[PATCH 2/4] wmlongrun: Add version 0.3.0pre1 to repository.
Doug Torrance <[email protected]>
| Newsgroups | gmane.compw.window-managers.windowmaker.devel |
|---|---|
| Message-ID | <[email protected]> |
From: http://gentoo.osuosl.org/distfiles/wmlongrun-0.3.0pre1.tar.gz --- wmlongrun/AUTHORS | 3 + wmlongrun/COPYING | 340 +++++ wmlongrun/ChangeLog | 34 + wmlongrun/INSTALL | 71 + wmlongrun/MAKEDEV-cpuid-msr | 7 + wmlongrun/Makefile.am | 4 + wmlongrun/Makefile.in | 363 +++++ wmlongrun/NEWS | 1 + wmlongrun/README | 69 + wmlongrun/TODO | 8 + wmlongrun/acconfig.h | 5 + wmlongrun/acinclude.m4 | 27 + wmlongrun/aclocal.m4 | 185 +++ wmlongrun/config.guess | 1320 ++++++++++++++++++ wmlongrun/config.h.in | 38 + wmlongrun/config.sub | 1443 ++++++++++++++++++++ wmlongrun/configure | 2874 +++++++++++++++++++++++++++++++++++++++ wmlongrun/configure.in | 129 ++ wmlongrun/doc/Makefile.am | 5 + wmlongrun/doc/Makefile.in | 226 +++ wmlongrun/doc/wmlongrun.1 | 82 ++ wmlongrun/install-sh | 251 ++++ wmlongrun/missing | 198 +++ wmlongrun/mkinstalldirs | 40 + wmlongrun/src/Makefile.am | 33 + wmlongrun/src/Makefile.in | 300 ++++ wmlongrun/src/backdrop_led.xpm | 125 ++ wmlongrun/src/backdrop_off.xpm | 71 + wmlongrun/src/backdrop_on.xpm | 68 + wmlongrun/src/common.h | 11 + wmlongrun/src/dockapp.c | 391 ++++++ wmlongrun/src/dockapp.h | 96 ++ wmlongrun/src/longrun.h | 10 + wmlongrun/src/longrun_freebsd.c | 80 ++ wmlongrun/src/longrun_linux.c | 199 +++ wmlongrun/src/main.c | 326 +++++ wmlongrun/src/parts.xpm | 190 +++ wmlongrun/stamp-h.in | 1 + 38 files changed, 9624 insertions(+) create mode 100644 wmlongrun/AUTHORS create mode 100644 wmlongrun/COPYING create mode 100644 wmlongrun/ChangeLog create mode 100644 wmlongrun/INSTALL create mode 100755 wmlongrun/MAKEDEV-cpuid-msr create mode 100644 wmlongrun/Makefile.am create mode 100644 wmlongrun/Makefile.in create mode 100644 wmlongrun/NEWS create mode 100644 wmlongrun/README create mode 100644 wmlongrun/TODO create mode 100644 wmlongrun/acconfig.h create mode 100644 wmlongrun/acinclude.m4 create mode 100644 wmlongrun/aclocal.m4 create mode 100755 wmlongrun/config.guess create mode 100644 wmlongrun/config.h.in create mode 100755 wmlongrun/config.sub create mode 100755 wmlongrun/configure create mode 100644 wmlongrun/configure.in create mode 100644 wmlongrun/doc/Makefile.am create mode 100644 wmlongrun/doc/Makefile.in create mode 100644 wmlongrun/doc/wmlongrun.1 create mode 100755 wmlongrun/install-sh create mode 100755 wmlongrun/missing create mode 100755 wmlongrun/mkinstalldirs create mode 100644 wmlongrun/src/Makefile.am create mode 100644 wmlongrun/src/Makefile.in create mode 100644 wmlongrun/src/backdrop_led.xpm create mode 100644 wmlongrun/src/backdrop_off.xpm create mode 100644 wmlongrun/src/backdrop_on.xpm create mode 100644 wmlongrun/src/common.h create mode 100644 wmlongrun/src/dockapp.c create mode 100644 wmlongrun/src/dockapp.h create mode 100644 wmlongrun/src/longrun.h create mode 100644 wmlongrun/src/longrun_freebsd.c create mode 100644 wmlongrun/src/longrun_linux.c create mode 100644 wmlongrun/src/main.c create mode 100644 wmlongrun/src/parts.xpm create mode 100644 wmlongrun/stamp-h.in diff --git a/wmlongrun/AUTHORS b/wmlongrun/AUTHORS new file mode 100644 index 0000000..ebd1c97 --- /dev/null +++ b/wmlongrun/AUTHORS @@ -0,0 +1,3 @@ +Main Author of wmlongrun: +Seiichi SATO <[email protected]> + diff --git a/wmlongrun/COPYING b/wmlongrun/COPYING new file mode 100644 index 0000000..d60c31a --- /dev/null +++ b/wmlongrun/COPYING @@ -0,0 +1,340 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/wmlongrun/ChangeLog b/wmlongrun/ChangeLog new file mode 100644 index 0000000..d615618 --- /dev/null +++ b/wmlongrun/ChangeLog @@ -0,0 +1,34 @@ +2002 March 23 + * version 0.2.0 released + * longrun_linux.c longrun_freebsd.c: renamed get_longrun_stat() as + longrun_get_stat() + +2002 March 14 + * dockapp.c: rewrote (taken from wmmemmon) + * backdrop_on.xpm, backdrop_off.xpm: changed bar of guage narrowly + * main.c: code cleanup/review + +2002 March 13 + * dropped the GNU coding standards:) + * longrun_freebsd.c: fixed MIB for sysctl ('hw.crusoe.longrun') + * backdrop_off.xpm: changed color of background + * made Non-GNU make fixes + * renamed wmlongrun.c to main.c + * added manpage + +2002 January 05 + * removed setgid flag under FreeBSD + +2001 November 06 + * made small color adjustment for back-light + +2001 October 16 + * made small modifications to dockapp.c + (freeing the memory that is used for wmHints, removing d_width/d_height, and + adding a argument for event-mask to DA_Initialize()) + +2001 October 30 + * added FreeBSD support + +2001 September 20 + * version 0.1.0 released.(initial release) diff --git a/wmlongrun/INSTALL b/wmlongrun/INSTALL new file mode 100644 index 0000000..3244659 --- /dev/null +++ b/wmlongrun/INSTALL @@ -0,0 +1,71 @@ + +Supported Platforms: +==================== + +- GNU/Linux (kernel 2.4.x / 2.2.18 or later) +- FreeBSD (5.0-CURRENT / 4.4-RELEASE or later) + +Patches to make it work on other platforms are welcome. + + +Requirements: +============ +- Basic obvious stuff + If you will build WMLongRun, make sure you have gcc (or some Other ANSI + C compiler).the X header files installed. + +- X11R6.x + WMLongRun can NOT be compiled in older versions of X, like X11R5 or + X11R4. Upgrading the client libraries (Xlib, Xext) will help if you + can't upgrade the server. + +- libXPM 4.7 or newer + Older versions may not work. + Available at ftp://sunsite.unc.edu/pub/Linux/libs/X/ + +- CPUID/MSR drivers. (GNU/Linux) + To run WMLongRun under GNU/Linux, you will need CPUID/MSR drivers. + These drivers have been a part of the kernel distribution since version + 2.2.18. (2.4.x kernel has already included support for CPUID/MSR.) Make + sure your kernel was compiled with 'CONFIG_X86_CPUID=y' and + 'CONFIG_X86_MSR=y'. If the CPUID/MSR drivers are not already built, you + will need to configure and build a new kernel. You can either build the + CPUID/MSR drivers into the kernel or build them as kernel loadable + modules. + +- CPUID/MSR character devices (GNU/Linux) + To get the information of the LongRun settings and status, you may need + to make the special character files in the /dev directory. Please type + as following to see if these devices already exist. + + $ ls -l /dev/cpu/0/* + crw------- 1 root root 203, 0 Sep 27 00:16 /dev/cpu/0/cpuid + cr--r--r-- 1 root root 202, 0 Sep 27 00:16 /dev/cpu/0/msr + + If not, you will need to create them. There is a MAKEDEV-cpuid-msr + script in the source distribution of WMLongRun which will create + the CPUID/MSR devices for you. You can also do it yourself. + As root, type: + + $ mkdir -m 0755 -p /dev/cpu/0 + $ mknod /dev/cpu/0/msr -m 0600 c 202 0 + $ mknod /dev/cpu/0/cpuid -m 0444 c 203 0 + + +Installation: +============= + +1: tar -zxvf wmlongrun-<version>.tar.gz +2: cd wmlongrun-<version> +3: ./configure +4: make +5: su root +6: make install (or 'make install-strip') +7: wmlongrun & + +NOTES: +- WMLongRun is installed as a setuid-root program on GNU/Linux. A setuid + program with a graphical user interface is NOT secure. Please use at your own + risk. +- Non-GNU make may not work. + e.g.) it doesn't work on FreeBSD when you run 'make clean'. diff --git a/wmlongrun/MAKEDEV-cpuid-msr b/wmlongrun/MAKEDEV-cpuid-msr new file mode 100755 index 0000000..747657a --- /dev/null +++ b/wmlongrun/MAKEDEV-cpuid-msr @@ -0,0 +1,7 @@ +#!/bin/sh + +msr_major=202 +cpuid_major=203 +mkdir -m 0755 -p /dev/cpu/0 +mknod /dev/cpu/0/msr -m 0600 c $msr_major 0 +mknod /dev/cpu/0/cpuid -m 0444 c $cpuid_major 0 diff --git a/wmlongrun/Makefile.am b/wmlongrun/Makefile.am new file mode 100644 index 0000000..727e1a9 --- /dev/null +++ b/wmlongrun/Makefile.am @@ -0,0 +1,4 @@ + +SUBDIRS = src doc + +EXTRA_DIST = MAKEDEV-cpuid-msr diff --git a/wmlongrun/Makefile.in b/wmlongrun/Makefile.in new file mode 100644 index 0000000..68d0100 --- /dev/null +++ b/wmlongrun/Makefile.in @@ -0,0 +1,363 @@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = . + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ +CC = @CC@ +DFLAGS = @DFLAGS@ +HEADER_SEARCH_PATH = @HEADER_SEARCH_PATH@ +LIBRARY_SEARCH_PATH = @LIBRARY_SEARCH_PATH@ +LIBS = @LIBS@ +MAKEINFO = @MAKEINFO@ +OS = @OS@ +PACKAGE = @PACKAGE@ +SETUID_FLAGS = @SETUID_FLAGS@ +VERSION = @VERSION@ +XCFLAGS = @XCFLAGS@ +XLFLAGS = @XLFLAGS@ +XLIBS = @XLIBS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBRARY_PATH = @X_LIBRARY_PATH@ + +SUBDIRS = src doc + +EXTRA_DIST = MAKEDEV-cpuid-msr +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \ +Makefile.am Makefile.in NEWS TODO acconfig.h acinclude.m4 aclocal.m4 \ +config.guess config.h.in config.sub configure configure.in install-sh \ +missing mkinstalldirs + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +$(ACLOCAL_M4): configure.in acinclude.m4 + cd $(srcdir) && $(ACLOCAL) + +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) + cd $(srcdir) && $(AUTOCONF) + +config.h: stamp-h + @if test ! -f $@; then \ + rm -f stamp-h; \ + $(MAKE) stamp-h; \ + else :; fi +stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES= CONFIG_HEADERS=config.h \ + $(SHELL) ./config.status + @echo timestamp > stamp-h 2> /dev/null +$(srcdir)/config.h.in: $(srcdir)/stamp-h.in + @if test ! -f $@; then \ + rm -f $(srcdir)/stamp-h.in; \ + $(MAKE) $(srcdir)/stamp-h.in; \ + else :; fi +$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h + cd $(top_srcdir) && $(AUTOHEADER) + @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null + +mostlyclean-hdr: + +clean-hdr: + +distclean-hdr: + -rm -f config.h + +maintainer-clean-hdr: + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. + +@SET_MAKE@ + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" != "." || dot_seen=yes; \ + done; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + -rm -rf $(distdir) + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) dist + -rm -rf $(distdir) + @banner="$(distdir).tar.gz is ready for distribution"; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +distdir: $(DISTFILES) + -rm -rf $(distdir) + mkdir $(distdir) + -chmod 777 $(distdir) + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + for subdir in $(SUBDIRS); do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ + || exit 1; \ + fi; \ + done +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive +check-am: all-am +check: check-recursive +installcheck-am: +installcheck: installcheck-recursive +all-recursive-am: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +install-exec-am: +install-exec: install-exec-recursive + +install-data-am: +install-data: install-data-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-recursive +uninstall-am: +uninstall: uninstall-recursive +all-am: Makefile config.h +all-redirect: all-recursive-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-recursive + +clean-am: clean-hdr clean-tags clean-generic mostlyclean-am + +clean: clean-recursive + +distclean-am: distclean-hdr distclean-tags distclean-generic clean-am + +distclean: distclean-recursive + -rm -f config.status + +maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-recursive + -rm -f config.status + +.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ +install-data-recursive uninstall-data-recursive install-exec-recursive \ +uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ +all-recursive check-recursive installcheck-recursive info-recursive \ +dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \ +install-exec-am install-exec install-data-am install-data install-am \ +install uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/wmlongrun/NEWS b/wmlongrun/NEWS new file mode 100644 index 0000000..38a7ad0 --- /dev/null +++ b/wmlongrun/NEWS @@ -0,0 +1 @@ +see ChangeLog diff --git a/wmlongrun/README b/wmlongrun/README new file mode 100644 index 0000000..3175302 --- /dev/null +++ b/wmlongrun/README @@ -0,0 +1,69 @@ +WMLongRun - A dockapp to monitor the LongRun(tm) status on Crusoe + +General Information +=================== +WMLongRun is a program to monitor for LongRun. It displays the current +LongRun(tm) settings and status: the frequency, the LongRun(tm) flags +(performance or economy), and the performance level (expressed as a percentile). + +It is a dockapp (dockable application) that is supported by X window managers +such as Window Maker, AfterStep, BlackBox, and Enlightenment. It has two user +interfaces: an LCD look-alike user interface and an LED-interface. If you select +the LCD-interfaces, the back-light may be turned on/off by clicking the mouse +button over the application. + +It runs on GNU/Linux / FreeBSD. + + +Installation +============ +See the file 'INSTALL' for instructions. + + +Copyright +========= +GPL applies all portions of the code I wrote. Please see COPYING file. + + +Usage +===== +* To turn on/off back-light, click the mouse button over the application. +* To see the following help messages, type 'wmlongrun --help'. + +$ wmlongrun [OPTIONS] + -d, --display <string> display to use + -bl, --backlight turn on back-light + -lc, --light-color <color> back-light color (rgb:6E/C6/3B is default) + -i, --interval <number> number of secs between updates (1 is default) + -cd, --cpuid-device <device> CPUID device ('/dev/cpu/0/cpuid' is default) + -md, --msr-device <device> MSR device ('/dev/cpu/0/msr' is default) + -l, --led run the application with LED interface + -h, --help show this help text and exit + -v, --version show program version and exit + -w, --windowed run the application in windowed mode + -bw, --broken-wm activate broken window manager fix + +NOTE: +'-cd, --cpuid-device','-md, --msr-device' are options for GNU/Linux. + +For AfterStep users +=================== +Add this line to your ~/GNUstep/Library/AfterStep/wharf: + + *Wharf wmlongrun - Swallow "wmlongrun" wmlongrun -w & + + +For Enlightenment users +======================= +'-bw, --broken-wm' option will help you. + + +Bug reports +=========== +Please send e-mail to [email protected] + + +URL +=== +http://www.sh.rim.or.jp/~ssato/dockapp/index.shtml#wmlongrun + diff --git a/wmlongrun/TODO b/wmlongrun/TODO new file mode 100644 index 0000000..6a56309 --- /dev/null +++ b/wmlongrun/TODO @@ -0,0 +1,8 @@ +* optimize drawing-routines (gdk-pixbuf? MIT-SHM?) +* display the current voltage + + +--- +* FreeBSD support (done) +* Non-GNU make fixes (done) +* man page (done) diff --git a/wmlongrun/acconfig.h b/wmlongrun/acconfig.h new file mode 100644 index 0000000..ab5653c --- /dev/null +++ b/wmlongrun/acconfig.h @@ -0,0 +1,5 @@ +/* use Linux specific code */ +#undef LINUX + +/* use FreeBSD specific code */ +#undef FREEBSD diff --git a/wmlongrun/acinclude.m4 b/wmlongrun/acinclude.m4 new file mode 100644 index 0000000..94f4aeb --- /dev/null +++ b/wmlongrun/acinclude.m4 @@ -0,0 +1,27 @@ +#!/bin/sh + +# $Id: acinclude.m4,v 1.3 1999/07/24 22:01:51 daeron Exp $ + +dnl +dnl DA_CHECK_LIB(NAME, FUNCTION, EXTRALIBS) +dnl +AC_DEFUN(DA_CHECK_LIB, +[ +LDFLAGS_old="$LDFLAGS" +LDFLAGS="$LDFLAGS $lib_search_path" +AC_CHECK_LIB([$1],[$2],yes=yes,no=no,[$3]) +LDFLAGS="$LDFLAGS_old" +]) + + +dnl +dnl DA_CHECK_HEADER(NAME) +dnl +AC_DEFUN(DA_CHECK_HEADER, +[ +CPPFLAGS_old="$CPPFLAGS" +CPPFLAGS="$CPPFLAGS $inc_search_path" +AC_CHECK_HEADER([$1]) +CPPFLAGS="$CPPFLAGS_old" +]) + diff --git a/wmlongrun/aclocal.m4 b/wmlongrun/aclocal.m4 new file mode 100644 index 0000000..3c9eb73 --- /dev/null +++ b/wmlongrun/aclocal.m4 @@ -0,0 +1,185 @@ +dnl aclocal.m4 generated automatically by aclocal 1.4-p6 + +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. + +#!