Re: Radeon 7000 TVout Modeline

Dr Andrew C Aitchison a écrit :
> I'm not sure that that rule still applies - you could try adding or 
> subtracting 4 to HFL.
perhaps... 
>  
> > So to get finest control to Horizontal Freq, I tried to adjust dot
> > clock frequency. But, strangely, it seems to have no effect on
> > horizontal freq, but just on vertical one : I must adjust VFL
> > to get a stable image but, it stays the same.
> > 
> > All configs I tried to get 640x480 or 800x600 (tring to be as close 
> > as possible to 31.5 kHz Hori / 50 Hz vert) are worth.
>  
> > I tried thousends options, PanelSize, composite_sync, NoDDC... None
> > of them had any effect.
> 
> You don't mention "Interlace" which is a flag on ModeLine.
> PAL TV pictures are interlaced, so that might help, although
> the card might be doing that already.
I tried, it's worth.

Modelines is not the solution. I use devel branch from gatos cvs and now it is working.
Thanks for your suggests.

--
       Sébastien Devaux <[email protected]>            
\\//,  http://www.freesoftware.fsf.org/gsp/  
	   http://www.freesoftware.fsf.org/naja/