Re: siliconmotion CSync output ?
bruno schwander <[email protected]>
| Newsgroups | gmane.comp.xfree86.devel |
|---|---|
| Message-ID | <[email protected]> |
On Thu, 8 Mar 2007, Tim Roberts wrote: > bruno schwander wrote: >> ah never mind. since this is interlaced, the pixel clock needs to be >> half that to get the right frame refresh rate (60Hz) with a pixel >> clock of 12.22MHz, it passes. >> >> Now, I am not sure if the pixel clock is effectively set to that, and >> my lcd still does not sync, so either the pixel clock is not set right >> or the SMI712 is not outputting composite sync (despite my hack to >> enable it) > > You have an LCD that expects 640x480 interlaced? Really? RGB input, 640x480 interlaced, composite sync. yes, it expects that and can't take anything else when in RGB mode. It can take a composite signal too, and outputs v/h sync pulses to synchronize overlaying with RGB signals, in that mode RGB inputs are 2v and digtal. Or it can be switched to RGB but requires composite sync in that case. strange beast indeed. Usually for DVD players with some microcontroller generating some on-screen display I believe. Bruno > > -- > Tim Roberts, [email protected] > Providenza & Boekelheide, Inc. > > _______________________________________________ > Devel mailing list > [email protected] > http://XFree86.Org/mailman/listinfo/devel > >