/bin/sh + +# $Id: acinclude.m4,v 1.3 1999/07/24 22:01:51 daeron Exp $ + +dnl +dnl DA_CHECK_LIB(NAME, FUNCTION, EXTRALIBS) +dnl +AC_DEFUN(DA_CHECK_LIB, +[ +LDFLAGS_old="$LDFLAGS" +LDFLAGS="$LDFLAGS $lib_search_path" +AC_CHECK_LIB([$1],[$2],yes=yes,no=no,[$3]) +LDFLAGS="$LDFLAGS_old" +]) + + +dnl +dnl DA_CHECK_HEADER(NAME) +dnl +AC_DEFUN(DA_CHECK_HEADER, +[ +CPPFLAGS_old="$CPPFLAGS" +CPPFLAGS="$CPPFLAGS $inc_search_path" +AC_CHECK_HEADER([$1]) +CPPFLAGS="$CPPFLAGS_old" +]) + + +# Do all the work for Automake. This macro actually does too much -- +# some checks are only needed if your package does certain things. +# But this isn't really a big deal. + +# serial 1 + +dnl Usage: +dnl AM_INIT_AUTOMAKE(package,version, [no-define]) + +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL]) +PACKAGE=[$1] +AC_SUBST(PACKAGE) +VERSION=[$2] +AC_SUBST(VERSION) +dnl test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi +ifelse([$3],, +AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) +AC_REQUIRE([AM_SANITY_CHECK]) +AC_REQUIRE([AC_ARG_PROGRAM]) +dnl FIXME This is truly gross. +missing_dir=`cd $ac_aux_dir && pwd` +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) +AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) +AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) +AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) +AC_REQUIRE([AC_PROG_MAKE_SET])]) + +# Copyright 2002 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION so it can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], + [AM_AUTOMAKE_VERSION([1.4-p6])]) + +# +# Check to make sure that the build environment is sane. +# + +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "[$]*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "[$]*" != "X $srcdir/configure conftestfile" \ + && test "[$]*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "[$]2" = conftestfile + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +rm -f conftest* +AC_MSG_RESULT(yes)]) + +dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) +dnl The program must properly implement --version. +AC_DEFUN([AM_MISSING_PROG], +[AC_MSG_CHECKING(for working $2) +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if ($2 --version) < /dev/null > /dev/null 2>&1; then + $1=$2 + AC_MSG_RESULT(found) +else + $1="$3/missing $2" + AC_MSG_RESULT(missing) +fi +AC_SUBST($1)]) + +# Like AC_CONFIG_HEADER, but automatically create stamp file. + +AC_DEFUN([AM_CONFIG_HEADER], +[AC_PREREQ([2.12]) +AC_CONFIG_HEADER([$1]) +dnl When config.status generates a header, we must update the stamp-h file. +dnl This file resides in the same directory as the config header +dnl that is generated. We must strip everything past the first ":", +dnl and everything past the last "/". +AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl +ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, +<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, +<<am_indx=1 +for am_file in <<$1>>; do + case " <<$>>CONFIG_HEADERS " in + *" <<$>>am_file "*<<)>> + echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx + ;; + esac + am_indx=`expr "<<$>>am_indx" + 1` +done<<>>dnl>>) +changequote([,]))]) + diff --git a/wmlongrun/config.guess b/wmlongrun/config.guess new file mode 100755 index 0000000..db494f8 --- /dev/null +++ b/wmlongrun/config.guess @@ -0,0 +1,1320 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002 Free Software Foundation, Inc. + +timestamp='2002-02-19' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Per Bothner <[email protected]>. +# Please send patches to <[email protected]>. Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <[email protected]>." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + + +dummy=dummy-$$ +trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int dummy(){}" > $dummy.c ; + for c in cc gcc c89 ; do + ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ; + if test $? = 0 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + rm -f $dummy.c $dummy.o $dummy.rel ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# ([email protected] 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + UNAME_MACHINE_ARCH=`(uname -p) 2>/dev/null` || \ + UNAME_MACHINE_ARCH=unknown + case "${UNAME_MACHINE_ARCH}" in + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit 0 ;; + amiga:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + arc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hp300:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + macppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvmeppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pmax:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mipseb-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sun3:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + wgrisc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:OpenBSD:*:*) + echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + alpha:OSF1:*:*) + if test $UNAME_RELEASE = "V4.0"; then + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + fi + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + cat <<EOF >$dummy.s + .data +\$Lformat: + .byte 37,100,45,37,120,10,0 # "%d-%x\n" + + .text + .globl main + .align 4 + .ent main +main: + .frame \$30,16,\$26,0 + ldgp \$29,0(\$27) + .prologue 1 + .long 0x47e03d80 # implver \$0 + lda \$2,-1 + .long 0x47e20c21 # amask \$2,\$1 + lda \$16,\$Lformat + mov \$0,\$17 + not \$1,\$18 + jsr \$26,printf + ldgp \$29,0(\$26) + mov 0,\$16 + jsr \$26,exit + .end main +EOF + eval $set_cc_for_build + $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null + if test "$?" = 0 ; then + case `./$dummy` in + 0-0) + UNAME_MACHINE="alpha" + ;; + 1-0) + UNAME_MACHINE="alphaev5" + ;; + 1-1) + UNAME_MACHINE="alphaev56" + ;; + 1-101) + UNAME_MACHINE="alphapca56" + ;; + 2-303) + UNAME_MACHINE="alphaev6" + ;; + 2-307) + UNAME_MACHINE="alphaev67" + ;; + 2-1307) + UNAME_MACHINE="alphaev68" + ;; + esac + fi + rm -f $dummy.s $dummy + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit 0 ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit 0 ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit 0 ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit 0;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit 0 ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit 0 ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit 0 ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit 0;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit 0;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # [email protected] (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit 0 ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit 0 ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit 0 ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit 0 ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit 0 ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit 0 ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit 0 ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit 0 ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit 0 ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit 0 ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit 0 ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit 0 ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include <stdio.h> /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD $dummy.c -o $dummy \ + && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo mips-mips-riscos${UNAME_RELEASE} + exit 0 ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit 0 ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit 0 ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit 0 ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit 0 ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit 0 ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit 0 ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit 0 ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit 0 ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit 0 ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit 0 ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit 0 ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit 0 ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <sys/systemcfg.h> + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo rs6000-ibm-aix3.2.5 + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit 0 ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit 0 ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit 0 ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit 0 ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit 0 ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit 0 ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit 0 ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit 0 ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include <stdlib.h> + #include <unistd.h> + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`./$dummy` + if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi + rm -f $dummy.c $dummy + fi ;; + esac + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit 0 ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit 0 ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <unistd.h> + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo unknown-hitachi-hiuxwe2 + exit 0 ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit 0 ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit 0 ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit 0 ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit 0 ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit 0 ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit 0 ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit 0 ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit 0 ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit 0 ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit 0 ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit 0 ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3D:*:*:*) + echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit 0 ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit 0 ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:FreeBSD:*:*) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit 0 ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit 0 ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit 0 ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit 0 ;; + x86:Interix*:3*) + echo i386-pc-interix3 + exit 0 ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i386-pc-interix + exit 0 ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit 0 ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit 0 ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + *:GNU:*:*) + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit 0 ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit 0 ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux + exit 0 ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + rm -f $dummy.c + test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0 + ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit 0 ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit 0 ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit 0 ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit 0 ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit 0 ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit 0 ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit 0 ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit 0 ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit 0 ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit 0 ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <features.h> + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #ifdef __INTEL_COMPILER + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + rm -f $dummy.c + test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 + test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit 0 ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit 0 ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit 0 ;; + i*86:*:5:[78]*) + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit 0 ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` + echo ${UNAME_MACHINE}-pc-isc$UNAME_REL + elif /bin/uname -X 2>/dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` + (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit 0 ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit 0 ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit 0 ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit 0 ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit 0 ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit 0 ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit 0 ;; + M68*:*:R3V[567]*:*) + test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; + 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4 && exit 0 ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit 0 ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit 0 ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit 0 ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says <[email protected]> + echo i586-unisys-sysv4 + exit 0 ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes <[email protected]>. + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit 0 ;; + *:*:*:FTX*) + # From [email protected]. + echo i860-stratus-sysv4 + exit 0 ;; + *:VOS:*:*) + # From [email protected]. + echo hppa1.1-stratus-vos + exit 0 ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit 0 ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit 0 ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit 0 ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit 0 ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit 0 ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit 0 ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit 0 ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Darwin:*:*) + echo `uname -p`-apple-darwin${UNAME_RELEASE} + exit 0 ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + if test "${UNAME_MACHINE}" = "x86pc"; then + UNAME_MACHINE=pc + echo i386-${UNAME_MACHINE}-nto-qnx + else + echo `uname -p`-${UNAME_MACHINE}-nto-qnx + fi + exit 0 ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit 0 ;; + NSR-[GKLNPTVW]:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit 0 ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit 0 ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit 0 ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit 0 ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit 0 ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit 0 ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit 0 ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit 0 ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit 0 ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit 0 ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit 0 ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit 0 ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit 0 ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit 0 ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c <<EOF +#ifdef _SEQUENT_ +# include <sys/types.h> +# include <sys/utsname.h> +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include <sys/param.h> + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include <sys/param.h> +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0 +rm -f $dummy.c $dummy + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit 0 ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + c34*) + echo c34-convex-bsd + exit 0 ;; + c38*) + echo c38-convex-bsd + exit 0 ;; + c4*) + echo c4-convex-bsd + exit 0 ;; + esac +fi + +cat >&2 <<EOF +$0: unable to guess system type + +This script, last modified $timestamp, has failed to recognize +the operating system you are using. It is advised that you +download the most up to date version of the config scripts from + + ftp://ftp.gnu.org/pub/gnu/config/ + +If the version you run ($0) is already up to date, please +send the following data and any information you think might be +pertinent to <[email protected]> in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/wmlongrun/config.h.in b/wmlongrun/config.h.in new file mode 100644 index 0000000..7d53193 --- /dev/null +++ b/wmlongrun/config.h.in @@ -0,0 +1,38 @@ +/* config.h.in. Generated automatically from configure.in by autoheader 2.13. */ + +/* Define if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define if the X Window System is missing or not being used. */ +#undef X_DISPLAY_MISSING + +/* use Linux specific code */ +#undef LINUX + +/* Define if you have the select function. */ +#undef HAVE_SELECT + +/* Define if you have the <fcntl.h> header file. */ +#undef HAVE_FCNTL_H + +/* Define if you have the <string.h> header file. */ +#undef HAVE_STRING_H + +/* Define if you have the <sys/time.h> header file. */ +#undef HAVE_SYS_TIME_H + +/* Define if you have the <unistd.h> header file. */ +#undef HAVE_UNISTD_H + +/* Define if you have the Xext library (-lXext). */ +#undef HAVE_LIBXEXT + +/* Define if you have the Xpm library (-lXpm). */ +#undef HAVE_LIBXPM + +/* Name of package */ +#undef PACKAGE + +/* Version number of package */ +#undef VERSION + diff --git a/wmlongrun/config.sub b/wmlongrun/config.sub new file mode 100755 index 0000000..4ac7ab2 --- /dev/null +++ b/wmlongrun/config.sub @@ -0,0 +1,1443 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002 Free Software Foundation, Inc. + +timestamp='2002-02-22' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Please send patches to <[email protected]>. Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <[email protected]>." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit 0;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | c4x | clipper \ + | d10v | d30v | dsp16xx \ + | fr30 \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | m32r | m68000 | m68k | m88k | mcore \ + | mips | mips16 | mips64 | mips64el | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el | mips64vr4300 \ + | mips64vr4300el | mips64vr5000 | mips64vr5000el \ + | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \ + | mipsisa32 \ + | mn10200 | mn10300 \ + | ns16k | ns32k \ + | openrisc | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | sh | sh[34] | sh[34]eb | shbe | shle | sh64 \ + | sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \ + | strongarm \ + | tahoe | thumb | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xscale | xstormy16 | xtensa \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armv*-* \ + | avr-* \ + | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c54x-* \ + | clipper-* | cydra-* \ + | d10v-* | d30v-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | m32r-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | mcore-* \ + | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \ + | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \ + | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* | sh64-* \ + | sparc-* | sparc64-* | sparc86x-* | sparclite-* \ + | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ + | xtensa-* \ + | ymp-* \ + | z8k-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + crds | unos) + basic_machine=m68k-crds + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + mmix*) + basic_machine=mmix-knuth + os=-mmixware + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + or32 | or32-*) + basic_machine=or32-unknown + os=-coff + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon) + basic_machine=i686-pc + ;; + pentiumii | pentium2) + basic_machine=i686-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3d) + basic_machine=alpha-cray + os=-unicos + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + windows32) + basic_machine=i386-pc + os=-windows32-msvcrt + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh3 | sh4 | sh3eb | sh4eb) + basic_machine=sh-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparc | sparcv9 | sparcv9b) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + c4x*) + basic_machine=c4x-none + os=-coff + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ + | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto*) + os=-nto-qnx + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-ibm) + os=-aix + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -vxsim* | -vxworks*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/wmlongrun/configure b/wmlongrun/configure new file mode 100755 index 0000000..f8ae7f9 --- /dev/null +++ b/wmlongrun/configure @@ -0,0 +1,2874 @@ +#! /bin/sh + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.13 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: +ac_help="$ac_help + --with-libs-from pass compiler flags to look for libraries" +ac_help="$ac_help + --with-incs-from pass compiler flags to look for header files" +ac_help="$ac_help + --with-x use the X Window System" +ac_help="$ac_help + --enable-debug enable debugging " + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} +# Maximum number of lines to put in a shell here document. +ac_max_here_lines=12 + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.13" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set these to C if already set. These must not be set unconditionally +# because not all systems understand e.g. LANG=C (notably SCO). +# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +# Non-C LC_CTYPE values break the ctype check. +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=src/main.c + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +ac_exeext= +ac_objext=o +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says [email protected]. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + +ac_aux_dir= +for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + +am__api_version="1.4" +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:566: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 +echo "configure:619: checking whether build environment is sane" >&5 +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "$*" != "X $srcdir/configure conftestfile" \ + && test "$*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { echo "configure: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" 1>&2; exit 1; } + fi + + test "$2" = conftestfile + ) +then + # Ok. + : +else + { echo "configure: error: newly created file is older than distributed files! +Check your system clock" 1>&2; exit 1; } +fi +rm -f conftest* +echo "$ac_t""yes" 1>&6 +if test "$program_transform_name" = s,x,x,; then + program_transform_name= +else + # Double any \ or $. echo might interpret backslashes. + cat <<\EOF_SED > conftestsed +s,\\,\\\\,g; s,\$,$$,g +EOF_SED + program_transform_name="`echo $program_transform_name|sed -f conftestsed`" + rm -f conftestsed +fi +test "$program_prefix" != NONE && + program_transform_name="s,^,${program_prefix},; $program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" + +# sed with no file args requires a program. +test "$program_transform_name" = "" && program_transform_name="s,x,x," + +echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 +echo "configure:676: checking whether ${MAKE-make} sets \${MAKE}" >&5 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftestmake <<\EOF +all: + @echo 'ac_maketemp="${MAKE}"' +EOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftestmake +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$ac_t""yes" 1>&6 + SET_MAKE= +else + echo "$ac_t""no" 1>&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + + +PACKAGE=wmlongrun + +VERSION=0.3.0pre1 + +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } +fi +cat >> confdefs.h <<EOF +#define PACKAGE "$PACKAGE" +EOF + +cat >> confdefs.h <<EOF +#define VERSION "$VERSION" +EOF + + + +missing_dir=`cd $ac_aux_dir && pwd` +echo $ac_n "checking for working aclocal-${am__api_version}""... $ac_c" 1>&6 +echo "configure:722: checking for working aclocal-${am__api_version}" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then + ACLOCAL=aclocal-${am__api_version} + echo "$ac_t""found" 1>&6 +else + ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 +echo "configure:735: checking for working autoconf" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoconf --version) < /dev/null > /dev/null 2>&1; then + AUTOCONF=autoconf + echo "$ac_t""found" 1>&6 +else + AUTOCONF="$missing_dir/missing autoconf" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working automake-${am__api_version}""... $ac_c" 1>&6 +echo "configure:748: checking for working automake-${am__api_version}" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then + AUTOMAKE=automake-${am__api_version} + echo "$ac_t""found" 1>&6 +else + AUTOMAKE="$missing_dir/missing automake-${am__api_version}" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 +echo "configure:761: checking for working autoheader" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoheader --version) < /dev/null > /dev/null 2>&1; then + AUTOHEADER=autoheader + echo "$ac_t""found" 1>&6 +else + AUTOHEADER="$missing_dir/missing autoheader" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 +echo "configure:774: checking for working makeinfo" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (makeinfo --version) < /dev/null > /dev/null 2>&1; then + MAKEINFO=makeinfo + echo "$ac_t""found" 1>&6 +else + MAKEINFO="$missing_dir/missing makeinfo" + echo "$ac_t""missing" 1>&6 +fi + + + + + + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:794: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:824: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:875: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:907: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +cat > conftest.$ac_ext << EOF + +#line 918 "configure" +#include "confdefs.h" + +main(){return(0);} +EOF +if { (eval echo configure:923: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + ac_cv_prog_cc_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cc_cross=no + else + ac_cv_prog_cc_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:949: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:954: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <<EOF +#ifdef __GNUC__ + yes; +#endif +EOF +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:963: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:982: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:1025: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + +echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 +echo "configure:1079: checking how to run the C preprocessor" >&5 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then +if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # This must be in double quotes, not single quotes, because CPP may get + # substituted into the Makefile and "${CC-cc}" will confuse make. + CPP="${CC-cc} -E" + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. + cat > conftest.$ac_ext <<EOF +#line 1094 "configure" +#include "confdefs.h" +#include <assert.h> +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1100: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -E -traditional-cpp" + cat > conftest.$ac_ext <<EOF +#line 1111 "configure" +#include "confdefs.h" +#include <assert.h> +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1117: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -nologo -E" + cat > conftest.$ac_ext <<EOF +#line 1128 "configure" +#include "confdefs.h" +#include <assert.h> +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1134: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP=/lib/cpp +fi +rm -f conftest* +fi +rm -f conftest* +fi +rm -f conftest* + ac_cv_prog_CPP="$CPP" +fi + CPP="$ac_cv_prog_CPP" +else + ac_cv_prog_CPP="$CPP" +fi +echo "$ac_t""$CPP" 1>&6 + +echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 +echo "configure:1159: checking for ANSI C header files" >&5 +if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1164 "configure" +#include "confdefs.h" +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <float.h> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1172: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + ac_cv_header_stdc=yes +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +cat > conftest.$ac_ext <<EOF +#line 1189 "configure" +#include "confdefs.h" +#include <string.h> +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "memchr" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +cat > conftest.$ac_ext <<EOF +#line 1207 "configure" +#include "confdefs.h" +#include <stdlib.h> +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "free" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +if test "$cross_compiling" = yes; then + : +else + cat > conftest.$ac_ext <<EOF +#line 1228 "configure" +#include "confdefs.h" +#include <ctype.h> +#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int main () { int i; for (i = 0; i < 256; i++) +if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); +exit (0); } + +EOF +if { (eval echo configure:1239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_header_stdc=no +fi +rm -fr conftest* +fi + +fi +fi + +echo "$ac_t""$ac_cv_header_stdc" 1>&6 +if test $ac_cv_header_stdc = yes; then + cat >> confdefs.h <<\EOF +#define STDC_HEADERS 1 +EOF + +fi + + +# Check whether --with-libs-from or --without-libs-from was given. +if test "${with_libs_from+set}" = set; then + withval="$with_libs_from" + lib_search_path="$withval $lib_search_path" +fi + + +# Check whether --with-incs-from or --without-incs-from was given. +if test "${with_incs_from+set}" = set; then + withval="$with_incs_from" + inc_search_path="$withval $inc_search_path" +fi + + + + +# If we find X, set shell vars x_includes and x_libraries to the +# paths, otherwise set no_x=yes. +# Uses ac_ vars as temps to allow command line to override cache and checks. +# --without-x overrides everything else, but does not touch the cache. +echo $ac_n "checking for X""... $ac_c" 1>&6 +echo "configure:1284: checking for X" >&5 + +# Check whether --with-x or --without-x was given. +if test "${with_x+set}" = set; then + withval="$with_x" + : +fi + +# $have_x is `yes', `no', `disabled', or empty when we do not yet know. +if test "x$with_x" = xno; then + # The user explicitly disabled X. + have_x=disabled +else + if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then + # Both variables are already set. + have_x=yes + else +if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # One or both of the vars are not set, and there is no cached value. +ac_x_includes=NO ac_x_libraries=NO +rm -fr conftestdir +if mkdir conftestdir; then + cd conftestdir + # Make sure to not put "make" in the Imakefile rules, since we grep it out. + cat > Imakefile <<'EOF' +acfindx: + @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' +EOF + if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then + # GNU make sometimes prints "make[1]: Entering...", which would confuse us. + eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` + # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. + for ac_extension in a so sl; do + if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && + test -f $ac_im_libdir/libX11.$ac_extension; then + ac_im_usrlibdir=$ac_im_libdir; break + fi + done + # Screen out bogus values from the imake configuration. They are + # bogus both because they are the default anyway, and because + # using them would break gcc on systems where it needs fixed includes. + case "$ac_im_incroot" in + /usr/include) ;; + *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;; + esac + case "$ac_im_usrlibdir" in + /usr/lib | /lib) ;; + *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;; + esac + fi + cd .. + rm -fr conftestdir +fi + +if test "$ac_x_includes" = NO; then + # Guess where to find include files, by looking for this one X11 .h file. + test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h + + # First, try using that file with no special directory specified. +cat > conftest.$ac_ext <<EOF +#line 1346 "configure" +#include "confdefs.h" +#include <$x_direct_test_include> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1351: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + # We can compile using X headers with no special include directory. +ac_x_includes= +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + # Look for the header file in a standard set of common directories. +# Check X11 before X11Rn because it is often a symlink to the current release. + for ac_dir in \ + /usr/X11/include \ + /usr/X11R6/include \ + /usr/X11R5/include \ + /usr/X11R4/include \ + \ + /usr/include/X11 \ + /usr/include/X11R6 \ + /usr/include/X11R5 \ + /usr/include/X11R4 \ + \ + /usr/local/X11/include \ + /usr/local/X11R6/include \ + /usr/local/X11R5/include \ + /usr/local/X11R4/include \ + \ + /usr/local/include/X11 \ + /usr/local/include/X11R6 \ + /usr/local/include/X11R5 \ + /usr/local/include/X11R4 \ + \ + /usr/X386/include \ + /usr/x386/include \ + /usr/XFree86/include/X11 \ + \ + /usr/include \ + /usr/local/include \ + /usr/unsupported/include \ + /usr/athena/include \ + /usr/local/x11r5/include \ + /usr/lpp/Xamples/include \ + \ + /usr/openwin/include \ + /usr/openwin/share/include \ + ; \ + do + if test -r "$ac_dir/$x_direct_test_include"; then + ac_x_includes=$ac_dir + break + fi + done +fi +rm -f conftest* +fi # $ac_x_includes = NO + +if test "$ac_x_libraries" = NO; then + # Check for the libraries. + + test -z "$x_direct_test_library" && x_direct_test_library=Xt + test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc + + # See if we find them without any special options. + # Don't add to $LIBS permanently. + ac_save_LIBS="$LIBS" + LIBS="-l$x_direct_test_library $LIBS" +cat > conftest.