - ./aperture +mkdir -p ./aperture > /dev/null 2>&1 +# +echo x - ./aperture/Makefile +sed 's/^X//' >./aperture/Makefile << 'END-of-./aperture/Makefile' X# X# File: makefile for aperture Framebuffer Driver X# Author: Doug Anson ([email protected]) @@ -46,14 +36,22 @@ X# Date: 2001.06.08 X# - SPARC support, cleanup and turf aptest. X# -X# >>NOTE<< Have a look at Makefile.sun4u for sun4u specifics. +X# >>NOTE<< Have a look at Makefile.sparcv9 for specifics. X# +X# Modified: Martin Bochnig ([email protected]) +X# Date: 2006.06.24 +X# - Slightly modified to also build on Solaris 10 and 11. +X# - amd64 64 bit kernel support +X# - cosmetical changes to also support sun4v, not only sun4u +X# +X# >>NOTE<< Have a look at Makefile.amd64 for amd64 specifics. +X# X# GNU gcc compiler XCC=gcc XCFLGS=-fno-builtin -Wall -O3 X X# -X# Proworks compiler +X# SUNWspro compiler X#CC=/opt/SUNWspro/bin/cc X#CFLGS=-Xa -xnolib -xO3 X @@ -75,8 +73,8 @@ Xall: $(DRIVER) X X$(DRIVER): $(OBJS) -X @if [ -f "Makefile.`uname -m`" ]; then \ -X make -f Makefile.`uname -m` $(DRIVER); \ +X @if [ -f "Makefile.`isainfo -k`" ]; then \ +X make -f Makefile.`isainfo -k` $(DRIVER); \ X else \ X rm -f $(DRIVER); \ X ld -r -o $(DRIVER) $(OBJS); \ @@ -83,8 +81,8 @@ X fi X Xinstall: $(DRIVER) -X @if [ -f "Makefile.`uname -m`" ]; then \ -X make -f Makefile.`uname -m` install; \ +X @if [ -f "Makefile.`isainfo -k`" ]; then \ +X make -f Makefile.`isainfo -k` install; \ X else \ X cp aperture.conf /kernel/drv; \ X cp $(DRIVER) /kernel/drv; \ @@ -91,10 +89,10 @@ X fi X Xadd_drv: -X @if [ -f "Makefile.`uname -m`" ]; then \ -X make -f Makefile.`uname -m` add_drv; \ +X @if [ -f "Makefile.`isainfo -k`" ]; then \ +X make -f Makefile.`isainfo -k` add_drv; \ X else \ -X add_drv /kernel/drv/aperture; \ +X add_drv aperture; \ X fi X Xclean: @@ -106,54 +104,181 @@ X $(CC) -E $(CFLAGS) $*.c > $@ X X.c.o: -X @if [ -f "Makefile.`uname -m`" ]; then \ -X make -f Makefile.`uname -m` $@; \ +X @if [ -f "Makefile.`isainfo -k`" ]; then \ +X make -f Makefile.`isainfo -k` $@; \ X else \ X rm -f $@; \ X $(CC) -c $(CFLAGS) $*.c -o $@; \ X fi -SHAR_EOF - : || $echo 'restore of' 'aperture/Makefile' 'failed' -fi -# ============= aperture/README ============== -if test -f 'aperture/README' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'aperture/README' '(file already exists)' -else - $echo 'x -' extracting 'aperture/README' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'aperture/README' && -XFramebuffer apperture driver. +END-of-./aperture/Makefile +echo x - ./aperture/Makefile.amd64 +sed 's/^X//' >./aperture/Makefile.amd64 << 'END-of-./aperture/Makefile.amd64' +X# +X# File: Makefile for aperture Framebuffer Driver +X# Author: Doug Anson ([email protected]) +X# Date: 2/15/94 +X# Modified: David Holland ([email protected]) +X# Date: 2/23/94 +X# - Changed name, and debugging structure +X# Modified: Marc Aurele La France ([email protected]) +X# Date: 2001.06.08 +X# - SPARC support, cleanup and turf aptest. +X# Modified: Martin Bochnig ([email protected]) +X# - amd64 64 bit kernel support, cosmetics and also +X# supporting sun4v (and arbitrary sparcv9) platforms +X# as well as SunOS 5.10 or higher now +X# - Changed name +X# X +X# +X# GNU gcc