Re: Problem configuring Elo Touchscreen

XFree86 4.2 uses the config file /etc/X11/XF86Config-4 not 
/etc/X11/XF86Config. Did you add the changes to the righ file? I have a 
similar setup. It works fine

Rahul

Scott Wentzel wrote:

>I am using XFree86 4.2 under Suse Linux 8.0 with a linux kernel of 2.4.18.
>I have an Elo Touchscreen.  I have followed the EloTouch installation
>instructions in setting up the /etc/X11/XF86Config file manually, and I have
>also ran the SaX2 program to setup that config file automatically, but I
>still cannot get the EloTouch screen to work.  The XF86Config file looks
>like something like this, although I have tried many variations in my
>attempts:
>
>			Added to "ServerLayout" section
>				'Inputdevice "touchscreen1"
>"SendCoreEvents"'
>			Added an "InputDevice" section
>				'Section "InputDevice"
>				Identifier "touchscreen1"
>				Driver "elographics"
>				Option "Device" "/dev/ttyS2"
>				Option "AlwaysCore"
>				Option "screenno" "0"
>				Option "MinX" "600"
>				Option "MaxX" "3600"
>				Option "MinY" "600"
>				Option "MaxY" "3600"
>				Option "UntouchDelay" "3"
>				Option "ReportDelay" "1"
>				EndSection'
>
>Then I restart the X Server by logging out, and I have also tried rebooting,
>but It still doesn't work.  I also noticed I get an error message in the
>/var/log/Xfree86.0.log file.  I dont know if its related or not, but the
>error is:
>	Not at the specified rate or model 2310, will continue
>	Unable to ask Elographics touchscreen identification
>
>
>
>Is there anyone who might be able to help me figure out what I'm missing ?
>
>Thanks...
>
>===================================
>Scott Wentzel
>Rite Solutions
>1272 West Main Rd, Middletown, RI, 02842
>[email protected]
>www.rite-solutions.com
>(401) 847-3399 x26 (office)
>(401) 847-8833 (fax)
>===================================
>



_______________________________________________
Newbie mailing list
[email protected]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie