Re: bug#76279: 31.0.50; ERC 5.6.1-git: scrolltobottom-mode broken on certain global text scaling

Trevor Arjeski <[email protected]> writes:

> Eli Zaretskii <[email protected]> writes:
>
>>> From: Trevor Arjeski <[email protected]>
>>> Date: Fri, 14 Feb 2025 10:24:12 +0300
>>> 
>>> Minimal configuration:
>>> (use-package erc
>>>   :config
>>>   (setopt erc-modules '(scrolltobottom))
>>>   (erc-scrolltobottom-mode))
>>> 
>>> 1. Use above config to ensure scrolltobottom module is loaded
>>> 2. Start erc with a connection to libera (M-x erc-tls)
>>> 3. C-x 1 on the erc buffer window to make it the sole window
>>> 4. Once the Libera buffer is loaded, this should be a sufficient number
>>> of lines to trigger scroll to bottom.
>>> 5. On some resolutions or window size this may be enough to see that the
>>> input line (ERC>) is not at the bottom of the window, but in the
>>> middle. If not, proceed to step 6.
>>> 6. Invoke (global-text-scale-adjust) using C-x C-M-= and continue to
>>> press the "=" key until you can notice that the input line jumps to the
>>> center of the window.
>>
>> Aren't you supposed to set erc-input-line-position to -1 if you want
>> the prompt to always be at the last line?
>
> Does not seem to make a difference for me and also in the
> `erc-scroll-to-bottom' procedure of erc-goodies.el it seems to already
> do that by default with `(or erc-input-line-position -1)', right?

Does configuring `erc-scrolltobottom-all' to t help any? (Note that you
must do so before connecting or else cycle the module's minor mode.)