compiler, version 3.2 or later +X# +XCC=gcc +XCFLGS=-fno-builtin -Wall -O3 -m64 -mcmodel=kernel +X +X# +X# SUNWspro compiler (untested, might not properly work for amd64 here) +X#CC=/opt/SUNWspro/bin/cc +X#CFLGS=-Xa -xarch=v9 -xnolib -xO3 +X +X# +X# Debug error reporting +X#DEBUG_FLG= +X#DEBUG_FLG=-DAPERTURE_DEBUG +X +X# +X# Files and object declarations +XKERNEL_FLGS=-D_KERNEL -DSUNDDI +XCFLAGS= $(CFLGS) $(KERNEL_FLGS) $(DEBUG_FLG) +XCFILES= aperture.c +XOBJS= aperture.o +XDRIVER= aperture +X +X# +X# Make rules +Xall: $(DRIVER) +X +X$(DRIVER): $(OBJS) +X rm -f $(DRIVER) +X ld -r -o $(DRIVER) $(OBJS) +X +Xinstall: $(DRIVER) +X cp aperture.conf /kernel/drv +X cp $(DRIVER) /kernel/drv/amd64 +X +Xadd_drv: +X add_drv aperture +X +Xclean: +X rm -f *% *.BAK $(OBJS) $(DRIVER) core +X +X.SUFFIXES: .i +X +X.c.i: +X $(CC) -E $(CFLAGS) $*.c > $@ +END-of-./aperture/Makefile.amd64 +echo x - ./aperture/Makefile.sparcv9 +sed 's/^X//' >./aperture/Makefile.sparcv9 << 'END-of-./aperture/Makefile.sparcv9' +X# +X# File: makefile for aperture Framebuffer Driver +X# Author: Doug Anson ([email protected]) +X# Date: 2/15/94 +X# Modified: David Holland ([email protected]) +X# Date: 2/23/94 +X# - Changed name, and debugging structure +X# Modified: Marc Aurele La France ([email protected]) +X# Date: 2001.06.08 +X# - SPARC support, cleanup and turf aptest. +X# Modified: Martin Bochnig ([email protected]) +X# Date: 2006.06.24 +X# - Changed name for generic sparcv9 support +X# - updated to better work with Solaris 10 and 11 +X# +X +X# +X# GNU gcc compiler, version 3.2 or later +X# +XCC=gcc +XCFLGS=-fno-builtin -Wall -O3 -m64 +X +X# +X# SUNWspro compiler +X#CC=/opt/SUNWspro/bin/cc +X#CFLGS=-Xa -xarch=v9 -xnolib -xO3 +X +X# +X# Debug error reporting +X#DEBUG_FLG= +X#DEBUG_FLG=-DAPERTURE_DEBUG +X +X# +X# Files and object declarations +XKERNEL_FLGS=-D_KERNEL -DSUNDDI +XCFLAGS= $(CFLGS) $(KERNEL_FLGS) $(DEBUG_FLG) +XCFILES= aperture.c +XOBJS= aperture.o +XDRIVER= aperture +X +X# +X# Make rules +Xall: $(DRIVER) +X +X$(DRIVER): $(OBJS) +X rm -f $(DRIVER) +X ld -r -o $(DRIVER) $(OBJS) +X +Xinstall: $(DRIVER) +X cp aperture.conf /kernel/drv +X cp $(DRIVER) /kernel/drv/sparcv9 +X +Xadd_drv: +X add_drv aperture +X +Xclean: +X rm -f *% *.BAK $(OBJS) $(DRIVER) core +X +X.SUFFIXES: .i +X +X.c.i: +X $(CC) -E $(CFLAGS) $*.c > $@ +END-of-./aperture/Makefile.sparcv9 +echo x - ./aperture/README +sed 's/^X//' >./aperture/README << 'END-of-./aperture/README' +XFramebuffer aperture driver. +X XThis driver was written to provide a device that, unlike /dev/mem, allows Xmmap()'ing of ranges beyond installed memory. X -XThe original x86-based version of this driver was the corroborative work of +XThe original x86-based version of this driver was the collaborative work of XDoug Anson ([email protected]), and David Holland ([email protected]). It has since -Xbeen rewritten to also work on sun4u machines. +Xbeen rewritten to also work on sparc machines and - later on - also on sparcv9 +Xand recently amd64 64 bit kernels. +XIt flawlessly compiles and installs on Solaris 10 and 11 now. X X XInstallation instructions: X X1) Check the Makefile, for appropriate CC, and CFLAGS definitions. Compiling -X with APERTURE_DEBUG defined means