Re: Re: Tyvek ground cloth
shari <[email protected]> Mon, 10 Jun 2013 15:46:08 -0400
| Newsgroups | gmane.culture.backpacking.light |
|---|---|
| Message-ID | <CADVqcM8i=MsJ3bBfzYpHZnCaDcc_Mt83sZdg72bP7rnQ+GyN2Q@mail.gmail.com> |
I've had the same experience with my piece of Tyvek, except I've not had it quite so long. But it's been a good piece of gear and has held up very well, and I've never had issues of water seeping through it. I have well over 1000 AT miles on it, along with hundreds of non-AT miles, and probably close to 400 nights of use, all told. A hiking buddy of mine is looking for a lighter-weight alternative to what he currently carries and has been coveting my precious Tyvek, so I thought I'd try to find the person I bought from before. Finding Tyvek from a construction site isn't nearly as easy as it used to be. On Mon, Jun 10, 2013 at 2:56 PM, Bill Bradshaw <[email protected]> wrote: > ** > > > ----- Original Message ----- > From: "jrwooden" <jim-TZ6VOGY/[email protected]> > To: <[email protected]> > Sent: Saturday, June 08, 2013 4:15 PM > Subject: [BackpackingLight] Re: Tyvek ground cloth > > Does anyone know which type tyvek this is? > http://www.materialconcepts.com/store/products/8-x-10-omnicovr-original > > Decent price, or can it be had for less? > > Thanks, > Jim > > --- In [email protected], John Ladd <johnladd@...> wrote: > > > > Bruce - Stick with the polypro if it works for you, but the > > fabric-like > > Tyvek (1443R) eliminates the noise problem found with the more > > plastic-like > > Tyvek grades used for waterproofing buildings. A one-time wash of the > > Tyvek > > in a washing machine also helps. > > > > On Fri, Jun 7, 2013 at 6:01 AM, Bruce Ivey <bivey@...> wrote: > > > > > ** > > > > > > > > > Re: Tyvek ground cloth > > > > > > I tried using Tyvek for a ground cloth and found it annoyingly noisy > > > and > > > slippery. Every little movement while in the sleeping bag made an > > > awful > > > crackly noise, and even a slight pitch to the ground made the whole > > > tent > > > slide downhill. Polypro is much more satisfactory. > > > > > > Bruce Ivey > > I have the white Tyvek with T05007 printed on it. I have been using it > since 2000 and have used it hundreds of times and it is still going > strong. Put the printed side against the ground. What I do when I get > home is wash it off with a hose and dry it and put it away. It is a 4 > feet by 6 feet in size and I use it with all my tents backpacking, sea > kayaking, and pack rafting. I got it for free by stopping by a > construction site and asking if they had any spare scraps. > > <Bill> > > Brought to you from Anchorage, Alaska. > > >