$ac_ext <<EOF +#line 1420 "configure" +#include "confdefs.h" + +int main() { +${x_direct_test_function}() +; return 0; } +EOF +if { (eval echo configure:1427: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + LIBS="$ac_save_LIBS" +# We can link X programs with no special library path. +ac_x_libraries= +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + LIBS="$ac_save_LIBS" +# First see if replacing the include by lib works. +# Check X11 before X11Rn because it is often a symlink to the current release. +for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ + /usr/X11/lib \ + /usr/X11R6/lib \ + /usr/X11R5/lib \ + /usr/X11R4/lib \ + \ + /usr/lib/X11 \ + /usr/lib/X11R6 \ + /usr/lib/X11R5 \ + /usr/lib/X11R4 \ + \ + /usr/local/X11/lib \ + /usr/local/X11R6/lib \ + /usr/local/X11R5/lib \ + /usr/local/X11R4/lib \ + \ + /usr/local/lib/X11 \ + /usr/local/lib/X11R6 \ + /usr/local/lib/X11R5 \ + /usr/local/lib/X11R4 \ + \ + /usr/X386/lib \ + /usr/x386/lib \ + /usr/XFree86/lib/X11 \ + \ + /usr/lib \ + /usr/local/lib \ + /usr/unsupported/lib \ + /usr/athena/lib \ + /usr/local/x11r5/lib \ + /usr/lpp/Xamples/lib \ + /lib/usr/lib/X11 \ + \ + /usr/openwin/lib \ + /usr/openwin/share/lib \ + ; \ +do + for ac_extension in a so sl; do + if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then + ac_x_libraries=$ac_dir + break 2 + fi + done +done +fi +rm -f conftest* +fi # $ac_x_libraries = NO + +if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then + # Didn't find X anywhere. Cache the known absence of X. + ac_cv_have_x="have_x=no" +else + # Record where we found X for the cache. + ac_cv_have_x="have_x=yes \ + ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" +fi +fi + fi + eval "$ac_cv_have_x" +fi # $with_x != no + +if test "$have_x" != yes; then + echo "$ac_t""$have_x" 1>&6 + no_x=yes +else + # If each of the values was on the command line, it overrides each guess. + test "x$x_includes" = xNONE && x_includes=$ac_x_includes + test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries + # Update the cache value to reflect the command line values. + ac_cv_have_x="have_x=yes \ + ac_x_includes=$x_includes ac_x_libraries=$x_libraries" + echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6 +fi + +if test "$no_x" = yes; then + # Not all programs may use this symbol, but it does not hurt to define it. + cat >> confdefs.h <<\EOF +#define X_DISPLAY_MISSING 1 +EOF + + X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= +else + if test -n "$x_includes"; then + X_CFLAGS="$X_CFLAGS -I$x_includes" + fi + + # It would also be nice to do this for all -L options, not just this one. + if test -n "$x_libraries"; then + X_LIBS="$X_LIBS -L$x_libraries" + # For Solaris; some versions of Sun CC require a space after -R and + # others require no space. Words are not sufficient . . . . + case "`(uname -sr) 2>/dev/null`" in + "SunOS 5"*) + echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6 +echo "configure:1533: checking whether -R must be followed by a space" >&5 + ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries" + cat > conftest.$ac_ext <<EOF +#line 1536 "configure" +#include "confdefs.h" + +int main() { + +; return 0; } +EOF +if { (eval echo configure:1543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + ac_R_nospace=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_R_nospace=no +fi +rm -f conftest* + if test $ac_R_nospace = yes; then + echo "$ac_t""no" 1>&6 + X_LIBS="$X_LIBS -R$x_libraries" + else + LIBS="$ac_xsave_LIBS -R $x_libraries" + cat > conftest.$ac_ext <<EOF +#line 1559 "configure" +#include "confdefs.h" + +int main() { + +; return 0; } +EOF +if { (eval echo configure:1566: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + ac_R_space=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_R_space=no +fi +rm -f conftest* + if test $ac_R_space = yes; then + echo "$ac_t""yes" 1>&6 + X_LIBS="$X_LIBS -R $x_libraries" + else + echo "$ac_t""neither works" 1>&6 + fi + fi + LIBS="$ac_xsave_LIBS" + esac + fi + + # Check for system-dependent libraries X programs must link with. + # Do this before checking for the system-independent R6 libraries + # (-lICE), since we may need -lsocket or whatever for X linking. + + if test "$ISC" = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" + else + # [email protected] says this is needed for Ultrix, if the X + # libraries were built with DECnet support. And [email protected] says + # the Alpha needs dnet_stub (dnet does not exist). + echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6 +echo "configure:1598: checking for dnet_ntoa in -ldnet" >&5 +ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldnet $LIBS" +cat > conftest.$ac_ext <<EOF +#line 1606 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dnet_ntoa(); + +int main() { +dnet_ntoa() +; return 0; } +EOF +if { (eval echo configure:1617: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" +else + echo "$ac_t""no" 1>&6 +fi + + if test $ac_cv_lib_dnet_dnet_ntoa = no; then + echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6 +echo "configure:1639: checking for dnet_ntoa in -ldnet_stub" >&5 +ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldnet_stub $LIBS" +cat > conftest.$ac_ext <<EOF +#line 1647 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dnet_ntoa(); + +int main() { +dnet_ntoa() +; return 0; } +EOF +if { (eval echo configure:1658: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" +else + echo "$ac_t""no" 1>&6 +fi + + fi + + # [email protected] says -lnsl (and -lsocket) are needed for his 386/AT, + # to get the SysV transport functions. + # [email protected] says the Pyramis MIS-ES running DC/OSx (SVR4) + # needs -lnsl. + # The nsl library prevents programs from opening the X display + # on Irix 5.2, according to [email protected]. + echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6 +echo "configure:1687: checking for gethostbyname" >&5 +if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1692 "configure" +#include "confdefs.h" +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char gethostbyname(); below. */ +#include <assert.h> +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gethostbyname(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) +choke me +#else +gethostbyname(); +#endif + +; return 0; } +EOF +if { (eval echo configure:1715: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_gethostbyname=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_gethostbyname=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then + echo "$ac_t""yes" 1>&6 + : +else + echo "$ac_t""no" 1>&6 +fi + + if test $ac_cv_func_gethostbyname = no; then + echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 +echo "configure:1736: checking for gethostbyname in -lnsl" >&5 +ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lnsl $LIBS" +cat > conftest.$ac_ext <<EOF +#line 1744 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gethostbyname(); + +int main() { +gethostbyname() +; return 0; } +EOF +if { (eval echo configure:1755: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" +else + echo "$ac_t""no" 1>&6 +fi + + fi + + # [email protected] says without -lsocket, + # socket/setsockopt and other routines are undefined under SCO ODT + # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary + # on later versions), says [email protected]: it contains + # gethostby* variants that don't use the nameserver (or something). + # -lsocket must be given before -lnsl if both are needed. + # We assume that if connect needs -lnsl, so does gethostbyname. + echo $ac_n "checking for connect""... $ac_c" 1>&6 +echo "configure:1785: checking for connect" >&5 +if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1790 "configure" +#include "confdefs.h" +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char connect(); below. */ +#include <assert.h> +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char connect(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_connect) || defined (__stub___connect) +choke me +#else +connect(); +#endif + +; return 0; } +EOF +if { (eval echo configure:1813: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_connect=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_connect=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then + echo "$ac_t""yes" 1>&6 + : +else + echo "$ac_t""no" 1>&6 +fi + + if test $ac_cv_func_connect = no; then + echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6 +echo "configure:1834: checking for connect in -lsocket" >&5 +ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lsocket $X_EXTRA_LIBS $LIBS" +cat > conftest.$ac_ext <<EOF +#line 1842 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char connect(); + +int main() { +connect() +; return 0; } +EOF +if { (eval echo configure:1853: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" +else + echo "$ac_t""no" 1>&6 +fi + + fi + + # [email protected] says -lposix is necessary on A/UX. + echo $ac_n "checking for remove""... $ac_c" 1>&6 +echo "configure:1877: checking for remove" >&5 +if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1882 "configure" +#include "confdefs.h" +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char remove(); below. */ +#include <assert.h> +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char remove(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_remove) || defined (__stub___remove) +choke me +#else +remove(); +#endif + +; return 0; } +EOF +if { (eval echo configure:1905: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_remove=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_remove=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then + echo "$ac_t""yes" 1>&6 + : +else + echo "$ac_t""no" 1>&6 +fi + + if test $ac_cv_func_remove = no; then + echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6 +echo "configure:1926: checking for remove in -lposix" >&5 +ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lposix $LIBS" +cat > conftest.$ac_ext <<EOF +#line 1934 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char remove(); + +int main() { +remove() +; return 0; } +EOF +if { (eval echo configure:1945: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" +else + echo "$ac_t""no" 1>&6 +fi + + fi + + # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. + echo $ac_n "checking for shmat""... $ac_c" 1>&6 +echo "configure:1969: checking for shmat" >&5 +if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1974 "configure" +#include "confdefs.h" +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shmat(); below. */ +#include <assert.h> +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shmat(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_shmat) || defined (__stub___shmat) +choke me +#else +shmat(); +#endif + +; return 0; } +EOF +if { (eval echo configure:1997: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_shmat=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_shmat=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then + echo "$ac_t""yes" 1>&6 + : +else + echo "$ac_t""no" 1>&6 +fi + + if test $ac_cv_func_shmat = no; then + echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6 +echo "configure:2018: checking for shmat in -lipc" >&5 +ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lipc $LIBS" +cat > conftest.$ac_ext <<EOF +#line 2026 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shmat(); + +int main() { +shmat() +; return 0; } +EOF +if { (eval echo configure:2037: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" +else + echo "$ac_t""no" 1>&6 +fi + + fi + fi + + # Check for libraries that X11R6 Xt/Xaw programs need. + ac_save_LDFLAGS="$LDFLAGS" + test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" + # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to + # check for ICE first), but we must link in the order -lSM -lICE or + # we get undefined symbols. So assume we have SM if we have ICE. + # These have to be linked with before -lX11, unlike the other + # libraries we check for below, so use a different variable. + # [email protected], [email protected]. + echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6 +echo "configure:2070: checking for IceConnectionNumber in -lICE" >&5 +ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lICE $X_EXTRA_LIBS $LIBS" +cat > conftest.$ac_ext <<EOF +#line 2078 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char IceConnectionNumber(); + +int main() { +IceConnectionNumber() +; return 0; } +EOF +if { (eval echo configure:2089: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" +else + echo "$ac_t""no" 1>&6 +fi + + LDFLAGS="$ac_save_LDFLAGS" + +fi + + +X_LIBRARY_PATH=$x_libraries + +XCFLAGS="$X_CFLAGS" + +XLFLAGS="$X_LIBS" + +XLIBS="-lX11 $X_EXTRA_LIBS" + + +lib_search_path="$lib_search_path $XLFLAGS -L/usr/local/lib" +inc_search_path="$inc_search_path $XCFLAGS -I/usr/local/include" + + + +echo $ac_n "checking for XShapeCombineMask in -lXext""... $ac_c" 1>&6 +echo "configure:2129: checking for XShapeCombineMask in -lXext" >&5 +ac_lib_var=`echo Xext'_'XShapeCombineMask | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lXext $X_LIBS $X_EXTRA_LIBS -lX11 $LIBS" +cat > conftest.$ac_ext <<EOF +#line 2137 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char XShapeCombineMask(); + +int main() { +XShapeCombineMask() +; return 0; } +EOF +if { (eval echo configure:2148: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_lib=HAVE_LIB`echo Xext | sed -e 's/[^a-zA-Z0-9_]/_/g' \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` + cat >> confdefs.h <<EOF +#define $ac_tr_lib 1 +EOF + + LIBS="-lXext $LIBS" + +else + echo "$ac_t""no" 1>&6 +echo "The shape extension stuff could not be found in the X client + libraries" + exit 1 +fi + + +echo $ac_n "checking for XpmCreatePixmapFromData in -lXpm""... $ac_c" 1>&6 +echo "configure:2180: checking for XpmCreatePixmapFromData in -lXpm" >&5 +ac_lib_var=`echo Xpm'_'XpmCreatePixmapFromData | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lXpm $X_LIBS $X_EXTRA_LIBS -lX11 $LIBS" +cat > conftest.$ac_ext <<EOF +#line 2188 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char XpmCreatePixmapFromData(); + +int main() { +XpmCreatePixmapFromData() +; return 0; } +EOF +if { (eval echo configure:2199: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_lib=HAVE_LIB`echo Xpm | sed -e 's/[^a-zA-Z0-9_]/_/g' \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` + cat >> confdefs.h <<EOF +#define $ac_tr_lib 1 +EOF + + LIBS="-lXpm $LIBS" + +else + echo "$ac_t""no" 1>&6 +echo "The libXpm library was not found, but is necessary to build this + library" + exit 1 +fi + + + + + + + + + +# Check whether --enable-debug or --disable-debug was given. +if test "${enable_debug+set}" = set; then + enableval="$enable_debug" + : +else + enable_debug=no +fi + +if test "$enable_debug" = yes; then + DFLAGS="-Wall -g -ansi -pedantic" +fi + + + + +# Make sure we can run config.sub. +if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi + +echo $ac_n "checking host system type""... $ac_c" 1>&6 +echo "configure:2258: checking host system type" >&5 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + + +arch="" +case ${host_os} in +linux*) + SETUID_FLAGS="-m 4755 -o root -g root" + OS=linux + cat >> confdefs.h <<\EOF +#define LINUX 1 +EOF + + ;; +freebsd*) + OS=freebsd + ;; +*) + echo "" + echo "${host_os} is NOT supported" + echo "" + exit 1 + ;; +esac + + + + + + + +LIBRARY_SEARCH_PATH="$lib_search_path" +HEADER_SEARCH_PATH="$inc_search_path" + + + + + +for ac_hdr in fcntl.h sys/time.h unistd.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:2317: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2322 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2327: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +for ac_hdr in string.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:2357: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2362 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2367: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +for ac_hdr in strings.