bug#2947: 23.0.91; font-lock-mode will hang emacs on this file (both on Windows/Linux)
Bao Haojun <[email protected]>
| Newsgroups | gmane.emacs.bugs,gmane.emacs.pretest.bugs |
|---|---|
| Message-ID | <[email protected]> |
The file is attached, the offending character is the last `"' character on line 117:
{"get micco", MICCO_TEST, "B<B>B>", "0x1", "},
If I run M-x font-lock-mode, emacs will hang. I have also tested on Linux emacs.
In GNU Emacs 23.0.91.1 (i386-mingw-nt5.1.2600)
of 2009-02-27 on SOFT-MJASON
Windowing system distributor `Microsoft Corp.', version 5.1.2600
configured using `configure --with-gcc (3.4)'
Important settings:
value of $LC_ALL: nil
value of $LC_COLLATE: nil
value of $LC_CTYPE: nil
value of $LC_MESSAGES: nil
value of $LC_MONETARY: nil
value of $LC_NUMERIC: nil
value of $LC_TIME: nil
value of $LANG: CHS
value of $XMODIFIERS: nil
locale-coding-system: cp936
default-enable-multibyte-characters: t
Major mode: C++/l
Minor modes in effect:
auto-image-file-mode: t
shell-dirtrack-mode: t
mouse-wheel-mode: t
file-name-shadow-mode: t
blink-cursor-mode: t
global-auto-composition-mode: t
auto-composition-mode: t
auto-encryption-mode: t
auto-compression-mode: t
line-number-mode: t
transient-mark-mode: t
abbrev-mode: t
Recent input:
<help-echo> C-x C-f s r c / c l i <M-backspace> e n
g <M-backspace> a l c <return> j s <return> <return>
c l i <return> M-x M-p C-k f o n t <tab> l o <tab>
m o <tab> <return> C-e C-b C-b " C-x C-s M-x C-g M-x
g l o b <tab> f o n <tab> <return> M-x r e p o r <tab>
<return>
Recent messages:
Loading paren...done
Loading q:/.session...done
For information about GNU Emacs and the GNU system, type C-h C-a.
Searching for `cli'....
Loading vc-svn...done
Font-Lock mode disabled
Saving file q:/src/alchemy/JSC-fork-dll/AlchemyLib/cli.cpp...
Wrote q:/src/alchemy/JSC-fork-dll/AlchemyLib/cli.cpp
Quit
Global-Font-Lock mode disabled
#include "stdafx.h"
#include "alchemy_internal.h"
#include <afxtempl.h>
#include "cli.h"
#define ENABLE_BHJDEBUG
#include "bhjdebug.h"
typedef enum
{
FACTORY_ID = 0x001,
GPIO_TEST = 0x003,
REGISTER_TEST = 0x004,
ADC_TEST = 0x005,
REBOOT_TEST = 0x006,
CAMERA_TEST = 0x007,
BLUETOOTH_TEST = 0x008,
TESTINFO = 0x009,
ATPARSER_TEST = 0x00a,
VIBRATOR_TEST = 0x00b,
POWERREASON_TEST=0x00c,
VOLTAGE_TEST = 0x00d, /*get real voltage by ADC */
TEMPRATURE_TEST = 0x00e, /*get real temprature by ADC */
CHARGETYPE_TEST =0x00f,
GSENSOR_TEST = 0x010,
MICCO_TEST = 0x011,
LCDBACK_TEST = 0x012,
KEYBACK_TEST = 0x013,
TOUCH_POINT =0x014,
KEY_INPUT = 0x015,
ONLY_Key = 0x031,
LGSENSOR_TEST = 0x01c,
GSENSOR_INFO = 0x01d,
/* DDR test commands */
Ddr_TEST = 0x01f,
/* LCD test commands */
LCD_TEST = 0x20,
/* T-FLASH card detect*/
CARD_TEST =0x021,
/* charge status */
CHARGESTATUS_TEST = 0x022,
/* MAT FILE Read AND write */
MAT_TEST = 0x023 ,
/*audio hardware test */
AUDIO_TEST = 0x024,
/* ADC calibration &NVM block operation related test commands*/
CALI_TEMP = 0x016, /*only operation on filesystem file*/
CALI_VOLT = 0x017, /*only operation on filesystem file*/
NVM_TEST = 0X018,
VOLT_TEST = 0x019, /*read /write from filesystem to NVM block*/
TEMP_TEST = 0x01a, /*read /write from filesystem to NVM block*/
RF_TEST = 0x01b, /*read /write from filesystem to NVM block*/
TESTINFO_TEST =0x025,/*read /write from filesystem to NVM block*/
