Re: [Xpert]mouse configuration

What version is your linux kernel?

I had this problem with a logitech usb mouse when using a 2.2 kernel. 
The mouse would freeze up whenever there was any load at all, and on a 
2Ghz P4.  Upgrading my kernel to 2.4.19 fixed the problem.  This was 
with debian sid.

Fabian Niestroj wrote:
> Hi.
> 
> When the system load is high, for example a program is starting or mozilla is loading a page, and I'm moving the mouse, the pointer on the screen is not moving continuously but jumping. Is there a way to fix it?
> 
> My system: Geforce2 MX, Athlon TB 800, mouse: optic, wheel, ps2/usb, SuSE 8.1, XFree 4.0.2, Nvidia 1.0-4191.
> 
> My XF86Config:
> Section "InputDevice"
>   Driver       "mouse"
>   Identifier   "Mouse[1]"
>   Option       "ButtonNumber" "3"
>   Option       "Device" "/dev/input/mice"
>   Option       "Name" "Autodetection"
>   Option       "Protocol" "imps/2"
>   Option       "Vendor" "Sysp"
>   Option       "ZAxisMapping" "4 5"
>   Option       "Resolution" "300"
> EndSection
> 
> I tried to optimize the mouse: According to Logitech the resolution of the mouse is higher if the usb connector is used. But then I read the option "Resolution" is only applicable if the ps2 connector is used. And what values for "Resolution" are allowed? Although the mouse is now connected to a usb port, the protocol is "imps/2" and not "usb".
> 
> The document "Mouse Support in XFree86" couldn't answer my questions.
> 
> Thanks for your help.
> 
> Fabian
> ______________________________________________________________________________
> Ihr FreeMail-Postfach kann von jedem Telekom Festnetzanschluss erreicht
> werden? Mit der Voicebox - http://freemail.web.de/features/?mc=021163
> 
> _______________________________________________
> Xpert mailing list
> [email protected]
> http://XFree86.Org/mailman/listinfo/xpert