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:2394: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2399 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2404: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +fi +done + + +for ac_func in select +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:2437: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2442 "configure" +#include "confdefs.h" +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func(); below. */ +#include <assert.h> +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:2465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <<EOF +#define $ac_tr_func 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + + + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +DEFS=-DHAVE_CONFIG_H + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS <<EOF +#! /bin/sh +# Generated automatically by configure. +# Run this file to recreate the current configuration. +# This directory was configured as follows, +# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.13" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir +ac_given_INSTALL="$INSTALL" + +trap 'rm -fr `echo "Makefile src/Makefile doc/Makefile config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS <<EOF + +# Protect against being on the right side of a sed subst in config.status. +sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; + s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@SHELL@%$SHELL%g +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g +s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g +s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@PACKAGE@%$PACKAGE%g +s%@VERSION@%$VERSION%g +s%@ACLOCAL@%$ACLOCAL%g +s%@AUTOCONF@%$AUTOCONF%g +s%@AUTOMAKE@%$AUTOMAKE%g +s%@AUTOHEADER@%$AUTOHEADER%g +s%@MAKEINFO@%$MAKEINFO%g +s%@SET_MAKE@%$SET_MAKE%g +s%@CC@%$CC%g +s%@CPP@%$CPP%g +s%@X_CFLAGS@%$X_CFLAGS%g +s%@X_PRE_LIBS@%$X_PRE_LIBS%g +s%@X_LIBS@%$X_LIBS%g +s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g +s%@X_LIBRARY_PATH@%$X_LIBRARY_PATH%g +s%@XCFLAGS@%$XCFLAGS%g +s%@XLFLAGS@%$XLFLAGS%g +s%@XLIBS@%$XLIBS%g +s%@DFLAGS@%$DFLAGS%g +s%@host@%$host%g +s%@host_alias@%$host_alias%g +s%@host_cpu@%$host_cpu%g +s%@host_vendor@%$host_vendor%g +s%@host_os@%$host_os%g +s%@OS@%$OS%g +s%@SETUID_FLAGS@%$SETUID_FLAGS%g +s%@LIBRARY_SEARCH_PATH@%$LIBRARY_SEARCH_PATH%g +s%@HEADER_SEARCH_PATH@%$HEADER_SEARCH_PATH%g + +CEOF +EOF + +cat >> $CONFIG_STATUS <<\EOF + +# Split the substitutions into bite-sized pieces for seds with +# small command number limits, like on Digital OSF/1 and HP-UX. +ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. +ac_file=1 # Number of current file. +ac_beg=1 # First line for current file. +ac_end=$ac_max_sed_cmds # Line after last line for current file. +ac_more_lines=: +ac_sed_cmds="" +while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file + else + sed "${ac_end}q" conftest.subs > conftest.s$ac_file + fi + if test ! -s conftest.s$ac_file; then + ac_more_lines=false + rm -f conftest.s$ac_file + else + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f conftest.s$ac_file" + else + ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + fi + ac_file=`expr $ac_file + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_cmds` + fi +done +if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat +fi +EOF + +cat >> $CONFIG_STATUS <<EOF + +CONFIG_FILES=\${CONFIG_FILES-"Makefile src/Makefile doc/Makefile"} +EOF +cat >> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + case "$ac_given_INSTALL" in + [/$]*) INSTALL="$ac_given_INSTALL" ;; + *) INSTALL="$ac_dots$ac_given_INSTALL" ;; + esac + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +s%@INSTALL@%$INSTALL%g +" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +fi; done +rm -f conftest.s* + +# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +# NAME is the cpp macro being defined and VALUE is the value it is being given. +# +# ac_d sets the value in "#define NAME VALUE" lines. +ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' +ac_dC='\3' +ac_dD='%g' +# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". +ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='\([ ]\)%\1#\2define\3' +ac_uC=' ' +ac_uD='\4%g' +# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_eB='$%\1#\2define\3' +ac_eC=' ' +ac_eD='%g' + +if test "${CONFIG_HEADERS+set}" != set; then +EOF +cat >> $CONFIG_STATUS <<EOF + CONFIG_HEADERS="config.h" +EOF +cat >> $CONFIG_STATUS <<\EOF +fi +for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + echo creating $ac_file + + rm -f conftest.frag conftest.in conftest.out + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + cat $ac_file_inputs > conftest.in + +EOF + +# Transform confdefs.h into a sed script conftest.vals that substitutes +# the proper values into config.h.in to produce config.h. And first: +# Protect against being on the right side of a sed subst in config.status. +# Protect against being in an unquoted here document in config.status. +rm -f conftest.vals +cat > conftest.hdr <<\EOF +s/[\\&%]/\\&/g +s%[\\$`]%\\&%g +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp +s%ac_d%ac_u%gp +s%ac_u%ac_e%gp +EOF +sed -n -f conftest.hdr confdefs.h > conftest.vals +rm -f conftest.hdr + +# This sed command replaces #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +cat >> conftest.vals <<\EOF +s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% +EOF + +# Break up conftest.vals because some shells have a limit on +# the size of here documents, and old seds have small limits too. + +rm -f conftest.tail +while : +do + ac_lines=`grep -c . conftest.vals` + # grep -c gives empty output for an empty file on some AIX systems. + if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi + # Write a limited-size here document to conftest.frag. + echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS + echo 'CEOF + sed -f conftest.frag conftest.in > conftest.out + rm -f conftest.in + mv conftest.out conftest.in +' >> $CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail + rm -f conftest.vals + mv conftest.tail conftest.vals +done +rm -f conftest.vals + +cat >> $CONFIG_STATUS <<\EOF + rm -f conftest.frag conftest.h + echo "/* $ac_file. Generated automatically by configure. */" > conftest.h + cat conftest.in >> conftest.h + rm -f conftest.in + if cmp -s $ac_file conftest.h 2>/dev/null; then + echo "$ac_file is unchanged" + rm -f conftest.h + else + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + fi + rm -f $ac_file + mv conftest.h $ac_file + fi +fi; done + +EOF +cat >> $CONFIG_STATUS <<EOF + + +EOF +cat >> $CONFIG_STATUS <<\EOF +test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + diff --git a/wmlongrun/configure.in b/wmlongrun/configure.in new file mode 100644 index 0000000..53c2fb4 --- /dev/null +++ b/wmlongrun/configure.in @@ -0,0 +1,129 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(src/main.c) + +AM_INIT_AUTOMAKE(wmlongrun, 0.3.0pre1) +AM_CONFIG_HEADER(config.h) + +dnl Checks for programs. +AC_PROG_CC +AC_PROG_INSTALL + +dnl Checks for header files. +AC_HEADER_STDC + +dnl +dnl Specify paths to look for libraries and headers +dnl =============================================== +AC_ARG_WITH(libs-from, + [ --with-libs-from pass compiler flags to look for libraries], + [lib_search_path="$withval $lib_search_path"]) + +AC_ARG_WITH(incs-from, + [ --with-incs-from pass compiler flags to look for header files], + [inc_search_path="$withval $inc_search_path"]) + + +dnl =========================================== +dnl Stuff that uses X +dnl =========================================== + +AC_PATH_XTRA + +X_LIBRARY_PATH=$x_libraries + +XCFLAGS="$X_CFLAGS" + +XLFLAGS="$X_LIBS" + +XLIBS="-lX11 $X_EXTRA_LIBS" + + +lib_search_path="$lib_search_path $XLFLAGS -L/usr/local/lib" +inc_search_path="$inc_search_path $XCFLAGS -I/usr/local/include" + +AC_SUBST(X_LIBRARY_PATH) + +AC_CHECK_LIB(Xext, XShapeCombineMask,, + [echo "The shape extension stuff could not be found in the X client + libraries" + exit 1], + $X_LIBS $X_EXTRA_LIBS -lX11) + +AC_CHECK_LIB(Xpm, XpmCreatePixmapFromData,, + [echo "The libXpm library was not found, but is necessary to build this + library" + exit 1], + $X_LIBS $X_EXTRA_LIBS -lX11) + +AC_SUBST(XCFLAGS) +AC_SUBST(XLFLAGS) +AC_SUBST(XLIBS) + +AC_SUBST(X_EXTRA_LIBS) + +dnl =============================================== +dnl End of stuff that uses X +dnl =============================================== + +dnl ========= +dnl Debugging +dnl ========= +AC_ARG_ENABLE(debug, + [ --enable-debug enable debugging ],,enable_debug=no) +if test "$enable_debug" = yes; then + DFLAGS="-Wall -g -ansi -pedantic" +fi +AC_SUBST(DFLAGS) + +dnl ============ +dnl Check for OS +dnl ============ + +AC_CANONICAL_HOST + +arch="" +case ${host_os} in +linux*) + SETUID_FLAGS="-m 4755 -o root -g root" + OS=linux + AC_DEFINE(LINUX) + ;; +freebsd*) + OS=freebsd +dnl AC_DEFINE(FREEBSD) + ;; +*) + echo "" + echo "${host_os} is NOT supported" + echo "" + exit 1 + ;; +esac + +AC_SUBST(OS) +AC_SUBST(SETUID_FLAGS) +AC_SUBST(LIBS) + + +dnl ============================= +dnl Checks for library functions. +dnl ============================= + +LIBRARY_SEARCH_PATH="$lib_search_path" +HEADER_SEARCH_PATH="$inc_search_path" + +AC_SUBST(LIBRARY_SEARCH_PATH) +AC_SUBST(HEADER_SEARCH_PATH) + + +dnl Checks for header files. +AC_CHECK_HEADERS(fcntl.h sys/time.h unistd.h) +AC_CHECK_HEADERS(string.h,, [ +AC_CHECK_HEADERS(strings.h,,)]) + +dnl Checks for typedefs, structures, and compiler characteristics. +AC_CHECK_FUNCS(select) + +dnl Checks for library functions. + +AC_OUTPUT(Makefile src/Makefile doc/Makefile) diff --git a/wmlongrun/doc/Makefile.am b/wmlongrun/doc/Makefile.am new file mode 100644 index 0000000..ea80591 --- /dev/null +++ b/wmlongrun/doc/Makefile.am @@ -0,0 +1,5 @@ + +man_MANS = wmlongrun.1 + +EXTRA_DIST = $(man_MANS) + diff --git a/wmlongrun/doc/Makefile.in b/wmlongrun/doc/Makefile.in new file mode 100644 index 0000000..b34200a --- /dev/null +++ b/wmlongrun/doc/Makefile.in @@ -0,0 +1,226 @@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = .. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ +CC = @CC@ +DFLAGS = @DFLAGS@ +HEADER_SEARCH_PATH = @HEADER_SEARCH_PATH@ +LIBRARY_SEARCH_PATH = @LIBRARY_SEARCH_PATH@ +LIBS = @LIBS@ +MAKEINFO = @MAKEINFO@ +OS = @OS@ +PACKAGE = @PACKAGE@ +SETUID_FLAGS = @SETUID_FLAGS@ +VERSION = @VERSION@ +XCFLAGS = @XCFLAGS@ +XLFLAGS = @XLFLAGS@ +XLIBS = @XLIBS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBRARY_PATH = @X_LIBRARY_PATH@ + +man_MANS = wmlongrun.1 + +EXTRA_DIST = $(man_MANS) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = ../config.h +CONFIG_CLEAN_FILES = +man1dir = $(mandir)/man1 +MANS = $(man_MANS) + +NROFF = nroff +DIST_COMMON = Makefile.am Makefile.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps doc/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +install-man1: + $(mkinstalldirs) $(DESTDIR)$(man1dir) + @list='$(man1_MANS)'; \ + l2='$(man_MANS)'; for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ + else file=$$i; fi; \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ + $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ + done + +uninstall-man1: + @list='$(man1_MANS)'; \ + l2='$(man_MANS)'; for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ + rm -f $(DESTDIR)$(man1dir)/$$inst; \ + done +install-man: $(MANS) + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-man1 +uninstall-man: + @$(NORMAL_UNINSTALL) + $(MAKE) $(AM_MAKEFLAGS) uninstall-man1 +tags: TAGS +TAGS: + + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = doc + +distdir: $(DISTFILES) + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: +install-exec: install-exec-am + +install-data-am: install-man +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: uninstall-man +uninstall: uninstall-am +all-am: Makefile $(MANS) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(mandir)/man1 + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-generic mostlyclean-am + +clean: clean-am + +distclean-am: distclean-generic clean-am + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: install-man1 uninstall-man1 install-man uninstall-man tags \ +distdir info-am info dvi-am dvi check check-am installcheck-am \ +installcheck install-exec-am install-exec install-data-am install-data \ +install-am install uninstall-am uninstall all-redirect all-am all \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/wmlongrun/doc/wmlongrun.1 b/wmlongrun/doc/wmlongrun.1 new file mode 100644 index 0000000..d912ca7 --- /dev/null +++ b/wmlongrun/doc/wmlongrun.1 @@ -0,0 +1,82 @@ +.\" Hey, EMACS: -*- nroff -*- +.\" First parameter, NAME, should be all caps +.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection +.\" other parameters are allowed: see man(7), man(1) +.TH WMLONGRUN 1 "March 13, 2002" +.\" Please adjust this date whenever revising the manpage. +.\" +.\" Some roff macros, for reference: +.\" .nh disable hyphenation +.\" .hy enable hyphenation +.\" .ad l left justify +.\" .ad b justify to both left and right margins +.\" .nf disable filling +.\" .fi enable filling +.\" .br insert line break +.\" .sp <n> insert n+1 empty lines +.\" for manpage-specific macros, see man(7) +.SH NAME +wmlongrun \- A dockapp to monitor the LongRun(tm) status on Crusoe(tm) +processors. +.SH SYNOPSIS +.B wmlongrun [options] +.SH DESCRIPTION +This manual page documents briefly the +.B wmlongrun +command. +.PP +.\" TeX users may be more comfortable with the \fB<whatever>\fP and +.\" \fI<whatever>\fP escape sequences to invode bold face and italics, +.\" respectively. +\fBWMLongRun\fP is a program to monitor for LongRun(tm). It displays the current +LongRun(tm) settings and status: the frequency, the LongRun(tm) flags +(performance or economy), and the performance level (expressed as a percentile). + +It is a dockapp (dockable application) that is supported by X window managers +such as Window Maker, AfterStep, BlackBox, and Enlightenment. It has two user +interfaces: an LCD look-alike user interface and an LED-interface. If you +select the LCD-interfaces, the back-light may be turned on/off by clicking the +mouse button over the application. + +.SH OPTIONS +This program follows the usual GNU command line syntax, with long options +starting with two dashes (`\-'). A summary of options is included below. +.TP +.B \-d, \-\-display <string> +Attempt to open a window on the named X display. In the absence of this option, +the display specified by the +.B DISPLAY +environment variable is used. +.TP +.B \-bl, \-\-backlight +turn on back-light. +.TP +.B \-lc, \-\-light-color <color> +back-light color. (rgb:6E/C6/3B is default) +.TP +.B \-i, \-\-interval <number> +number of secs between updates. (1 is default) +.TP +.B \-cd, \-\-cpuid\-device <device> +specify Linux CPUID device ('/dev/cpu/0/cpuid' is default) +.TP +.B \-md, \-\-msr\-device <device> +specify Linux MSR device ('/dev/cpu/0/msr' is default) +.TP +.B \-l, \-\-led +run the application with LED interface +.TP +.B \-h, \-\-help +show help text and exit. +.TP +.B \-v, \-\-version +show program version and exit. +.TP +.B \-w, \-\-windowed +run the application in windowed mode +.TP +.B \-bw, \-\-broken\-wm +activate broken window manager fix + +.SH AUTHOR +Seiichi SATO <[email protected]>. diff --git a/wmlongrun/install-sh b/wmlongrun/install-sh new file mode 100755 index 0000000..c122ef9 --- /dev/null +++ b/wmlongrun/install-sh @@ -0,0 +1,251 @@ +#!/bin/sh +# +# install - install a program, script, or datafile +# This comes from X11R5 (mit/util/scripts/install.sh). +# +# Copyright 1991 by the Massachusetts Institute of Technology +# +# Permission to use, copy, modify, distribute, and sell this software and its +# documentation for any purpose is hereby granted without fee, provided that +# the above copyright notice appear in all copies and that both that +# copyright notice and this permission notice appear in supporting +# documentation, and that the name of M.I.T. not be used in advertising or +# publicity pertaining to distribution of the software without specific, +# written prior permission. M.I.T. makes no representations about the +# suitability of this software for any purpose. It is provided "as is" +# without express or implied warranty. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +transformbasename="" +transform_arg="" +instcmd="$mvprog" +chmodcmd="$chmodprog 0755" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" +dir_arg="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd="$cpprog" + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac +done + +if [ x"$src" = x ] +then + echo "install: no input file specified" + exit 1 +else + true +fi + +if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d $dst ]; then + instcmd=: + chmodcmd="" + else + instcmd=mkdir + fi +else + +# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f $src -o -d $src ] + then + true + else + echo "install: $src does not exist" + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "install: no destination specified" + exit 1 + else + true + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + + if [ -d $dst ] + then + dst="$dst"/`basename $src` + else + true + fi +fi + +## this sed command emulates the dirname command +dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script + +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' +' +IFS="${IFS-${defaultIFS}}" + +oIFS="${IFS}" +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS="${oIFS}" + +pathcomp='' + +while [ $# -ne 0 ] ; do + pathcomp="${pathcomp}${1}" + shift + + if [ ! -d "${pathcomp}" ] ; + then + $mkdirprog "${pathcomp}" + else + true + fi + + pathcomp="${pathcomp}/" +done +fi + +if [ x"$dir_arg" != x ] +then + $doit $instcmd $dst && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi +else + +# If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename $dst` + else + dstfile=`basename $dst $transformbasename | + sed $transformarg`$transformbasename + fi + +# don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename $dst` + else + true + fi + +# Make a temp file name in the proper directory. + + dsttmp=$dstdir/#inst.$$# + +# Move or copy the file name to the temp name + + $doit $instcmd $src $dsttmp && + + trap "rm -f ${dsttmp}" 0 && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && + +# Now rename the file to the real destination. + + $doit $rmcmd -f $dstdir/$dstfile && + $doit $mvcmd $dsttmp $dstdir/$dstfile + +fi && + + +exit 0 diff --git a/wmlongrun/missing b/wmlongrun/missing new file mode 100755 index 0000000..22e101a --- /dev/null +++ b/wmlongrun/missing @@ -0,0 +1,198 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. +# Copyright (C) 1996, 1997, 2001, 2002 Free Software Foundation, Inc. +# Franc,ois Pinard <[email protected]>, 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.in; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +case "$1" in + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + yacc create \`y.tab.[ch]', if possible, from existing .