Questions about XAA
"cckuo" <[email protected]>
| Newsgroups | gmane.comp.xfree86.devel |
|---|---|
| Message-ID | <[email protected]> |
Dear X friends: I got some questions about behaviors about XAA. Below are the log messages I excerpted from the log file as I attached: (II) VIA(0): Using XFree86 Acceleration Architecture (XAA) 8x8 color pattern filled rectangles Screen to Screen color expansion Image Writes Offscreen Pixmaps **** Setting up tile and stipple cache: 6 128x128 slots 32 8x8 color pattern slots The messages below the **** was printed from XAAInitPixmapCache in xaaPCache.c by clipping the areas passed from FBManager. And here comes my question: 1) How does XAA determine the size and # of tile and stipple cache for a given graphics controller? 2) Are there any graphic controllers with fixed features, etc., built directly into XAA? 3) Is there anyway to specifically set the slot sizes and # of slots for a given graphics controller? I mean is there options I can set in my configure file or the only way I can do is to modify the source code of frame buffer manager? If you have the same experience and got any ideas about this, please let me know. Appreciate for your help in advance. Sincerely Yours, cckuo
XFree86.0.via.log
(application/octet-stream, 31.9 KB)
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14sarge1 20050901212727 [email protected]) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.6.8-16.0508-2 i686 [ELF] Build Date: 02 September 2005 This version of XFree86 has been extensively modified by the Debian Project, and is not supported by the XFree86 Project, Inc., in any way. Bugs should be reported to the Debian Bug Tracking System; see <URL: http://www.debian.org/Bugs/Reporting >. We strongly encourage the use of the "reportbug" package and command to ensure that bug reports contain as much useful information as possible. Before filing a bug report, you may want to consult the Debian X FAQ: XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz Module Loader present OS Kernel: Linux version 2.6.15.7.ki-1 (root@HP000AE48C839D) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 PREEMPT Tue Jun 13 13:01:22 CDT 2006 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Tue Aug 1 00:29:13 2006 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Generic Monitor" (**) | |-->Device "Generic Video Card" (**) |-->Input Device "Generic Keyboard" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc104" (**) XKB: model: "pc104" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Configured Mouse" (**) |-->Input Device "Generic Mouse" (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/lib/X11/fonts/CID" does not exist. Entry deleted from font path. (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" "true" (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3123 card 1106,3123 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,03,20 hdr 00 (II) PCI: 00:11:0: chip 1106,3177 card 1106,3177 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 1106,4161 rev 50 class 04,01,00 hdr 00 (II) PCI: 00:12:0: chip 1106,3065 card 1106,0102 rev 74 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 1106,3122 card 1106,3122 rev 03 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xec000000 - 0xedffffff (0x2000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) unknown vendor (0x1106) unknown chipset (0x3122) rev 3, Mem @ 0xe8000000/26, 0xec000000/24 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xe4000000 from 0xe7ffffff to 0xe3ffffff (II) Active PCI resource ranges: [0] -1 0 0xee001000 - 0xee0010ff (0x100) MX[B] [1] -1 0 0xee000000 - 0xee0000ff (0x100) MX[B] [2] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O [3] -1 0 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [4] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) [5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [6] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [7] -1 0 0x0000e900 - 0x0000e90f (0x10) IX[B] [8] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[B] [9] -1 0 0x0000ea00 - 0x0000ea1f (0x20) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xee001000 - 0xee0010ff (0x100) MX[B] [1] -1 0 0xee000000 - 0xee0000ff (0x100) MX[B] [2] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O [3] -1 0 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [4] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) [5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [6] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [7] -1 0 0x0000e900 - 0x0000e90f (0x10) IX[B] [8] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[B] [9] -1 0 0x0000ea00 - 0x0000ea1f (0x20) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xee001000 - 0xee0010ff (0x100) MX[B] [6] -1 0 0xee000000 - 0xee0000ff (0x100) MX[B] [7] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O [8] -1 0 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [9] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [13] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [14] -1 0 0x0000e900 - 0x0000e90f (0x10) IX[B] [15] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[B] [16] -1 0 0x0000ea00 - 0x0000ea1f (0x20) IX[B] (II) LoadModule: "bitmap" (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Loading font Bitmap (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 2.