mandrake 9.1 xserver problems

"John" <[email protected]>
Newsgroups gmane.comp.xfree86.forum
Organization Ois
Message-ID <[email protected]>
Hi 
I would imagine that as I am a novice the following problem will be easy to solve yet it is causing me headaches
I was running mandrake 9.0 and the x server worked although the screen was sluggish and I upgraded to mandrake 9.1 and I cant get a GUI. All other aspects of the system are fine (network etc) when I give the command startx I get the following message

XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: model: "pc105"
(**) XKB: layout: "gb"
(**) XKB: options: ""
(**) Mouse: type: IMPS/2, device: /dev/psaux, buttons: 5
(**) Mouse: zaxismapping: (-)4 (+)5
(**) SVGA: Graphics device ID: "device1"
(**) SVGA: Monitor ID: "monitor1"
(--) SVGA: Mode "1024x480" needs vert refresh rate of 85.90 Hz. Deleted.
(--) SVGA: Mode "768x576" needs hsync freq of 50.00 kHz. Deleted.
(--) SVGA: Mode "768x576" needs hsync freq of 61.59 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
(--) SVGA: Mode "640x400" needs vert refresh rate of 85.08 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 75.00 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 85.01 Hz. Deleted.
(--) SVGA: Mode "1152x864" needs vert refresh rate of 89.18 Hz. Deleted.
(--) SVGA: Mode "800x600" needs vert refresh rate of 72.19 Hz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1400x1050" needs hsync freq of 64.89 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 79.98 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1400x1050" needs hsync freq of 81.49 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 106.25 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) SVGA: Mode "1920x1440" needs hsync freq of 90.00 kHz. Deleted.
(--) SVGA: Mode "1920x1440" needs hsync freq of 112.50 kHz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted.
(--) SVGA: Mode "320x240" needs vert refresh rate of 75.14 Hz. Deleted.
(--) SVGA: Mode "400x300" needs vert refresh rate of 72.19 Hz. Deleted.
(--) SVGA: Mode "480x300" needs vert refresh rate of 72.07 Hz. Deleted.
(**) FontPath set to "unix/:-1"
(--) SVGA: PCI: ATI Mach64 GT Pro rev 92, Memory @ 0xaf000000, 0xde000000, I/O @ 0xe000
Using XFree86 ATI driver version 4.7.
ATI 3D Rage Pro graphics controller detected.
Chip type 4742 "GB", version 4, foundry UMC, class 0, revision 0x01.
AGP interface detected;  Block I/O base is 0xE000.
ATI Mach64 video adapter detected.
Internal RAMDAC (subtype 1) detected.
Using 8MB linear aperture at 0xAF000000.
4096 kB of Pseudo-EDO DRAM detected.
Internal programmable clock generator detected.
Reference clock 157.5/11 (14.318) MHz.
(--) SVGA: chipset:  ati
(--) SVGA: videoram: 4096k
(**) SVGA: Option "power_saver"
(**) SVGA: Using 24 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 230.000 MHz
(**) SVGA: Mode "1024x768": mode clock =  65.000
(**) SVGA: Mode "800x600": mode clock =  40.000
(**) SVGA: Mode "640x480": mode clock =  25.175
(--) SVGA: Virtual resolution set to 1024x768

Of all aspects of unix I have found this the hardest to manage
Help please!

John
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.