[ch]" + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing - GNU libit 0.0" + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`acinclude.m4' or \`$configure_ac'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`$configure_ac'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`acconfig.h' or \`$configure_ac'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' $configure_ac` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case "$f" in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`$configure_ac'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + bison|yacc) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if [ ! -f y.tab.h ]; then + echo >y.tab.h + fi + if [ ! -f y.tab.c ]; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex|flex) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if [ ! -f lex.yy.c ]; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + makeinfo) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` + fi + touch $file + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and you do not seem to have it handy on your + system. You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequirements for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 diff --git a/wmlongrun/mkinstalldirs b/wmlongrun/mkinstalldirs new file mode 100755 index 0000000..4f58503 --- /dev/null +++ b/wmlongrun/mkinstalldirs @@ -0,0 +1,40 @@ +#! /bin/sh +# mkinstalldirs --- make directory hierarchy +# Author: Noah Friedman <[email protected]> +# Created: 1993-05-16 +# Public domain + +# $Id: mkinstalldirs,v 1.13 1999/01/05 03:18:55 bje Exp $ + +errstatus=0 + +for file +do + set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` + shift + + pathcomp= + for d + do + pathcomp="$pathcomp$d" + case "$pathcomp" in + -* ) pathcomp=./$pathcomp ;; + esac + + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" + + mkdir "$pathcomp" || lasterr=$? + + if test ! -d "$pathcomp"; then + errstatus=$lasterr + fi + fi + + pathcomp="$pathcomp/" + done +done + +exit $errstatus + +# mkinstalldirs ends here diff --git a/wmlongrun/src/Makefile.am b/wmlongrun/src/Makefile.am new file mode 100644 index 0000000..4719d4f --- /dev/null +++ b/wmlongrun/src/Makefile.am @@ -0,0 +1,33 @@ +bin_PROGRAMS = wmlongrun + +wmlongrun_SOURCES = \ + longrun_@[email protected] \ + longrun.h \ + main.c \ + dockapp.c \ + dockapp.h \ + common.h \ + backdrop_off.xpm \ + backdrop_on.xpm \ + backdrop_led.xpm \ + parts.xpm + +EXTRA_wmlongrun_SOURCES = \ + longrun_linux.c \ + longrun_freebsd.c + +CPPFLAGS = \ + @CPPFLAGS@ \ + @DFLAGS@ + +INCLUDES = \ + @HEADER_SEARCH_PATH@ + +wmlongrun_LDADD = \ + @LIBRARY_SEARCH_PATH@ \ + @XLIBS@ + +INSTALL_PROGRAM = \ + @INSTALL_PROGRAM@ \ + @SETUID_FLAGS@ \ + $(AM_INSTALL_PROGRAM_FLAGS) diff --git a/wmlongrun/src/Makefile.in b/wmlongrun/src/Makefile.in new file mode 100644 index 0000000..03df266 --- /dev/null +++ b/wmlongrun/src/Makefile.in @@ -0,0 +1,300 @@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = .. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ +CC = @CC@ +DFLAGS = @DFLAGS@ +HEADER_SEARCH_PATH = @HEADER_SEARCH_PATH@ +LIBRARY_SEARCH_PATH = @LIBRARY_SEARCH_PATH@ +LIBS = @LIBS@ +MAKEINFO = @MAKEINFO@ +OS = @OS@ +PACKAGE = @PACKAGE@ +SETUID_FLAGS = @SETUID_FLAGS@ +VERSION = @VERSION@ +XCFLAGS = @XCFLAGS@ +XLFLAGS = @XLFLAGS@ +XLIBS = @XLIBS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBRARY_PATH = @X_LIBRARY_PATH@ + +bin_PROGRAMS = wmlongrun + +wmlongrun_SOURCES = longrun_@[email protected] longrun.h main.c dockapp.c dockapp.h common.h backdrop_off.xpm backdrop_on.xpm backdrop_led.xpm parts.xpm + + +EXTRA_wmlongrun_SOURCES = longrun_linux.c longrun_freebsd.c + + +CPPFLAGS = @CPPFLAGS@ @DFLAGS@ + + +INCLUDES = @HEADER_SEARCH_PATH@ + + +wmlongrun_LDADD = @LIBRARY_SEARCH_PATH@ @XLIBS@ + + +INSTALL_PROGRAM = @INSTALL_PROGRAM@ @SETUID_FLAGS@ $(AM_INSTALL_PROGRAM_FLAGS) + +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = ../config.h +CONFIG_CLEAN_FILES = +PROGRAMS = $(bin_PROGRAMS) + + +DEFS = @DEFS@ -I. -I$(srcdir) -I.. +LDFLAGS = @LDFLAGS@ +X_CFLAGS = @X_CFLAGS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +wmlongrun_OBJECTS = longrun_@[email protected] main.o dockapp.o +wmlongrun_DEPENDENCIES = +wmlongrun_LDFLAGS = +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +SOURCES = $(wmlongrun_SOURCES) $(EXTRA_wmlongrun_SOURCES) +OBJECTS = $(wmlongrun_OBJECTS) + +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .o .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +mostlyclean-binPROGRAMS: + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + +distclean-binPROGRAMS: + +maintainer-clean-binPROGRAMS: + +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(bindir) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ + $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + else :; fi; \ + done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + list='$(bin_PROGRAMS)'; for p in $$list; do \ + rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ + done + +.c.o: + $(COMPILE) -c $< + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +wmlongrun: $(wmlongrun_OBJECTS) $(wmlongrun_DEPENDENCIES) + @rm -f wmlongrun + $(LINK) $(wmlongrun_LDFLAGS) $(wmlongrun_OBJECTS) $(wmlongrun_LDADD) $(LIBS) + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) + +subdir = src + +distdir: $(DISTFILES) + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: all-am +check: check-am +installcheck-am: +installcheck: installcheck-am +install-exec-am: install-binPROGRAMS +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: uninstall-binPROGRAMS +uninstall: uninstall-am +all-am: Makefile $(PROGRAMS) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + $(mkinstalldirs) $(DESTDIR)$(bindir) + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \ + mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-binPROGRAMS clean-compile clean-tags clean-generic \ + mostlyclean-am + +clean: clean-am + +distclean-am: distclean-binPROGRAMS distclean-compile distclean-tags \ + distclean-generic clean-am + +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-binPROGRAMS \ + maintainer-clean-compile maintainer-clean-tags \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + +.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ +maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile tags mostlyclean-tags distclean-tags \ +clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ +check-am installcheck-am installcheck install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/wmlongrun/src/backdrop_led.xpm b/wmlongrun/src/backdrop_led.xpm new file mode 100644 index 0000000..54c57ab --- /dev/null +++ b/wmlongrun/src/backdrop_led.xpm @@ -0,0 +1,125 @@ +/* XPM */ +static char * backdrop_led_xpm[] = { +"58 58 64 1", +" c None", +". c #000000", +"+ c #646464", +"@ c #202020", +"# c #C7C7C7", +"$ c #004941", +"% c #188A86", +"& c #20B2AE", +"* c #273B00", +"= c #293B00", +"- c #2A3A00", +"; c #2B3A00", +"> c #2C3900", +", c #2D3800", +"' c #2E3800", +") c #2F3700", +"! c #303600", +"~ c #313600", +"{ c #323500", +"] c #333400", +"^ c #343400", +"/ c #353300", +"( c #363200", +"_ c #373200", +": c #383100", +"< c #393000", +"[ c #3A3000", +"} c #3B2F00", +"| c #3C2E00", +"1 c #3D2E00", +"2 c #3E2D00", +"3 c #3F2C00", +"4 c #402C00", +"5 c #412B00", +"6 c #422A00", +"7 c #432A00", +"8 c #452900", +"9 c #462900", +"0 c #472800", +"a c #482700", +"b c #492700", +"c c #4A2600", +"d c #4B2500", +"e c #4C2500", +"f c #4D2400", +"g c #4E2300", +"h c #4F2300", +"i c #502200", +"j c #512100", +"k c #522100", +"l c #532000", +"m c #541F00", +"n c #551F00", +"o c #561E00", +"p c #571D00", +"q c #581D00", +"r c #591C00", +"s c #5A1B00", +"t c #5B1B00", +"u c #5C1A00", +"v c #5D1900", +"w c #5E1900", +"x c #5F1800", +"y c #601700", +".........................................................+", +".@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@.#", +".@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#", +".@@@@$$$$$$$$$$$$$$$$$$$$@@@@@@@$$$$$$$$$$$$$$$$$$$$@@@@@#", +".@@@$$$$$$$$$$$$$$$$$$$$$$@@@@@$$$$$$$$$$$$$$$$$$$$$$@@@@#", +".@@$$$@@@@$$$@@@@$$$@@@@$$$@@@$$@@@@@$$$@@@@$$@$@@@$$$@@@#", +".@@$$@@$$@@$@@$$@@$@@$$@@$$@@@$$@@$$@@$@@$$@@$@@@$@@$$@@@#", +".@@$$@@$$@@$@@$$$$$@@$$@@$$@@@$$@@$$@@$@@$$@@$@@$$@@$$@@@#", +".@@$$@@@@@@$@@$$$$$@@$$@@$$@@@$$@@$$@@$@@@@@@$@@$$$$$$@@@#", +".@@$$@@$$$$$@@$$$$$@@$$@@$$@@@$$@@@@@$$@@$$$$$@@$$$$$$@@@#", +".@@$$@@$$$$$@@$$@@$@@$$@@$$@@@$$@@$$$$$@@$$$$$@@$$$$$$@@@#", +".@@$$$@@@@@$$@@@@$$$@@@@$$$@@@$$@@$$$$$$@@@@@$@@$$$$$$@@@#", +".@@@$$$$$$$$$$$$$$$$$$$$$$@@@@@$$$$$$$$$$$$$$$$$$$$$$@@@@#", +".@@@@$$$$$$$$$$$$$$$$$$$$@@@@@@@$$$$$$$$$$$$$$$$$$$$@@@@@#", +".@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#", +".@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#", +"+#########################################################", +" ", +" ", +".........................................................+", +".@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#", +".@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#", +".@@@@$$$$$@@@@$$$$$@@@@$$$$$@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#", +".@@@$@@@@@$@@$@@@@@$@@$@@@@@$@@@@@@@@@@@@@@@@@@@@@@@@@@@@#", +".@@@$@@@@@$@@$@@@@@$@@$@@@@@$@@@@@@@@@@@@@@@@@@@@@@@@@@@@#", +".@@@$@@@@@$@@$@@@@@$@@$@@@@@$@@@@@@@@@@@@@@@@@@@@@@@@@@@@#", +".@@@$@@@@@$@@$@@@@@$@@$@@@@@$@@%$$$$$%@@%$$$$%@@$$$$@@@@@#", +".@@@$@@@@@$@@$@@@@@$@@$@@@@@$@@&@@@@@&@@&@@@@&@$@@@@$@@@@#", +".@@@@$$$$$@@@@$$$$$@@@@$$$$$@@@&&@@@&&@@&@@@@&@$@@@@$@@@@#", +".@@@$@@@@@$@@$@@@@@$@@$@@@@@$@@&@&@&@&@@&@@@@&@$@@@@$@@@@#", +".@@@$@@@@@$@@$@@@@@$@@$@@@@@$@@&@@&@@&@@%&&&&%@%&&&&%@@@@#", +".@@@$@@@@@$@@$@@@@@$@@$@@@@@$@@%$$&$$%@@%@@@@%@$@@&@$@@@@#", +".@@@$@@@@@$@@$@@@@@$@@$@@@@@$@@&@@@@@&@@&@@@@&@$@&@@$@@@@#", +".@@@$@@@@@$@@$@@@@@$@@$@@@@@$@@&@@@@@&@@&@@@@&@$&@@@$@@@@#", +".@@@@$$$$$@@@@$$$$$@@@@$$$$$@@@&$$$$$&@@%$$$$%@%&&&&%@@@@#", +".@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#", +".@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#", +"+#########################################################", +" ", +" ", +".........................................................+", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +".*=-;>,')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxy#", +"+#########################################################"}; diff --git a/wmlongrun/src/backdrop_off.xpm b/wmlongrun/src/backdrop_off.xpm new file mode 100644 index 0000000..7ecba43 --- /dev/null +++ b/wmlongrun/src/backdrop_off.xpm @@ -0,0 +1,71 @@ +/* XPM */ +static char * backdrop_off_xpm[] = { +"58 58 10 1", +" c None", +". c #020202", +"+ c #0A0A0A", +"@ c #484C46", +"# c #DEDEDE", +"$ c #7C827C", +"% c #8E968A", +"& c #767C6F", +"* c #3E463E", +"= c #5E665A", +" ...................................................... ", +" .++++++++++++++++++++++++++++++++++++++++++++++++++++++. ", +".++@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@.#", +".+@@$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$.#", +".+@$$%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%.#", +".+@$%%%&&&&&&&&&&&&&&&&&&&&%%%%%%&&&&&&&&&&&&&&&&&&&&%%%.#", +".+@$%%&&&&&&&&&&&&&&&&&&&&&&%%%%&&&&&&&&&&&&&&&&&&&&&&%%.#", +".+@$%&&&%%%%&&&%%%%&&&%%%%&&&%%&&%%%%%&&&%%%%&&%&%%%&&&%.#", +".+@$%&&%%&&%%&%%&&%%&%%&&%%&&%%&&%%&&%%&%%&&%%&%%%&%%&&%.#", +".+@$%&&%%&&%%&%%&&&&&%%&&%%&&%%&&%%&&%%&%%&&%%&%%&&%%&&%.#", +".+@$%&&%%%%%%&%%&&&&&%%&&%%&&%%&&%%&&%%&%%%%%%&%%&&&&&&%.#", +".+@$%&&%%&&&&&%%&&&&&%%&&%%&&%%&&%%%%%&&%%&&&&&%%&&&&&&%.#", +".+@$%&&%%&&&&&%%&&%%&%%&&%%&&%%&&%%&&&&&%%&&&&&%%&&&&&&%.#", +".+@$%&&&%%%%%&&%%%%&&&%%%%&&&%%&&%%&&&&&&%%%%%&%%&&&&&&%.#", +".+@$%%&&&&&&&&&&&&&&&&&&&&&&%%%%&&&&&&&&&&&&&&&&&&&&&&%%.#", +".+@$%%%&&&&&&&&&&&&&&&&&&&&%%%%%%&&&&&&&&&&&&&&&&&&&&%%%.#", +".+@$%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%.#", +".+@$%*************************************************%%.#", +".+@$%*************************************************=%.#", +".+@$%%=================================================%.#", +".+@$%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%.#", +".+@$%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%.#", +".+@$%%%&&&&&%%%%&&&&&%%%%&&&&&%%%%%%%%%%%%%%%%%%%%%%%%%%.#", +".+@$%%&%%%%%&%%&%%%%%&%%&%%%%%&%%%%%%%%%%%%%%%%%%%%%%%%%.#", +".+@$%%&%%%%%&%%&%%%%%&%%&%%%%%&%%%%%%%%%%%%%%%%%%%%%%%%%.#", +".+@$%%&%%%%%&%%&%%%%%&%%&%%%%%&%%%%%%%%%%%%%%%%%%%%%%%%%.#", +".+@$%%&%%%%%&%%&%%%%%&%%&%%%%%&%%%%%%%%%%%%%%%%%%%%%%%%%.#", +".+@$%%&%%%%%&%%&%%%%%&%%&%%%%%&%%.%%%%%.%%.%%%.%%%%%%%%%.#", +".+@$%%%&&&&&%%%%&&&&&%%%%&&&&&%%%..%%%..%%.%%%.%%%%%%%%%.#", +".+@$%%&%%%%%&%%&%%%%%&%%&%%%%%&%%.%.%.%.%%.%%%.%%%%%%%%%.#", +".+@$%%&%%%%%&%%&%%%%%&%%&%%%%%&%%.%%.%%.%%.%%%.%%.....%%.#", +".+@$%%&%%%%%&%%&%%%%%&%%&%%%%%&%%.%%.%%.%%.....%%%%%.%%%.#", +".+@$%%&%%%%%&%%&%%%%%&%%&%%%%%&%%.%%%%%.%%.%%%.%%%%.%%%%.#", +".+@$%%&%%%%%&%%&%%%%%&%%&%%%%%&%%.%%%%%.%%.%%%.%%%.%%%%%.#", +".+@$%%%&&&&&%%%%&&&&&%%%%&&&&&%%%.%%%%%.%%.%%%.%%.....%%.#", +".+@$%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%.#", +".+@$%*************************************************%%.#", +".+@$%*************************************************=%.#", +".+@$%%=================================================%.#", +".+@$%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%&%%.#", +".+@$%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%.#", +".+@$%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%..#", +" .......................................................# ", +" ###################################################### "}; diff --git a/wmlongrun/src/backdrop_on.xpm b/wmlongrun/src/backdrop_on.xpm new file mode 100644 index 0000000..d30fbc2 --- /dev/null +++ b/wmlongrun/src/backdrop_on.xpm @@ -0,0 +1,68 @@ +/* XPM */ +static char * backdrop_on_xpm[] = { +"58 58 7 1", +" c None", +". c #020202", +"+ c #6EC63B s Back0", +"@ c #DEDEDE", +"# c #6CB237 s Back1", +"$ c #3E463E", +"% c #000000", +" ...................................................... ", +" .++++++++++++++++++++++++++++++++++++++++++++++++++++++. ", +".++++++++++++++++++++++++++++++++++++++++++++++++++++++++@", +".++++++++++++++++++++++++++++++++++++++++++++++++++++++++@", +".++++++++++++++++++++++++++++++++++++++++++++++++++++++++@", +".++++++####################++++++####################++++@", +".+++++######################++++######################+++@", +".++++###++++###++++###++++###++##+++++###++++##+#+++###++@", +".++++##++##++#++##++#++##++##++##++##++#++##++#+++#++##++@", +".++++##++##++#++#####++##++##++##++##++#++##++#++##++##++@", +".++++##++++++#++#####++##++##++##++##++#++++++#++######++@", +".++++##++#####++#####++##++##++##+++++##++#####++######++@", +".++++##++#####++##++#++##++##++##++#####++#####++######++@", +".++++###+++++##++++###++++###++##++######+++++#++######++@", +".+++++######################++++######################+++@", +".++++++####################++++++####################++++@", +".++++++++++++++++++++++++++++++++++++++++++++++++++++++++@", +".++++$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$+++@", +".++++$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$#++@", +".+++++#################################################++@", +".++++++++++++++++++++++++++++++++++++++++++++++++++++++++@", +".++++++++++++++++++++++++++++++++++++++++++++++++++++++++@", +".++++++#####++++#####++++#####+++++++++++++++++++++++++++@", +".+++++#+++++#++#+++++#++#+++++#++++++++++++++++++++++++++@", +".+++++#+++++#++#+++++#++#+++++#++++++++++++++++++++++++++@", +".+++++#+++++#++#+++++#++#+++++#++++++++++++++++++++++++++@", +".+++++#+++++#++#+++++#++#+++++#++++++++++++++++++++++++++@", +".+++++#+++++#++#+++++#++#+++++#++.+++++.++.+++.++++++++++@", +".++++++#####++++#####++++#####+++..+++..++.+++.++++++++++@", +".+++++#+++++#++#+++++#++#+++++#++.+.+.+.++.+++.++++++++++@", +".+++++#+++++#++#+++++#++#+++++#++.++.++.++.+++.++.....+++@", +".+++++#+++++#++#+++++#++#+++++#++.++.++.++.....+++++.++++@", +".+++++#+++++#++#+++++#++#+++++#++.+++++.++.+++.++++.+++++@", +".+++++#+++++#++#+++++#++#+++++#++.+++++.++.+++.+++.++++++@", +".++++++#####++++#####++++#####+++.+++++.++.+++.++.....+++@", +".++++++++++++++++++++++++++++++++++++++++++++++++++++++++@", +".++++$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$+++@", +".++++$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$#++@", +".+++++#################################################++@", +".++++++++++++++++++++++++++++++++++++++++++++++++++++++++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+++@", +".++++++++++++++++++++++++++++++++++++++++++++++++++++++++@", +".