the driver will generate reams of +X with APERTURE_DEBUG defined means, the driver will generate streams of X debugging output. You'll probably want to leave this off... X -X2) type 'make'. The driver and test program should compile with out any -X problems. There also should not be any warning messages. +X2) Type 'make' (or 'gmake'). Both the driver and test program should compile +X without any problems. No warning messages should be generated. X X3) Become 'root'. X -X4) type 'make install' and 'make add_drv'. The screen should look something +X4) Type 'make install' and 'make add_drv'. The screen should look something X like this: X X # make install X cp aperture aperture.conf /kernel/drv X # make add_drv -X add_drv /kernel/drv/aperture +X add_drv aperture X -X On a sun4u machine this will mention the /kernel/drv/sparcv9 directory -X instead of /kernel/drv. +X On a sparcv9 machine this will mention the /kernel/drv/sparcv9 directory +X instead of /kernel/drv. Similarily /kernel/drv/amd64 should be used on amd64. X -X This installs the driver in the system. +X This installs the driver to the system. X X5) While as root modify the file /etc/devlink.tab, adding these lines: X @@ -163,7 +288,7 @@ X Add that line exactly as shown. You may also simply add the X contents of the devlink.tab file supplied to /etc/devlink.tab. X It contains the lines as well. (Yes, that is a tab between -X aperture, and fbs, not spaces - very important) +X aperture and fbs, not spaces - very important) X X6) Perform a reconfiguration boot of the system. X @@ -171,15 +296,9 @@ X # init 6 X XBug reports, questions, suggestions, etc can be sent to [email protected]. -SHAR_EOF - : || $echo 'restore of' 'aperture/README' 'failed' -fi -# ============= aperture/aperture.c ============== -if test -f 'aperture/aperture.c' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'aperture/aperture.c' '(file already exists)' -else - $echo 'x -' extracting 'aperture/aperture.c' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'aperture/aperture.c' && +END-of-./aperture/README +echo x - ./aperture/aperture.c +sed 's/^X//' >./aperture/aperture.c << 'END-of-./aperture/aperture.c' X/* X * Copyright (C) 2001 The XFree86 Project, Inc. All Rights Reserved. X * @@ -210,6 +329,13 @@ X * Aperture driver for Solaris. X */ X +X/* +X * Modified: Martin Bochnig ([email protected]) +X * Log: Commented out obsolete kernel interfaces DDI_IDENTIFIED and DDI_NOT_IDENTIFIED +X * not supported by SunOS 5.10 or higher anymore, +X * see http://docs.sun.com/app/docs/doc/819-2255/6n4ibnffr?a=view +X */ +X X#include <sys/conf.h> X#include <sys/ddi.h> X#include <sys/modctl.h> @@ -412,9 +538,9 @@ X#endif X X if (strcmp(ddi_get_name(dip), DEV_IDENT)) -X error = DDI_NOT_IDENTIFIED; +X error = 1 /* DDI_NOT_IDENTIFIED obsolete since SunOS 5.10 */ ; X else -X error = DDI_IDENTIFIED; +X error = 2 /* DDI_IDENTIFIED obsolete since SunOS 5.10 */ ; X X#ifdef APERTURE_DEBUG X @@ -465,7 +591,7 @@ X { X error = ddi_create_minor_node(dip, ddi_get_name(dip), S_IFCHR, X (minor_t)ddi_get_instance(dip), -X NULL, NODESPECIFIC_DEV); +X NULL, 0 /* NODESPECIFIC_DEV obsolete since SunOS 5.10 */ ); X X if (error == DDI_SUCCESS) X { @@ -653,15 +779,9 @@ X X