RE: want to be a hardware developer ?

"Rich Murphey" <[email protected]>
Newsgroups gmane.comp.xfree86.forum
Message-ID <000201c2f3ad$b3f33ef0$690010ac@a>
SoftIce has watchpoints.  If you're debugging
a video driver it may help to do remote debugging.
A null modem connection between two PCs is the easiest
to set up SoftIce for remote debugging.

> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of David Wexelblat
> Sent: Wednesday, March 26, 2003 8:24 AM
> To: [email protected]
> Subject: RE: [forum] want to be a hardware developer ?
> 
> 
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]] On Behalf Of Sven Luther
> > Sent: Wednesday, March 26, 2003 7:48 AM
> > To: [email protected]
> > Subject: Re: [forum] want to be a hardware developer ?
> > 
> > 
> > On Tue, Mar 25, 2003 at 07:54:38PM -0500, Vladimir Dergachev wrote:
> > >      * Port it to Windows. You can use hws_win from
> > >        http://gatos.sf.net/apps.php for direct access to 
> > >        memory mapped hardware (this is windows port of
> > >        hw_script - though PCI id scanning is not supported yet).
> > 
> > Hey, do you pre chance know of a windows tool to snoop what a
> > particular driver writes to the register aperture ?
> > 
> 
> I THINK you can do this with SoftICE from CompuWare:
> http://www.compuware.com/products/driverstudio/ds/softice.htm
> 
> This is the tool that most of the driver-writers that I've 
> worked with use.
> But I've never worked with people doing Windows video drivers.
> 
> I've never played with modern video hardware at this level on 
> Windows (I
> wrote some stuff to do this back in "the day" on Win31 and 
> Win95, but that
> was port probing/tracking, mot memory mapped registers).
> 
> > Friendly,
> > 
> > Sven Luther
> 
> -- 
> David Wexelblat, Chief Architect    mailto:[email protected]
> America Online, Inc                 http://www.aol.com/
> 44900 Prentice Drive - 24B:P08      (703) 265-1158 (voice)
> Dulles, VA 20166                    (703) 265-1301 (fax)
> 	
> Please send private email to: mailto:[email protected]
> 
> 
> _______________________________________________
> Forum mailing list
> [email protected]
> http://XFree86.Org/mailman/listinfo/forum
> 
> 
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.