++++++++++++++++++++++++++++++++++++++++++++++++++++++++@", +" %++++++++++++++++++++++++++++++++++++++++++++++++++++++@ ", +" @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ "}; diff --git a/wmlongrun/src/common.h b/wmlongrun/src/common.h new file mode 100644 index 0000000..9e30951 --- /dev/null +++ b/wmlongrun/src/common.h @@ -0,0 +1,11 @@ +/* + * common.h - common header file of WMLongRun + * + * Copyright (c) 2001 Seiichi SATO <[email protected]> + * + * licensed under the GPL + */ + +#define LONGRUN_FLAGS_UNKNOWN 0 +#define LONGRUN_FLAGS_PEFORMANCE 1 +#define LONGRUN_FLAGS_ECONOMY 2 diff --git a/wmlongrun/src/dockapp.c b/wmlongrun/src/dockapp.c new file mode 100644 index 0000000..bb500c3 --- /dev/null +++ b/wmlongrun/src/dockapp.c @@ -0,0 +1,391 @@ +/* + * Copyright (c) 1999 Alfredo K. Kojima + * Copyright (c) 2001, 2002 Seiichi SATO <[email protected]> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN + * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + + * This code is based on libdockapp-0.4.0 + * modified by Seiichi SATO <[email protected]> + */ + +#include "dockapp.h" + +#define WINDOWED_SIZE_W 64 +#define WINDOWED_SIZE_H 64 + +/* global */ +Display *display = NULL; +Bool dockapp_iswindowed = False; +Bool dockapp_isbrokenwm = False; + +/* private */ +static Window window = None; +static Window icon_window = None; +static GC gc = NULL; +static int depth = 0; +static Atom delete_win; +static int width, height; +static int offset_w, offset_h; + +void +dockapp_open_window(char *display_specified, char *appname, + unsigned w, unsigned h, int argc, char **argv) +{ + XClassHint *classhint; + XWMHints *wmhints; + Status stat; + XTextProperty title; + XSizeHints sizehints; + Window root; + int ww, wh; + + /* Open Connection to X Server */ + display = XOpenDisplay(display_specified); + if (!display) { + fprintf(stderr, "%s: could not open display %s!\n", argv[0], + XDisplayName(display_specified)); + exit(1); + } + root = DefaultRootWindow(display); + + width = w; + height = h; + + if (dockapp_iswindowed) { + offset_w = (WINDOWED_SIZE_W - w) / 2; + offset_h = (WINDOWED_SIZE_H - h) / 2; + ww = WINDOWED_SIZE_W; + wh = WINDOWED_SIZE_H; + } else { + offset_w = offset_h = 0; + ww = w; + wh = h; + } + + /* Create Windows */ + icon_window = XCreateSimpleWindow(display, root, 0, 0, ww, wh, 0, 0, 0); + if (dockapp_isbrokenwm) { + window = XCreateSimpleWindow(display, root, 0, 0, ww, wh, 0, 0, 0); + } else { + window = XCreateSimpleWindow(display, root, 0, 0, 1, 1, 0, 0, 0); + } + + /* Set ClassHint */ + classhint = XAllocClassHint(); + if (classhint == NULL) { + fprintf(stderr, "%s: can't allocate memory for wm hints!\n", argv[0]); + exit(1); + } + classhint->res_class = "DockApp"; + classhint->res_name = appname; + XSetClassHint(display, window, classhint); + XFree(classhint); + + /* Set WMHints */ + wmhints = XAllocWMHints(); + if (wmhints == NULL) { + fprintf(stderr, "%s: can't allocate memory for wm hints!\n", argv[0]); + exit(1); + } + wmhints->flags = IconWindowHint | WindowGroupHint; + if (!dockapp_iswindowed) { + wmhints->flags |= StateHint; + wmhints->initial_state = WithdrawnState; + } + wmhints->window_group = window; + wmhints->icon_window = icon_window; + XSetWMHints(display, window, wmhints); + XFree(wmhints); + + /* Set WM Protocols */ + delete_win = XInternAtom(display, "WM_DELETE_WINDOW", False); + XSetWMProtocols (display, icon_window, &delete_win, 1); + + /* Set Size Hints */ + sizehints.flags = USSize; + if (!dockapp_iswindowed) { + sizehints.flags |= USPosition; + sizehints.x = sizehints.y = 0; + } else { + sizehints.flags |= PMinSize | PMaxSize; + sizehints.min_width = sizehints.max_width = WINDOWED_SIZE_W; + sizehints.min_height = sizehints.max_height = WINDOWED_SIZE_H; + } + sizehints.width = ww; + sizehints.height = wh; + XSetWMNormalHints(display, icon_window, &sizehints); + + /* Set WindowTitle for AfterStep Wharf */ + stat = XStringListToTextProperty(&appname, 1, &title); + XSetWMName(display, window, &title); + XSetWMName(display, icon_window, &title); + + /* Set Command to start the app so it can be docked properly */ + XSetCommand(display, window, argv, argc); + + depth = DefaultDepth(display, DefaultScreen(display)); + gc = DefaultGC(display, DefaultScreen(display)); + + XFlush(display); +} + + +void +dockapp_set_eventmask(long mask) +{ + XSelectInput(display, icon_window, mask); + XSelectInput(display, window, mask); +} + + +static Pixmap +create_bg_pixmap(void) +{ + Pixmap bg; + + bg = XCreatePixmap(display, icon_window, WINDOWED_SIZE_W, WINDOWED_SIZE_H, + depth); + XSetForeground(display, gc, dockapp_getcolor("rgb:ae/aa/ae")); + XFillRectangle(display, bg, gc, 0, 0, WINDOWED_SIZE_W, WINDOWED_SIZE_H); + XSetForeground(display, gc, dockapp_getcolor("rgb:ff/ff/ff")); + XDrawLine(display, bg, gc, 0, 0, 0, 63); + XDrawLine(display, bg, gc, 1, 0, 1, 62); + XDrawLine(display, bg, gc, 2, 0, 63, 0); + XDrawLine(display, bg, gc, 2, 1, 62, 1); + XSetForeground(display, gc, dockapp_getcolor("rgb:52/55/52")); + XDrawLine(display, bg, gc, 1, 63, 63, 63); + XDrawLine(display, bg, gc, 2, 62, 63, 62); + XDrawLine(display, bg, gc, 63, 1, 63, 61); + XDrawLine(display, bg, gc, 62, 2, 62, 61); + + return bg; +} + + +void +dockapp_set_background(Pixmap pixmap) +{ + if (dockapp_iswindowed) { + Pixmap bg; + bg = create_bg_pixmap(); + XCopyArea(display, pixmap, bg, gc, 0, 0, width, height, + offset_w, offset_w); + XSetWindowBackgroundPixmap(display, icon_window, bg); + XSetWindowBackgroundPixmap(display, window, bg); + XFreePixmap(display, bg); + } else { + XSetWindowBackgroundPixmap(display, icon_window, pixmap); + XSetWindowBackgroundPixmap(display, window, pixmap); + } + XClearWindow(display, icon_window); + XFlush(display); +} + + +void +dockapp_show(void) +{ + if (!dockapp_iswindowed) + XMapRaised(display, window); + else + XMapRaised(display, icon_window); + + XFlush(display); +} + + +Bool +dockapp_xpm2pixmap(char **data, Pixmap *pixmap, Pixmap *mask, + XpmColorSymbol * colorSymbol, unsigned int nsymbols) +{ + XpmAttributes xpmAttr; + xpmAttr.valuemask = XpmCloseness; + xpmAttr.closeness = 40000; + + if (nsymbols) { + xpmAttr.colorsymbols = colorSymbol; + xpmAttr.numsymbols = nsymbols; + xpmAttr.valuemask |= XpmColorSymbols; + } + + if (XpmCreatePixmapFromData(display, icon_window, data, pixmap, mask, &xpmAttr) != 0) + return False; + + return True; +} + + +Pixmap +dockapp_XCreatePixmap(int w, int h) +{ + return (XCreatePixmap(display, icon_window, w, h, depth)); +} + + +void +dockapp_setshape(Pixmap mask, int x_ofs, int y_ofs) +{ + XShapeCombineMask(display, icon_window, ShapeBounding, -x_ofs, -y_ofs, + mask, ShapeSet); + XShapeCombineMask(display, window, ShapeBounding, -x_ofs, -y_ofs, + mask, ShapeSet); + XFlush(display); +} + + +void +dockapp_copyarea(Pixmap src, Pixmap dist, int x_src, int y_src, int w, int h, + int x_dist, int y_dist) +{ + XCopyArea(display, src, dist, gc, x_src, y_src, w, h, x_dist, y_dist); +} + + +void +dockapp_copy2window (Pixmap src) +{ + if (dockapp_isbrokenwm) { + XCopyArea(display, src, window, gc, 0, 0, width, height, offset_w, + offset_h); + } else { + XCopyArea(display, src, icon_window, gc, 0, 0, width, height, offset_w, + offset_h); + } +} + + +Bool +dockapp_nextevent_or_timeout(XEvent *event, unsigned long miliseconds) +{ + struct timeval timeout; + fd_set rset; + + XSync(display, False); + if (XPending(display)) { + XNextEvent(display, event); + return True; + } + + timeout.tv_sec = miliseconds / 1000; + timeout.tv_usec = (miliseconds % 1000) * 1000; + + FD_ZERO(&rset); + FD_SET(ConnectionNumber(display), &rset); + if (select(ConnectionNumber(display)+1, &rset, NULL, NULL, &timeout) > 0) { + XNextEvent(display, event); + if (event->type == ClientMessage) { + if (event->xclient.data.l[0] == delete_win) { + XDestroyWindow(display,event->xclient.window); + XCloseDisplay(display); + exit(0); + } + } + if (dockapp_iswindowed) { + event->xbutton.x -= offset_w; + event->xbutton.y -= offset_h; + } + return True; + } + + return False; +} + + +unsigned long +dockapp_getcolor(char *color_name) +{ + XColor color; + + if (!XParseColor(display, DefaultColormap(display, DefaultScreen(display)), + color_name, &color)) + fprintf(stderr, "can't parse color %s\n", color_name), exit(1); + + if (!XAllocColor(display, DefaultColormap(display, DefaultScreen(display)), + &color)) { + fprintf(stderr, "can't allocate color %s. Using black\n", color_name); + return BlackPixel(display, DefaultScreen(display)); + } + + return color.pixel; +} + + +unsigned long +dockapp_blendedcolor(char *color_name, int r, int g, int b, float fac) +{ + XColor color; + + if ((r < -255 || r > 255)||(g < -255 || g > 255)||(b < -255 || b > 255)){ + fprintf(stderr, "r:%d,g:%d,b:%d (r,g,b must be 0 to 255)", r, g, b); + exit(1); + } + + r *= 255; + g *= 255; + b *= 255; + + if (!XParseColor(display, DefaultColormap(display, DefaultScreen(display)), + color_name, &color)) + fprintf(stderr, "can't parse color %s\n", color_name), exit(1); + + if (!XAllocColor(display, DefaultColormap(display, DefaultScreen(display)), + &color)) { + fprintf(stderr, "can't allocate color %s. Using black\n", color_name); + return BlackPixel(display, DefaultScreen(display)); + } + + if (DefaultDepth(display, DefaultScreen(display)) < 16) + return color.pixel; + + /* red */ + if (color.red + r > 0xffff) { + color.red = 0xffff; + } else if (color.red + r < 0) { + color.red = 0; + } else { + color.red = (unsigned short)(fac * color.red + r); + } + + /* green */ + if (color.green + g > 0xffff) { + color.green = 0xffff; + } else if (color.green + g < 0) { + color.green = 0; + } else { + color.green = (unsigned short)(fac * color.green + g); + } + + /* blue */ + if (color.blue + b > 0xffff) { + color.blue = 0xffff; + } else if (color.blue + b < 0) { + color.blue = 0; + } else { + color.blue = (unsigned short)(fac * color.blue + b); + } + + color.flags = DoRed | DoGreen | DoBlue; + + if (!XAllocColor(display, DefaultColormap(display, DefaultScreen(display)), + &color)) { + fprintf(stderr, "can't allocate color %s. Using black\n", color_name); + return BlackPixel(display, DefaultScreen(display)); + } + + return color.pixel; +} diff --git a/wmlongrun/src/dockapp.h b/wmlongrun/src/dockapp.h new file mode 100644 index 0000000..ebb1e15 --- /dev/null +++ b/wmlongrun/src/dockapp.h @@ -0,0 +1,96 @@ +/* + * Copyright (c) 1999 Alfredo K. Kojima + * Copyright (c) 2001, 2002 Seiichi SATO <[email protected]> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN + * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + + * This code is based on libdockapp-0.4.0 + * modified by Seiichi SATO <[email protected]> + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <X11/Xlib.h> +#include <X11/xpm.h> +#include <X11/extensions/shape.h> + +#include <stdio.h> + +#if STDC_HEADERS +# include <stdlib.h> +# include <stddef.h> +#else +# if HAVE_STDLIB_H +# include <stdlib.h> +# endif +#endif + +#if HAVE_STRING_H +# if !STDC_HEADERS && HAVE_MEMORY_H +# include <memory.h> +# endif +# include <string.h> +#endif +#if HAVE_STRINGS_H +# include <strings.h> +#endif + +#if HAVE_SELECT +# include <sys/select.h> +#endif + +#if TIME_WITH_SYS_TIME +# include <sys/time.h> +# include <time.h> +#else +# if HAVE_SYS_TIME_H +# include <sys/time.h> +# else +# include <time.h> +# endif +#endif + +#if HAVE_UNISTD_H +# include <unistd.h> +#else +/* We are in trouble. */ +#endif + +extern Display *display; +extern Bool dockapp_iswindowed; +extern Bool dockapp_isbrokenwm; + + +void dockapp_open_window(char *display_specified, char *appname, + unsigned w, unsigned h, int argc, char **argv); +void dockapp_set_eventmask(long mask); +void dockapp_set_background(Pixmap pixmap); +void dockapp_show(void); +Bool dockapp_xpm2pixmap(char **data, Pixmap * pixmap, Pixmap * mask, + XpmColorSymbol * colorSymbol, + unsigned int nsymbols); +Pixmap dockapp_XCreatePixmap(int w, int h); +void dockapp_setshape(Pixmap mask, int x_ofs, int y_ofs); +void dockapp_copyarea(Pixmap src, Pixmap dist, int x_src, int y_src, + int w, int h, int x_dist, int y_dist); +void dockapp_copy2window(Pixmap src); +Bool dockapp_nextevent_or_timeout(XEvent * event, unsigned long miliseconds); +unsigned long dockapp_getcolor(char *color); +unsigned long dockapp_blendedcolor(char *color, int r, int g, int b, float fac); diff --git a/wmlongrun/src/longrun.h b/wmlongrun/src/longrun.h new file mode 100644 index 0000000..bce587f --- /dev/null +++ b/wmlongrun/src/longrun.h @@ -0,0 +1,10 @@ +/* + * longrun.h - longrun module header file + * + * Copyright (c) 2001 Seiichi SATO <[email protected]> + * + * licensed under the GPL + */ + +void longrun_init(char *cpuid_dev, char *msr_dev); +void longrun_get_stat(int *percent, int *flags, int *mhz, int *voltz); diff --git a/wmlongrun/src/longrun_freebsd.c b/wmlongrun/src/longrun_freebsd.c new file mode 100644 index 0000000..ab55e4b --- /dev/null +++ b/wmlongrun/src/longrun_freebsd.c @@ -0,0 +1,80 @@ +/* + * longrun_freebsd.c - module to get LongRun(TM) status, for FreeBSD + * + * Copyright(C) 2001,2002 Seiichi SATO <[email protected]> + * + * licensed under the GPL + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <stdio.h> +#include <stdlib.h> +#if defined(HAVE_STRING_H) +#include <string.h> +#elif defined(HAVE_STRINGS_H) +#include <strings.h> +#endif +#include <unistd.h> +#include <err.h> +#include <sys/sysctl.h> +#include <sys/file.h> +#include "longrun.h" +#include "common.h" + +#define LONGRUN_MODE_MINFREQUENCY 0x00 +#define LONGRUN_MODE_ECONOMY 0x01 +#define LONGRUN_MODE_PERFORMANCE 0x02 +#define LONGRUN_MODE_MAXFREQUENCY 0x03 + +void +longrun_init(char *dummy, char *dummy2) +{ + /* You don't need initialization under FreeBSD */ +} + +/* + * percent: performance level (0 to 100) + * flags: performance/economy/unknown + * mhz: frequency + * volts: voltage + */ +void +longrun_get_stat(int *percent, int *flags, int *mhz, int *voltz) +{ + u_int ret_val; + size_t len; + + *percent = *mhz = *voltz = *flags = 0; + + /* level */ + len = sizeof(ret_val); + if (sysctlbyname("hw.crusoe.percentage", &ret_val, &len, NULL, 0) == 0) + *percent = (int) ret_val; + + /* frequency */ + if (sysctlbyname("hw.crusoe.frequency", &ret_val, &len, NULL, 0) == 0) + *mhz = (int) ret_val; + + /* voltage */ + if (sysctlbyname("hw.crusoe.voltage", &ret_val, &len, NULL, 0) == 0) + *voltz = (int) ret_val; + + /* flags */ + if (sysctlbyname("hw.crusoe.longrun", &ret_val, &len, NULL, 0) == 0) { + switch (ret_val) { + case LONGRUN_MODE_MINFREQUENCY: + case LONGRUN_MODE_ECONOMY: + *flags = LONGRUN_FLAGS_ECONOMY; + break; + case LONGRUN_MODE_PERFORMANCE: + case LONGRUN_MODE_MAXFREQUENCY: + *flags = LONGRUN_FLAGS_PEFORMANCE; + break; + default: + *flags = LONGRUN_FLAGS_UNKNOWN; + } + } +} diff --git a/wmlongrun/src/longrun_linux.c b/wmlongrun/src/longrun_linux.c new file mode 100644 index 0000000..4b66e19 --- /dev/null +++ b/wmlongrun/src/longrun_linux.c @@ -0,0 +1,199 @@ +/* + * longrun_linux.c - module to get LongRun(TM) status, for GNU/Linux + * + * Copyright(C) 2001 Transmeta Corporation + * Copyright(C) 2001 Seiichi SATO <[email protected]> + * + * licensed under the GPL + */ +#undef USE_PREAD + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <errno.h> +#ifdef USE_PREAD +#define __USE_UNIX98 /* for pread/pwrite */ +#endif +#include <unistd.h> +#include "common.h" + +#define MSR_DEVICE "/dev/cpu/0/msr" +#define MSR_TMx86_LONGRUN 0x80868010 +#define MSR_TMx86_LONGRUN_FLAGS 0x80868011 + +#define LONGRUN_MASK(x) ((x) & 0x0000007f) +#define LONGRUN_RESERVED(x) ((x) & 0xffffff80) +#define LONGRUN_WRITE(x, y) (LONGRUN_RESERVED(x) | LONGRUN_MASK(y)) + +#define CPUID_DEVICE "/dev/cpu/0/cpuid" +#define CPUID_TMx86_VENDOR_ID 0x80860000 +#define CPUID_TMx86_PROCESSOR_INFO 0x80860001 +#define CPUID_TMx86_LONGRUN_STATUS 0x80860007 +#define CPUID_TMx86_FEATURE_LONGRUN(x) ((x) & 0x02) + +static int cpuid_fd; /* CPUID file descriptor */ +static char *cpuid_device; /* CPUID device name */ +static int msr_fd; /* MSR file descriptor */ +static char *msr_device; /* MSR device name */ + +static void +read_cpuid(long address, int *eax, int *ebx, int *ecx, int *edx) +{ + uint32_t data[4]; + +#ifdef USE_PREAD + if (pread(cpuid_fd, &data, 16, address) != 16) { + perror("pread"); +#else + if (lseek(cpuid_fd, address, SEEK_SET) != address) { + perror("lseek"); + exit(1); + } + if (read(cpuid_fd, &data, 16) != 16) { + perror("read"); +#endif + exit(1); + } + + if (eax) + *eax = data[0]; + if (ebx) + *ebx = data[1]; + if (ecx) + *ecx = data[2]; + if (edx) + *edx = data[3]; +} + +/* note: if an output is NULL, then don't set it */ +static void +read_msr(long address, int *lower, int *upper) +{ + uint32_t data[2]; + +#ifdef USE_PREAD + if (pread(msr_fd, &data, 8, address) != 8) { + perror("pread"); +#else + if (lseek(msr_fd, address, SEEK_SET) != address) { + perror("lseek"); + exit(1); + } + if (read(msr_fd, &data, 8) != 8) { + perror("read"); +#endif + exit(1); + } + + if (lower) + *lower = data[0]; + if (upper) + *upper = data[1]; +} + +void +longrun_init(char *cpuid_dev, char *msr_dev) +{ + int eax, ebx, ecx, edx; + + /* set CPUID device */ + cpuid_device = CPUID_DEVICE; + if (cpuid_dev) + cpuid_device = cpuid_dev; + + /* set MSR device */ + msr_device = MSR_DEVICE; + if (msr_dev) + msr_device = msr_dev; + + /* open CPUID device */ + if ((cpuid_fd = open(cpuid_device, O_RDONLY)) < 0) { + fprintf(stderr, "error opening %s\n", cpuid_device); + if (errno == ENODEV) + fprintf(stderr, + "make sure your kernel was compiled with CONFIG_X86_CPUID=y\n"); + exit(1); + } + + /* open MSR device */ + if ((msr_fd = open(msr_device, O_RDONLY)) < 0) { + fprintf(stderr, "error opening %s\n", msr_device); + if (errno == ENODEV) + fprintf(stderr, + "make sure your kernel was compiled with CONFIG_X86_MSR=y\n"); + exit(1); + } + + /* test for "TransmetaCPU" */ + read_cpuid(CPUID_TMx86_VENDOR_ID, &eax, &ebx, &ecx, &edx); + if (ebx != 0x6e617254 || ecx != 0x55504361 || edx != 0x74656d73) { + fprintf(stderr, "not a Transmeta x86 CPU\n"); + exit(1); + } + + /* test for LongRun feature flag */ + read_cpuid(CPUID_TMx86_PROCESSOR_INFO, &eax, &ebx, &ecx, &edx); + if (!CPUID_TMx86_FEATURE_LONGRUN(edx)) { + printf("LongRun: unsupported\n"); + exit(0); + } + + /* close device */ + close(cpuid_fd); + close(msr_fd); +} + + + +/* + * percent: performance level (0 to 100) + * flags: performance/economy/unknown + * mhz: frequency + * volts: voltage + */ +void +longrun_get_stat(int *percent, int *flags, int *mhz, int *voltz) +{ + int eax, ebx, ecx; + + /* open CPUID device */ + if ((cpuid_fd = open(cpuid_device, O_RDWR)) < 0) { + fprintf(stderr, "error opening %s\n", cpuid_device); + if (errno == ENODEV) + fprintf(stderr, + "make sure your kernel was compiled with CONFIG_X86_CPUID=y\n"); + exit(1); + } + + /* open MSR device */ + if ((msr_fd = open(msr_device, O_RDWR)) < 0) { + fprintf(stderr, "error opening %s\n", msr_device); + if (errno == ENODEV) + fprintf(stderr, + "make sure your kernel was compiled with CONFIG_X86_MSR=y\n"); + exit(1); + } + + /* frequency, voltage, performance level, */ + read_cpuid(CPUID_TMx86_LONGRUN_STATUS, &eax, &ebx, &ecx, 0); + *mhz = eax; + *voltz = ebx; + *percent = ecx; + + /* flags */ + read_msr(MSR_TMx86_LONGRUN_FLAGS, flags, NULL); + *flags = + (*flags & 1) ? LONGRUN_FLAGS_PEFORMANCE : LONGRUN_FLAGS_ECONOMY; + + /* close device */ + close(cpuid_fd); + close(msr_fd); +} diff --git a/wmlongrun/src/main.c b/wmlongrun/src/main.c new file mode 100644 index 0000000..59deb89 --- /dev/null +++ b/wmlongrun/src/main.c @@ -0,0 +1,326 @@ +/* + * WMLongRun - A dockapp to monitor LongRun status + * Copyright (C) 2001,2002 Seiichi SATO <[email protected]> + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <stdio.h> +#if defined(HAVE_STRING_H) +#include <string.h> +#elif defined(HAVE_STRINGS_H) +#include <strings.h> +#endif +#include <unistd.h> +#include <time.h> +#include <signal.h> +#include <sys/time.h> +#include "dockapp.h" +#include "longrun.h" +#include "common.h" +#include "backdrop_on.xpm" +#include "backdrop_off.xpm" +#include "backdrop_led.xpm" +#include "parts.xpm" + +#define SIZE 58 +#define WINDOWED_BG " \tc #AEAAAE" + +typedef enum { LIGHTON, LIGHTOFF} light; + +Pixmap pixmap; +Pixmap backdrop_on; +Pixmap backdrop_off; +Pixmap backdrop_led; +Pixmap parts; +Pixmap mask; +static char *display_name = ""; +static char *light_color = NULL; +static unsigned update_interval = 500; +static light backlight = LIGHTOFF; +static Bool is_led_style = False; + +static char *cpuid_dev = NULL; +static char *msr_dev = NULL; + +/* prototypes */ +static void switch_light(void); +static void update(void); +static void parse_arguments(int argc, char **argv); +static void print_help(char *prog); + +int main(int argc, char **argv) +{ + XEvent event; + XpmColorSymbol colors[2] = { {"Back0", NULL, 0}, {"Back1", NULL, 0} }; + int ncolor = 0; + + /* Parse CommandLine */ + parse_arguments(argc, argv); + + /* Initialize Application */ + dockapp_open_window(display_name, PACKAGE, SIZE, SIZE, argc, argv); + dockapp_set_eventmask(ButtonPressMask); + + if (light_color) { + colors[0].pixel = dockapp_getcolor(light_color); + colors[1].pixel = dockapp_blendedcolor(light_color, -24, -24, -24, 1.0); + ncolor = 2; + } + + /* change raw xpm data to pixmap */ + if (dockapp_iswindowed) + backdrop_on_xpm[1] = backdrop_off_xpm[1] = WINDOWED_BG; + if (!is_led_style) { + dockapp_xpm2pixmap(backdrop_on_xpm, &backdrop_on, &mask, colors,ncolor); + dockapp_xpm2pixmap(backdrop_off_xpm, &backdrop_off, NULL, NULL, 0); + } else { + dockapp_xpm2pixmap(backdrop_led_xpm, &backdrop_led, &mask, colors, ncolor); + } + dockapp_xpm2pixmap(parts_xpm, &parts, NULL, colors, ncolor); + /* shape window */ + if (!dockapp_iswindowed) + dockapp_setshape(mask, 0, 0); + if (mask) XFreePixmap(display, mask); + /* pixmap: draw area */ + pixmap = dockapp_XCreatePixmap(SIZE, SIZE); + + /* Initialize pixmap */ + longrun_init(cpuid_dev, msr_dev); + update(); + dockapp_set_background(pixmap); + dockapp_show(); + + /* Main loop */ + for (;;) { + if (dockapp_nextevent_or_timeout(&event, update_interval)) { + /* Next Event */ + switch(event.type) { + case ButtonPress: + if (!is_led_style) { /* led does not have back-light */ + switch_light(); + update(); + } + break; + default: /* make gcc happy */ + break; + } + } else { + /* Time Out */ + update(); + } + } + + return 0; +} + +/* called when mouse button pressed */ +static void switch_light(void) +{ + switch (backlight) { + case LIGHTOFF: + backlight = LIGHTON; + break; + case LIGHTON: + backlight = LIGHTOFF; + break; + } +} + + +static void update(void) +{ + static int percent; /* LongRun performance level */ + static int flags; /* LongRun flags */ + static int mhz; /* LongRun frequency */ + static int voltz; /* LongRun voltage */ + + int digit1 = 0, digit10 = 0, digit100 = 0; + + longrun_get_stat(&percent, &flags, &mhz, &voltz); + + digit100 = mhz / 100; + digit10 = (mhz - digit100 * 100) / 10; + digit1 = mhz - digit100 * 100 - digit10 * 10; + + /* LCD interface */ + if (!is_led_style) { + int y_lrmode = 0, y_gauge = 0, y_digit = 0; + + /* clear */ + switch (backlight) { + case LIGHTON: + dockapp_copyarea(backdrop_on, pixmap, 0, 0, 58, 58, 0, 0); + y_lrmode = 11; + y_gauge = 14; + y_digit = 13; + break; + case LIGHTOFF: + dockapp_copyarea(backdrop_off, pixmap, 0, 0, 58, 58, 0, 0); + break; + } + + /* longrun flags (performance or economy) */ + switch (flags) { + case LONGRUN_FLAGS_PEFORMANCE: + dockapp_copyarea(parts, pixmap, 24, y_lrmode, 24, 11, 31, 5); + break; + case LONGRUN_FLAGS_ECONOMY: + dockapp_copyarea(parts, pixmap, 0, y_lrmode, 24, 11, 5, 5); + break; + default: + break; /* make gcc happy */ + } + + /* draw digit (frequency) */ + dockapp_copyarea(parts, pixmap, digit100*7,y_digit+33, 7,13, 6,22); + dockapp_copyarea(parts, pixmap, digit10*7,y_digit+33, 7,13, 15,22); + dockapp_copyarea(parts, pixmap, digit1*7,y_digit+33, 7,13, 24,22); + + /* draw level gauge */ + dockapp_copyarea(parts, pixmap, 0,y_gauge+72, 49*percent/100,14,5,40); + } + + /* LED interface */ + else { + dockapp_copyarea(backdrop_led, pixmap, 0, 0, 58, 58, 0, 0); + /* longrun flags (performance or economy) */ + switch (flags) { + case LONGRUN_FLAGS_PEFORMANCE: + dockapp_copyarea(parts, pixmap, 24, 22, 24, 11, 30, 3); + break; + case LONGRUN_FLAGS_ECONOMY: + dockapp_copyarea(parts, pixmap, 0, 22, 24, 11, 3, 3); + break; + default: + break; /* make gcc happy */ + } + + /* draw digit (frequency) */ + dockapp_copyarea(parts, pixmap, digit100*7,59, 7,13, 4,22); + dockapp_copyarea(parts, pixmap, digit10*7,59, 7,13, 13,22); + dockapp_copyarea(parts, pixmap, digit1*7,59, 7,13, 22,22); + + /* draw level gauge */ + dockapp_copyarea(parts, pixmap, 0, 100, 56 * percent / 100, 16, 1, 41); + } + + /* show */ + dockapp_copy2window(pixmap); +} + +static void parse_arguments(int argc, char **argv) +{ + int i; + for (i = 1; i < argc; i++) { + if (!strcmp(argv[i], "--help") || !strcmp(argv[i], "-h")) + print_help(argv[0]), exit(0); + + else if (!strcmp(argv[i], "--version") || !strcmp(argv[i], "-v")) + printf("%s version %s\n", PACKAGE, VERSION), exit(0); + + else if (!strcmp(argv[i], "--display") || !strcmp(argv[i], "-d")) { + display_name = argv[i + 1]; + i++; + } + + else if (!strcmp(argv[i], "--backlight") + || !strcmp(argv[i], "-bl")) + backlight = LIGHTON; + + else if (!strcmp(argv[i], "--light-color") + || !strcmp(argv[i], "-lc")) { + if (argc == i + 1) + fprintf(stderr, + "%s: error parsing argument for option %s\n", + argv[0], argv[i]), exit(1); + light_color = argv[i + 1]; + i++; + } + + else if (!strcmp(argv[i], "--interval") || !strcmp(argv[i], "-i")) { + int integer; + if (argc == i + 1) + fprintf(stderr, + "%s: error parsing argument for option %s\n", + argv[0], argv[i]), exit(1); + if (sscanf(argv[i + 1], "%i", &integer) != 1) + fprintf(stderr, + "%s: error parsing argument for option %s\n", + argv[0], argv[i]), exit(1); + if (integer < 1) + fprintf(stderr, "%s: argument %s must be >=1\n", + argv[0], argv[i]), exit(1); + update_interval = integer; + i++; + } + + else if (!strcmp(argv[i], "--led") || !strcmp(argv[i], "-l")) + is_led_style = True; + + else if (!strcmp(argv[i], "--windowed") + || !strcmp(argv[i], "-w")) + dockapp_iswindowed = True; + + else if (!strcmp(argv[i], "--broken-wm") + || !strcmp(argv[i], "-bw")) + dockapp_isbrokenwm = True; + +#ifdef LINUX + else if (!strcmp(argv[i], "--cpuid-device") + || !strcmp(argv[i], "-cd")) { + cpuid_dev = argv[i + 1]; + i++; + } + else if (!strcmp(argv[i], "--msr-device") + || !strcmp(argv[i], "-md")) { + msr_dev = argv[i + 1]; + i++; + } +#endif + + else { + fprintf(stderr, "%s: unrecognized option '%s'\n", argv[0], + argv[i]); + print_help(argv[0]), exit(1); + } + } +} + +static void print_help(char *prog) +{ + printf("Usage : %s [OPTIONS]\n", prog); + printf + ("WMLongRun - A dockapp to monitor the LongRun(tm) status on Crusoe(tm) processors.\n"); + printf(" -d, --display <string> display to use\n"); + printf(" -bl, --backlight turn on back-light\n"); + printf(" -lc, --light-color <string> back-light color(rgb:6E/C6/3B is default)\n"); + printf(" -i, --interval <number> number of milliseconds between updates\n"); + printf(" (500 is default)\n"); +#ifdef LINUX + printf(" -cd, --cpuid-device <device> CPUID device ('/dev/cpu/0/cpuid' is default)\n"); + printf(" -md, --msr-device <device> MSR device ('/dev/cpu/0/msr' is default)\n"); +#endif + printf(" -l, --led run the application with LED interface\n"); + printf(" -h, --help show this help text and exit\n"); + printf(" -v, --version show program version and exit\n"); + printf(" -w, --windowed run the application in windowed mode\n"); + printf(" -bw, --broken-wm activate broken window manager fix\n"); +} diff --git a/wmlongrun/src/parts.xpm b/wmlongrun/src/parts.xpm new file mode 100644 index 0000000..70958a0 --- /dev/null +++ b/wmlongrun/src/parts.xpm @@ -0,0 +1,190 @@ +/* XPM */ +static char * parts_xpm[] = { +"70 118 69 1", +" c None", +". c #8E968A", +"+ c #000000", +"@ c #6EC63B s Back0", +"# c #202020", +"$ c #20B2AE", +"% c #767C6F", +"& c #5E665A", +"* c #6E766E", +"= c #6CB237 s Back1", +"- c #004941", +"; c #188A86", +"> c #020202", +", c #1FD200", +"' c #22D000", +") c #25CD00", +"! c #28CA00", +"~ c #2BC700", +"{ c #2EC400", +"] c #31C100", +"^ c #34BE00", +"/ c #37BB00", +"( c #3AB800", +"_ c #3DB500", +": c #40B200", +"< c #43B000", +"[ c #46AD00", +"} c #49AA00", +"| c #4CA700", +"1 c #4FA400", +"2 c #52A100", +"3 c #559E00", +"4 c #589B00", +"5 c #5B9800", +"6 c #5E9500", +"7 c #619200", +"8 c #649000", +"9 c #678D00", +"0 c #6A8A00", +"a c #6D8700", +"b c #708400", +"c c #738100", +"d c #767E00", +"e c #797B00", +"f c #7C7800", +"g c #7F7500", +"h c #827200", +"i c #857000", +"j c #886D00", +"k c #8B6A00", +"l c #8E6700", +"m c #916400", +"n c #946100", +"o c #975E00", +"p c #9A5B00", +"q c #9D5800", +"r c #A05500", +"s c #A35200", +"t c #A65000", +"u c #A94D00", +"v c #AC4A00", +"w c #AF4700", +"x c #B24400", +"y c #B54100", +"z c #B83E00", +"A c #BB3B00", +"B c #BE3800", +"C c #C13500", +"D c #C43200", +"..++++++++++++++++++++....++++++++++++++++++++.. ", +".++++++++++++++++++++++..++++++++++++++++++++++. ", +"+++....+++....+++....+++++.....+++....++.+...+++ ", +"++..++..+..++..+..++..++++..++..+..++..+...+..++ ", +"++..++..+..+++++..++..++++..++..+..++..+..++..++ ", +"++......+..+++++..++..++++..++..+......+..++++++ ", +"++..+++++..+++++..++..++++.....++..+++++..++++++ ", +"++..+++++..++..+..++..++++..+++++..+++++..++++++ ", +"+++.....++....+++....+++++..++++++.....+..++++++ ", +".++++++++++++++++++++++..++++++++++++++++++++++. ", +"..++++++++++++++++++++....++++++++++++++++++++.. ", +"@@++++++++++++++++++++@@@@++++++++++++++++++++@@ ", +"@++++++++++++++++++++++@@++++++++++++++++++++++@ ", +"+++@@@@+++@@@@+++@@@@+++++@@@@@+++@@@@++@+@@@+++ ", +"++@@++@@+@@++@@+@@++@@++++@@++@@+@@++@@+@@@+@@++ ", +"++@@++@@+@@+++++@@++@@++++@@++@@+@@++@@+@@++@@++ ", +"++@@@@@@+@@+++++@@++@@++++@@++@@+@@@@@@+@@++++++ ", +"++@@+++++@@+++++@@++@@++++@@@@@++@@+++++@@++++++ ", +"++@@+++++@@++@@+@@++@@++++@@+++++@@+++++@@++++++ ", +"+++@@@@@++@@@@+++@@@@+++++@@++++++@@@@@+@@++++++ ", +"@++++++++++++++++++++++@@++++++++++++++++++++++@ ", +"@@++++++++++++++++++++@@@@++++++++++++++++++++@@ ", +"##$$$$$$$$$$$$$$$$$$$$####$$$$$$$$$$$$$$$$$$$$## ", +"#$$$$$$$$$$$$$$$$$$$$$$##$$$$$$$$$$$$$$$$$$$$$$# ", +"$$$####$$$####$$$####$$$$$#####$$$####$$#$###$$$ ", +"$$##$$##$##$$##$##$$##$$$$##$$##$##$$##$###$##$$ ", +"$$##$$##$##$$$$$##$$##$$$$##$$##$##$$##$##$$##$$ ", +"$$######$##$$$$$##$$##$$$$##$$##$######$##$$$$$$ ", +"$$##$$$$$##$$$$$##$$##$$$$#####$$##$$$$$##$$$$$$ ", +"$$##$$$$$##$$##$##$$##$$$$##$$$$$##$$$$$##$$$$$$ ", +"$$$#####$$####$$$####$$$$$##$$$$$$#####$##$$$$$$ ", +"#$$$$$$$$$$$$$$$$$$$$$$##$$$$$$$$$$$$$$$$$$$$$$# ", +"##$$$$$$$$$$$$$$$$$$$$####$$$$$$$$$$$$$$$$$$$$## ", +".+++++..%%%%%..+++++..+++++..%%%%%..+++++..+++++..+++++..+++++..+++++.", +"+.....+%.....+%.....+&.....++.....++.....%+.....%%.....++.....++.....+", +"+.....+%.....+%.....+&.....++.....++.....%+.....%%.....++.....++.....+", +"+.....+%.....+%.....+&.....++.....++.....%+.....%%.....++.....++.....+", +"+.....+%.....+%.....+&.....++.....++.....%+.....%%.....++.....++.....+", +"+.....+%.....+%.....+&.....++.....++.....%+.....%%.....++.....++.....+", +".%%%%%..%%%%%..+++++..+++++..+++++..+++++..+++++..%%%%%..+++++..+++++.", +"+.....+%.....++.....%%.....+%.....+%.....++.....+%.....++.....+%.....+", +"+.....+%.....++.....%%.....+%.....+%.....++.....+%.....++.....+%.....+", +"+.....+%.....++.....%%.....+%.....+%.....++.....+%.....++.....+%.....+", +"+.....+%.....++.....%%.....+%.....+%.....++.....+%.....++.....+%.....+", +"+.....+%.....++.....%%.....+%.....+%.....++.....+%.....++.....+%.....+", +"*+++++..%%%%%..+++++..+++++..%%%%%..+++++..+++++..%%%%%..+++++..+++++.", +"@+++++@@=====@@+++++@@+++++@@=====@@+++++@@+++++@@+++++@@+++++@@+++++@", +"+@@@@@+=@@@@@+=@@@@@+=@@@@@++@@@@@++@@@@@=+@@@@@==@@@@@++@@@@@++@@@@@+", +"+@@@@@+=@@@@@+=@@@@@+=@@@@@++@@@@@++@@@@@=+@@@@@==@@@@@++@@@@@++@@@@@+", +"+@@@@@+=@@@@@+=@@@@@+=@@@@@++@@@@@++@@@@@=+@@@@@==@@@@@++@@@@@++@@@@@+", +"+@@@@@+=@@@@@+=@@@@@+=@@@@@++@@@@@++@@@@@=+@@@@@==@@@@@++@@@@@++@@@@@+", +"+@@@@@+=@@@@@+=@@@@@+=@@@@@++@@@@@++@@@@@=+@@@@@==@@@@@++@@@@@++@@@@@+", +"@=====@@=====@@+++++@@+++++@@+++++@@+++++@@+++++@@=====@@+++++@@+++++@", +"+@@@@@+=@@@@@++@@@@@==@@@@@+=@@@@@+=@@@@@++@@@@@+=@@@@@++@@@@@+=@@@@@+", +"+@@@@@+=@@@@@++@@@@@==@@@@@+=@@@@@+=@@@@@++@@@@@+=@@@@@++@@@@@+=@@@@@+", +"+@@@@@+=@@@@@++@@@@@==@@@@@+=@@@@@+=@@@@@++@@@@@+=@@@@@++@@@@@+=@@@@@+", +"+@@@@@+=@@@@@++@@@@@==@@@@@+=@@@@@+=@@@@@++@@@@@+=@@@@@++@@@@@+=@@@@@+", +"+@@@@@+=@@@@@++@@@@@==@@@@@+=@@@@@+=@@@@@++@@@@@+=@@@@@++@@@@@+=@@@@@+", +"@+++++@@=====@@+++++@@+++++@@=====@@+++++@@+++++@@=====@@+++++@@+++++@", +"#$$$$$##-----#;$$$$$;;$$$$$;;-----;;$$$$$;;$$$$$;;$$$$$;;$$$$$;;$$$$$;", +"$#####$-#####$-#####$-#####$$#####$$#####-$#####--#####$$#####$$#####;", +"$#####$-#####$-#####$-#####$$#####$$#####-$#####--#####$$#####$$#####$", +"$#####$-#####$-#####$-#####$$#####$$#####-$#####--#####$$#####$$#####$", +"$#####$-#####$-#####$-#####$$#####$$#####-$#####--#####$$#####$$#####$", +"$#####$-#####$-#####$-#####$$#####$$#####-$#####--#####$$#####$;#####$", +";-----;#-----;;$$$$$;#$$$$$;;$$$$$;;$$$$$;;$$$$$;#-----;;$$$$$;;$$$$$;", +"$#####$-#####$$#####--#####$-#####$-#####$$#####$-#####$$#####$-#####$", +"$#####$-#####$$#####--#####$-#####$-#####$$#####$-#####$$#####$-#####$", +"$#####$-#####$$#####--#####$-#####$-#####$$#####$-#####$$#####$-#####$", +"$#####$-#####$$#####--#####$-#####$-#####$$#####$-#####$$#####$-#####$", +"$#####$-#####$$#####--#####$-#####$-#####$$#####$-#####$$#####$-#####$", +"#$$$$$##-----#;$$$$$;;$$$$$;#-----;;$$$$$;;$$$$$;#-----;;$$$$$;#$$$$$;", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +"+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+.+ ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +">@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@>@> ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +",')!~{]^/(_:<[}|1234567890abcdefghijklmnopqrstuvwxyzABCD ", +" ", +" "}; diff --git a/wmlongrun/stamp-h.in b/wmlongrun/stamp-h.in new file mode 100644 index 0000000..9788f70 --- /dev/null +++ b/wmlongrun/stamp-h.in @@ -0,0 +1 @@ +timestamp -- 2.7.4 -- To unsubscribe, send mail to [email protected].