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.13.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension RECORD (II) LoadModule: "speedo" (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found (II) Module speedo: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Speedo (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "via" (II) Loading /usr/X11R6/lib/modules/drivers/via_drv.o (II) Module via: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 4.1.30 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) via: driver for VIA chipsets: CLE266, KM400, K8M800 (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset CLE266 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xee001000 - 0xee0010ff (0x100) MX[B] [6] -1 0 0xee000000 - 0xee0000ff (0x100) MX[B] [7] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O [8] -1 0 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [9] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [13] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [14] -1 0 0x0000e900 - 0x0000e90f (0x10) IX[B] [15] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[B] [16] -1 0 0x0000ea00 - 0x0000ea1f (0x20) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xee001000 - 0xee0010ff (0x100) MX[B] [6] -1 0 0xee000000 - 0xee0000ff (0x100) MX[B] [7] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O [8] -1 0 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [9] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [16] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [17] -1 0 0x0000e900 - 0x0000e90f (0x10) IX[B] [18] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[B] [19] -1 0 0x0000ea00 - 0x0000ea1f (0x20) IX[B] [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) VIA(0): Depth 16, (--) framebuffer bpp 16 (==) VIA(0): RGB weight 565 (==) VIA(0): Default visual is TrueColor (==) VIA(0): Using HW cursor (==) VIA(0): Not using video BIOS to set modes (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) VIA(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Reloading /usr/X11R6/lib/modules/libvbe.a (II) VIA(0): VESA BIOS detected (II) VIA(0): VESA VBE Version 3.0 (II) VIA(0): VESA VBE Total Mem: 16384 kB (II) VIA(0): VESA VBE OEM: VIA CLE266 (II) VIA(0): VESA VBE OEM Software Rev: 1.0 (II) VIA(0): VESA VBE OEM Vendor: (II) VIA(0): VESA VBE OEM Product: (II) VIA(0): VESA VBE OEM Product Rev: (--) VIA(0): Chipset: "CLE266" (--) VIA(0): Chipset Rev.: 17 (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (--) VIA(0): mapping MMIO @ 0xec000000 with size 0x9000 (--) VIA(0): mapping BitBlt MMIO @ 0xec200000 with size 0x10000 (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) VIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) VIA(0): videoram = 33280k (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.6 (II) VIA(0): I2C bus "I2C bus 1" initialized. (II) VIA(0): I2C bus "I2C bus 2" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a (II) VIA(0): VESA VBE DDC supported (II) VIA(0): VESA VBE DDC Level 2 (II) VIA(0): VESA VBE DDC transfer in appr. 1 sec. (II) VIA(0): VESA VBE DDC read successfully (II) VIA(0): Manufacturer: HWP Model: 259a Serial#: 808925002 (II) VIA(0): Year: 2004 Week: 44 (II) VIA(0): EDID Version: 1.3 (II) VIA(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) VIA(0): Sync: Separate Composite SyncOnGreen (II) VIA(0): Max H-Image Size [cm]: horiz.: 37 vert.: 30 (II) VIA(0): Gamma: 2.20 (II) VIA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) VIA(0): First detailed timing is preferred mode (II) VIA(0): redX: 0.633 redY: 0.340 greenX: 0.295 greenY: 0.591 (II) VIA(0): blueX: 0.141 blueY: 0.096 whiteX: 0.312 whiteY: 0.328 (II) VIA(0): Supported VESA Video Modes: (II) VIA(0): 720x400@70Hz (II) VIA(0): 640x480@60Hz (II) VIA(0): 640x480@67Hz (II) VIA(0): 640x480@72Hz (II) VIA(0): 640x480@75Hz (II) VIA(0): 800x600@60Hz (II) VIA(0): 800x600@72Hz (II) VIA(0): 800x600@75Hz (II) VIA(0): 832x624@75Hz (II) VIA(0): 1024x768@60Hz (II) VIA(0): 1024x768@75Hz (II) VIA(0): 