FACTORYID_TEST=0x026,/*read /write from filesystem to NVM block*/
MATFLAG_TEST=0x027,/*read /write from filesystem to NVM block*/
/*touch panel test */
PANEL_TEST = 0x028,
/*empty test */
EMPTY_TEST = 0x029,
/* bluetooth test commands */
BT_TEST = 0x050,
BTNVM_TEST= 0x051,
BT_INQUIRE= 0x052,
BT_TESTMODE =0x053,
BT_KILL=0x054,//kill the "/system/bin/hciattach" process after enter into BT Test Mode /BTINQUIRE
/*camera test commands */
CAMERA_PREVIEW = 0x060,
LAUNCH_CAMERA = 0x61,
I2C_TEST = 0x01e,
/*CMMB test commands */
IF101_TEST= 0x070,
INNO_DEVICE= 0x071, /*enter or exit CMMB test mode*/
Signallock_TEST = 0x72,
Sensitive_TEST = 0x73,
IF101_SPI_TEST = 0x74,
IF101_SET_FREQ = 0x75,
LAUNCH_TV = 0x76,
/* GPS test commands */
GPS_TEST = 0x80,
GPS_LOCATION=0x81,
GPS_MESSAGE=0x82,/*only get NEMA Message*/
GPS_LOCA_MESSAGE=0x83,/*only get Location Message*/
GPS_CHANGE_MODE=0x84,/*Change between hot mode and code mode*/
/* SPARK */
SPARK_KEY=0x90,/*TEST KEY INPUT*/
/* Key Monitor */
KEY_MONITOR=0x91,
/* Sensor Monitor */
SENSOR_MONITOR=0x92,
/* Set/Get LPR SMS report flag */
SMS_FLAG =0x93,
/* Set/Get LPR livetime period */
LIVETIME_PERIOD = 0x94,
/* Set/Get EFEM feature flag */
EFEM_FLAG =0x95,
DIAG_LAUNCH=0x96,
GET_RDNVM =0x9a,
DIAG_EXT_INTERFACE=0x9b,
/*to set /get element config value */
NVM_Element=0x9c,
/*to set /get phase data : */
NVM_PHASE =0x9d,
/*Common set/get Bit config element value*/
NVM_BITCONFIG =0x9e,
/* Version */
VERSION = 0x039,
/* bp only handler */
BP_ONLY = 0xFFFF
} TC_AP_FSM_EVENT_OPCODE_T;
typedef unsigned char u8;
typedef unsigned short u16;
typedef struct{
const char *cmdName;
int opCode;
const char *inputSpec; // datatype: BHIOoF, how: <>*!
const char *fixedInput;
const char *description;
} testCmd_T;
//< means from the fixedInput,
//> means from user provided input,
//! means arbitrary value is acceptable, so we just use 0,
//* means fill with a string
static testCmd_T cmdMap[] = {
{"version", VERSION, "B<", "0x12", "Read software version of the phone"},
{"get factory_id", FACTORY_ID, "B<", "0x11", "Read FactoryId of the phone"},
{"set factory_id", FACTORY_ID, "B<B*", "0x00", "Update FactoryId of the phone" },
{"atCommand", ATPARSER_TEST, "B*", "", "Test an AT command" },
{"get gpio", GPIO_TEST, "B<H>B!", "0x1", "Get GPIO, the u16 argument is the GPIO number"},
{"set gpio", GPIO_TEST, "B<H>B>", "0x2",
"Set GPIO, the u16 is GPIO number, the u8 is GPIO setting\n"
"the meaning of bit 7-0:\n"
" level : 1, //0:low,1:High\n"
" in_out: 1, //0:input, 1:output\n"
" pullup: 1, //0:no pullup,1:pullup\n"
" pulldown: 1, //0:no pulldown,1:pulldown\n"
" tri_state: 1, //0:anit_tristate,1:tristate\n"
" reserved: 3;\n"
},
{"get register", REGISTER_TEST, "B<I>I!", "0x1", "Read register value, u32 is register number. Use with caution!"},
{"set register", REGISTER_TEST, "B<I>I>", "0x2", "Write register, first u32 is register number, second is value"},
{"get adc", ADC_TEST, "B>H!", "", "Read A/D converter value, u8 is AD number" },
{"reboot poweroff", REBOOT_TEST, "B<", "0x0", "reboot to poweroff mode"},
{"reboot factory", REBOOT_TEST, "B<", "0x1" "reboot to factory mode (minimal applications will start, so boot/test is faster)"},
{"reboot normal", REBOOT_TEST, "B<", "0x2", "reboot, the `Normal' reboot"},
{"reboot flash", REBOOT_TEST, "B<", "0x3", "reboot to flash mode"},
//{"camera test", //???
