Re: Envelope #10 and HP 1522nf Printer Margins

On Mon, Nov 15, 2010 at 02:12:53AM -0900, Roger wrote:
> 

I dunno if this is in response to my posting a few days ago about envelope
printing in Abiword or not, but...

> 
> Here's what I have to do to create an envelope within Abiword with proper
> margins for printing on Envelope #10 media. Although I'm seeing better success
> printing envelopes with Abiword vs. OpenOff, Abiword pushes the margins
> slightly to the right on envelope printing on my HP 1522nf laser printer.
> 
> (OpenOff would force margins too far to the left, etc, but finally got it
> working by changing the print direction buttons to non-standard options.  After

Odd, I have no trouble printing a #10 envelope, at all, with OOo. I choose
#10 envelope paper size, set to landscape, tweak the margins a little
(to make the gap at the top and left edge smaller), then start typing.
once I'm done I hand-feed an envelope, hit print, and voila.  I've done
this on my Brother laser at home and several bigger HP laserjets at
work. The particular printer I was using with abiword is a HP Laserjet
1200, and I don't recall if I've ever used OOo with it for envelope
printing.

But, thanks for the recipe you've found to work with Abiword, I'll give
it a try.

> years of fiddling and now this hype, I'm finally migrating to Abiword, but not
> before using VIM for awhile. ;-)
> 
> 
> To create an envelope within Abiword:
> 1) File > Page Setup and configure for Envelope #10
> 2) Configure for landscape printout
> 
> Set proper return address margins
> 1) Move left margin to 3.125“
>     This fixes printing the envelope too far to the right!
> 2) Move top margin to 0.1875“
>     Move the address further to the top as it looks better closer to the edge.
> 
> Set proper addressee margins
> 1) Move left indent to 3.50“
>     Centers the addressee to compensate for correcting the left margin above.
> 
> Configure printer to defaults by setting "Default paper size: Letter" and "Tray 1
> size/type: Any".
> 
> Choose print, leaving Page Setup at their defaults (Paper type/source:
> Unspecified/Auto).  Select OK to print.
> 
> I'm still hunting each time on how to create an envelope if I haven't done this
> operation for awhile.  MS Word & OpenOff had "creating evelope" menu links for
> this common task.  But, once I create an envelope, I've saved it and used it
> for the next envelope task.
> 
> 
> One side note, I'm not seeing keyboard keys for "increasing and decreasing
> indent".  A common task performed within VIM here, is shift+v, cursor up/down
> to select text lines, shift+< or shift+> to increase/decrease indents.  Of
> course, prefix shift+</> with a number to increase indents ($number * 5
> chars).
> 
> When typing, always like to keep fingers on the keyboard, refraining from going
> to a mouse.
> -- 
> Roger
> http://rogerx.freeshell.org/
> -----------------------------------------------
> To unsubscribe from this list, send a message to
> [email protected] with the word
> unsubscribe in the message body.

-- 
---- Fred Smith -- [email protected] -----------------------------
                       I can do all things through Christ 
                              who strengthens me.
------------------------------ Philippians 4:13 -------------------------------
-----------------------------------------------
To unsubscribe from this list, send a message to
[email protected] with the word
unsubscribe in the message body.