1280x1024@75Hz (II) VIA(0): 1152x870@75Hz (II) VIA(0): Manufacturer's mask: 0 (II) VIA(0): Supported Future Video Modes: (II) VIA(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) VIA(0): Supported additional Video Mode: (II) VIA(0): clock: 135.0 MHz Image Size: 376 x 301 mm (II) VIA(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) VIA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) VIA(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz (II) VIA(0): Monitor name: hp L1925 (II) VIA(0): Serial No: CNB444077J (II) VIA(0): Generic Monitor: Using hsync range of 30.00-83.00 kHz (II) VIA(0): Generic Monitor: Using vrefresh range of 56.00-76.00 Hz (II) VIA(0): Clock range: 20.00 to 230.00 MHz (II) VIA(0): Not using default mode "640x350" (vrefresh out of range) (II) VIA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "640x400" (vrefresh out of range) (II) VIA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "720x400" (vrefresh out of range) (II) VIA(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "640x480" (vrefresh out of range) (II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "800x600" (vrefresh out of range) (II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1024x768" (vrefresh out of range) (II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1024x768" (vrefresh out of range) (II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1280x960" (hsync out of range) (II) VIA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1280x1024" (hsync out of range) (II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (WW) (1600x1200,Generic Monitor) mode clock 162MHz exceeds DDC maximum 140MHz (II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (WW) (1600x1200,Generic Monitor) mode clock 175.5MHz exceeds DDC maximum 140MHz (II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1600x1200" (hsync out of range) (II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1600x1200" (hsync out of range) (II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1600x1200" (hsync out of range) (II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (WW) (1792x1344,Generic Monitor) mode clock 204.8MHz exceeds DDC maximum 140MHz (II) VIA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1856x1392" (hsync out of range) (II) VIA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1152x768" (vrefresh out of range) (II) VIA(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (WW) (1400x1050,Generic Monitor) mode clock 155.8MHz exceeds DDC maximum 140MHz (II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) VIA(0): Not using default mode "1792x1344" (width too large for virtual size) (II) VIA(0): Not using default mode "1600x1200" (width too large for virtual size) (II) VIA(0): Not using default mode "1600x1200" (width too large for virtual size) (II) VIA(0): Not using default mode "1400x1050" (width too large for virtual size) (II) VIA(0): Not using default mode "1400x1050" (width too large for virtual size) (II) VIA(0): Not using default mode "1280x1024" (width too large for virtual size) (II) VIA(0): Not using default mode "1280x1024" (width too large for virtual size) (II) VIA(0): Not using default mode "1280x960" (width too large for virtual size) (II) VIA(0): Not using default mode "1152x864" (width too large for virtual size) (--) VIA(0): Virtual size is 1024x768 (pitch 1024) (**) VIA(0): *Mode "1024x768_60.00": 64.1 MHz (scaled from 0.0 MHz), 47.7 kHz, 60.0 Hz (II) VIA(0): Modeline "1024x768_60.00" 64.11 1024 1080 1184 1344 768 769 772 795 -hsync +vsync (**) VIA(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz (II) VIA(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (**) VIA(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz (II) VIA(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (**) VIA(0): Default mode "1024x768": 65.0 MHz (scaled from -0.0 MHz), 48.4 kHz, 60.0 Hz (II) VIA(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) VIA(0): Default mode "832x624": 57.3 MHz (scaled from -0.0 MHz), 49.7 kHz, 74.6 Hz (II) VIA(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) VIA(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (II) VIA(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (**) VIA(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz (II) VIA(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) VIA(0): Default mode "800x600": 40.0 MHz (scaled from -0.0 MHz), 37.9 kHz, 60.3 Hz (II) VIA(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) VIA(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz (II) VIA(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) VIA(0): Default mode "640x480": 31.5 MHz (scaled from -0.0 MHz), 37.5 kHz, 