{"launch camera", LAUNCH_CAMERA, "", "", "lauch camera"},
//{"bluetooth test", //???
//{"get info", TESTINFO, "B<", "0x11"}, //???
//{"set info", TESTINFO, "B<B*", "0x0"}, //???
{"get gsensor", GSENSOR_TEST, "B<B>B!", "0x1", "get gravity sensor value, u8 is the gsensor number"},
{"set gsensor", GSENSOR_TEST, "B<B>B>", "0x2", "set gsensor value, first u8 is the gsensor number, second is value"},
{"get micco", MICCO_TEST, "B<B>B>", "0x1", "},
{"set micco", MICCO_TEST, "B<B>B>", "0x2"},
{"vibrator on", VIBRATOR_TEST, "B<", "0x1"},
{"vibrator off", VIBRATOR_TEST, "B<", "0x2"},
//{"at test" //bhj: don't know what this means
{"get power reason", POWERREASON_TEST, "", ""},
{"get chargetype", CHARGETYPE_TEST, "B<", "0x1"},
{"set chargetype", CHARGETYPE_TEST, "B<B>", "0x2"},
{"get manual voltage", VOLTAGE_TEST, "B<", "0x0"},
{"get auto voltage", VOLTAGE_TEST, "B<", "0x4"},
{"get manual temperature", TEMPRATURE_TEST, "B<", "0x1"},//0x0?
{"get auto temperature", TEMPRATURE_TEST, "B<", "0x5"},
{"get lcdbl", LCDBACK_TEST, "B<B>", "0x1"},
{"set lcdbl", LCDBACK_TEST, "B<B>", "0x2"},
{"get keybl", KEYBACK_TEST, "B<B>", "0x1"},
{"set keybl", KEYBACK_TEST, "B<B>", "0x2"},
{"test touch", TOUCH_POINT, "", ""},
{"test keyinput",ONLY_Key,"",""},
{"get lprflag", SMS_FLAG, "B<", "0x1"},
{"set lprflag", SMS_FLAG, "B<B>", "0x2"},
{"get lprtime", LIVETIME_PERIOD, "B<", "0x1"},
{"set lprtime", LIVETIME_PERIOD, "B<B>", "0x2"},
{"get efemflag", EFEM_FLAG, "B<", "0x1"},
{"set efemflag", EFEM_FLAG, "B<B>", "0x2"},
{"get cali temperature",CALI_TEMP,"B<","0x1"},//add by Jason from here
{"get cali voltage",CALI_VOLT,"B<","0x1"},
{"set cali voltage",CALI_VOLT,"B<B*","0x2"},
{"store volt",VOLT_TEST,"B<","0x1"},
{"load volt",VOLT_TEST,"B<","0x2"},
{"store temp",TEMP_TEST,"B<","0x1"},
{"load temp",TEMP_TEST,"B<","0x2"},
{"store RF",RF_TEST,"B<","0x1"},
{"load RF",RF_TEST,"B<","0x2"},
{"store testinfo",TESTINFO_TEST,"B<","0x1"},
{"load testinfo",TESTINFO_TEST,"B<","0x2"},
{"store factoryid",FACTORYID_TEST,"B<","0x1"},
{"load factoryid",FACTORYID_TEST,"B<","0x2"},
{"store MATflag",MATFLAG_TEST,"B<","0x1"},
{"load MATflag",MATFLAG_TEST,"B<","0x2"},
{"camera preview on",CAMERA_PREVIEW,"B<","0x1"},
{"camera preview off",CAMERA_PREVIEW,"B<","0x2"},
{"get sensor",LGSENSOR_TEST,"B<","0x1"},
{"i2c test",I2C_TEST,"",""},
{"if101 test",IF101_TEST,"",""},
{"read bt",BT_TEST,"B<","0x1"},
{"write bt",BT_TEST,"B<B*","0x2"},
{"store btnvm",BTNVM_TEST,"B<B*","0x1"},
{"load btnvm",BTNVM_TEST,"B<","0x2"},
{"bt inquire",BT_INQUIRE,"",""},
{"bt testmode",BT_TESTMODE,"",""},