return error; X} -SHAR_EOF - : || $echo 'restore of' 'aperture/aperture.c' 'failed' -fi -# ============= aperture/aperture.conf ============== -if test -f 'aperture/aperture.conf' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'aperture/aperture.conf' '(file already exists)' -else - $echo 'x -' extracting 'aperture/aperture.conf' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'aperture/aperture.conf' && +END-of-./aperture/aperture.c +echo x - ./aperture/aperture.conf +sed 's/^X//' >./aperture/aperture.conf << 'END-of-./aperture/aperture.conf' X# X# Copyright 1994 Doug Anson, [email protected] & David Holland, [email protected] X# @@ -678,91 +798,11 @@ X# Purpose: This conf file is used by the aperture driver. X# Xname="aperture" parent="pseudo"; -SHAR_EOF - : || $echo 'restore of' 'aperture/aperture.conf' 'failed' -fi -# ============= aperture/devlink.tab ============== -if test -f 'aperture/devlink.tab' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'aperture/devlink.tab' '(file already exists)' -else - $echo 'x -' extracting 'aperture/devlink.tab' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'aperture/devlink.tab' && +END-of-./aperture/aperture.conf +echo x - ./aperture/devlink.tab +sed 's/^X//' >./aperture/devlink.tab << 'END-of-./aperture/devlink.tab' X# The following entry is for the aperture driver Xtype=ddi_pseudo;name=aperture fbs/\M0 -SHAR_EOF - : || $echo 'restore of' 'aperture/devlink.tab' 'failed' -fi -# ============= aperture/Makefile.sun4u ============== -if test -f 'aperture/Makefile.sun4u' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'aperture/Makefile.sun4u' '(file already exists)' -else - $echo 'x -' extracting 'aperture/Makefile.sun4u' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'aperture/Makefile.sun4u' && -X# -X# File: makefile for aperture Framebuffer Driver -X# Author: Doug Anson ([email protected]) -X# Date: 2/15/94 -X# Modified: David Holland ([email protected]) -X# Date: 2/23/94 -X# - Changed name, and debugging structure -X# Modified: Marc Aurele La France ([email protected]) -X# Date: 2001.06.08 -X# - SPARC support, cleanup and turf aptest. -X# -X -X# -X# GNU gcc compiler, version 3.2 or later -X# -XCC=gcc -XCFLGS=-fno-builtin -Wall -O3 -m64 -X -X# -X# Proworks compiler -X#CC=/opt/SUNWspro/bin/cc -X#CFLGS=-Xa -xarch=v9 -xnolib -xO3 -X -X# -X# Debug error reporting -X#DEBUG_FLG= -X#DEBUG_FLG=-DAPERTURE_DEBUG -X -X# -X# Files and object declarations -XKERNEL_FLGS=-D_KERNEL -DSUNDDI -XCFLAGS= $(CFLGS) $(KERNEL_FLGS) $(DEBUG_FLG) -XCFILES= aperture.c -XOBJS= aperture.o -XDRIVER= aperture -X -X# -X# Make rules -Xall: $(DRIVER) -X -X$(DRIVER): $(OBJS) -X rm -f $(DRIVER) -X ld -r -o $(DRIVER) $(OBJS) -X -Xinstall: $(DRIVER) -X cp aperture.conf /kernel/drv -X cp $(DRIVER) /kernel/drv/sparcv9 -X -Xadd_drv: -X add_drv /kernel/drv/sparcv9/aperture -X -Xclean: -X rm -f *% *.BAK $(OBJS) $(DRIVER) core -X -X.SUFFIXES: .i -X -X.c.i: -X $(CC) -E $(CFLAGS) $*.c > $@ -SHAR_EOF - : || $echo 'restore of' 'aperture/Makefile.sun4u' 'failed' -fi -$echo $shar_n 'x -' 'lock directory' "\`_sh09806': " $shar_c -if rm -fr _sh09806; then - $echo 'removed' -else - $echo 'failed to remove' -fi -exit 0 +END-of-./aperture/devlink.tab +exit +