75.0 Hz (II) VIA(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) VIA(0): Default mode "640x480": 31.5 MHz (scaled from -0.0 MHz), 37.9 kHz, 72.8 Hz (II) VIA(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (**) VIA(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (II) VIA(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (++) VIA(0): DPI set to (100, 100) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) VIA(0): Option: Cap0_FieldSwap Disabled (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xec000000 - 0xecffffff (0x1000000) MS[B] [1] 0 0 0xe8000000 - 0xebffffff (0x4000000) MS[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xee001000 - 0xee0010ff (0x100) MX[B] [8] -1 0 0xee000000 - 0xee0000ff (0x100) MX[B] [9] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O [10] -1 0 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [11] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [18] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [19] -1 0 0x0000e900 - 0x0000e90f (0x10) IX[B] [20] -1 0 0x0000eb00 - 0x0000eb1f (0x20) IX[B] [21] -1 0 0x0000ea00 - 0x0000ea1f (0x20) IX[B] [22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (--) VIA(0): mapping framebuffer @ 0xe8000000 with size 0x2080000 (II) VIA(0): Splitting WC range: base: 0xe8000000, size: 0x2080000 (==) VIA(0): Write-combining range (0xea000000,0x80000) (==) VIA(0): Write-combining range (0xe8000000,0x2080000) (--) VIA(0): Frame buffer start: 0xb5c8b000, free start: 0x180000 end: 0x2080000 (--) VIA(0): mapping MMIO @ 0xec000000 with size 0x9000 (--) VIA(0): mapping BitBlt MMIO @ 0xec200000 with size 0x10000 (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) VIA(0): I2C device "I2C bus 2:TV" registered at address 0x00. (II) VIA(0): I2C device "I2C bus 2:TV" removed. (II) VIA(0): 3D Engine has been initialized. (II) VIA(0): VIAInternalScreenInit (II) VIA(0): Clipping pixmap cache for old DRI/DRM module. (II) VIA(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles 8x8 color pattern filled rectangles Screen to Screen color expansion Solid Lines Dashed Lines Image Writes Offscreen Pixmaps Setting up tile and stipple cache: 6 128x128 slots 32 8x8 color pattern slots (==) VIA(0): Backing store disabled (**) Option "dpms" (**) VIA(0): DPMS enabled (II) VIA(0): direct rendering disabled (II) VIA(0): I2C device "I2C bus 2:TV Probe" registered at address 0x88. (II) VIA(0): I2C device "I2C bus 2:SAA7113H" removed. (II) VIA(0): I2C device "I2C bus 2:SAA7113H" removed. (II) VIA(0): I2C device "I2C bus 2:SAA7114H" removed. (II) VIA(0): I2C device "I2C bus 2:TV Probe" removed. (==) RandR enabled Symbol drmRmMap from module /usr/X11R6/lib/modules/drivers/via_drv.o is unresolved! Symbol drmAgpUnbind from module /usr/X11R6/lib/modules/drivers/via_drv.o is unresolved! Symbol drmRmMap from module /usr/X11R6/lib/modules/drivers/via_drv.o is unresolved! Symbol drmAgpUnbind from module /usr/X11R6/lib/modules/drivers/via_drv.o is unresolved! (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Keyboard "Generic Keyboard" handled by legacy driver (**) Option "Protocol" "ImPS/2" (**) Configured Mouse: Protocol: "ImPS/2" (**) Option "CorePointer" (**) Configured Mouse: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "true" (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 (**) Configured Mouse: Buttons: 5 (**) Option "Protocol" "ImPS/2" (**) Generic Mouse: Protocol: "ImPS/2" (**) Option "SendCoreEvents" "true" (**) Generic Mouse: always reports core events (**) Option "Device" "/dev/psaux" (**) Option "Emulate3Buttons" "true" (**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Generic Mouse: ZAxisMapping: buttons 4 and 5 (**) Generic Mouse: Buttons: 5 (II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE) (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) (II) Configured Mouse: ps2EnableDataReporting: succeeded (II) Generic Mouse: ps2EnableDataReporting: succeeded Warning: font renderer for ".pcf" already registered at priority 0 Warning: font renderer for ".pcf.Z" already registered at priority 0 Warning: font renderer for ".pcf.gz" already registered at priority 0 Warning: font renderer for ".snf" already registered at priority 0 Warning: font renderer for ".snf.Z" already registered at priority 0 Warning: font renderer for ".snf.gz" already registered at priority 0 Warning: font renderer for ".bdf" already registered at priority 0 Warning: font renderer for ".bdf.Z" already registered at priority 0 Warning: font renderer for ".bdf.gz" already registered at priority 0 Warning: font renderer for ".pmf" already registered at priority 0 Could not init font path element unix/:7100, removing from list!