{"bt kill",BT_KILL,"",""},//ljs:not find the definition
{"launch tv",LAUNCH_TV,"",""},
{"ddr test",Ddr_TEST,"",""},
{"gps test",GPS_TEST,"B>",""},
{"lcd test",LCD_TEST,"B>",""},
{"card detect",CARD_TEST,"B>",""},
{"charge status",CHARGESTATUS_TEST,"B>",""},
{"audio test",AUDIO_TEST,"B>",""},
//data: 0x01: AUDIO_SD_PLAY
// 0x02: AUDIO_MICRO_TEST
// 0x03: AUDIO_EAR_TEST
{"save rd",GET_RDNVM,"B<B>","0x1"},
{"get diag_en",DIAG_LAUNCH,"B<","0x1"},
{"set diag_en",DIAG_LAUNCH,"B<B>","0x2"},
{"get diag_intf",DIAG_EXT_INTERFACE,"B<","0x1"},
{"set diag_intf",DIAG_EXT_INTERFACE,"B<B>","0x2"},
{"get element",NVM_Element,"I>B<","0x1"},
{"set element",NVM_Element,"I>B<o","0x2"},
{"get phase",NVM_PHASE,"I>B<","0x1"},
{"set phase",NVM_PHASE,"I>B<o>","0x2"},
{"get ap_panic_report",NVM_BITCONFIG,"I>B<","0x1"},
{"set ap_panic_report",NVM_BITCONFIG,"I>B<B>","0x2"},
{"opcode", -1, "o>", ""},
{"reliable data", 0x97, "F>", ""},
{NULL, 0, NULL, NULL},
};
static BOOL notOptionalCode(char c)
{
return (c!='*' && c!='?');
}
static BOOL isOptionalCode(char c)
{
return !notOptionalCode(c);
}
static BOOL isSingleOptional(char c)
{
return c=='?';
}
static BOOL isMultiOptional(char c)
{
return c=='*';
}
static unsigned long getLong(CString& strInput)
{
const char *s = strInput.GetBufferSetLength(strInput.GetLength());
char *firstInvalid = NULL;
long dataH = strtol(s, &firstInvalid, 0);
strInput.ReleaseBuffer();
strInput.Delete(0, firstInvalid-s);
strInput.TrimLeft();
return (unsigned long) dataH;
}
static int getLongCheck(CString& strInput, unsigned long& outLong)
{
outLong = 0;
strInput.TrimLeft();
strInput.TrimRight();
if (strInput.IsEmpty()) {
return -1;
}
int len = strInput.GetLength();
outLong = (unsigned long)getLong(strInput);
if (len == strInput.GetLength()) {
return -1;
}
return 0;
}
static int getB(CString& strInput, CU8Array& dataArr)
{
unsigned long outLong = 0;
if (getLongCheck(strInput, outLong) < 0) {
return -1;
}
unsigned char data = (unsigned char)outLong;
dataArr.Add(data);
return 0;
}
//'H' stands for a short
static int getH(CString& strInput, CU8Array& dataArr)
{
unsigned long outLong = 0;
if (getLongCheck(strInput, outLong) < 0) {
return -1;
}
unsigned short data = (unsigned short) outLong;
//big endian or little endian?
dataArr.Add(data&0xff);
dataArr.Add(data>>8);
return 0;
}
static int getI(CString& strInput, CU8Array& dataArr)
{
unsigned long outLong = 0;
if (getLongCheck(strInput, outLong) < 0) {
return -1;
}
unsigned int data = (unsigned int)outLong;
dataArr.Add(data&0xff); //获取int的低位字节
dataArr.Add((data>>8) & 0xff); //获取int的第二个字节
dataArr.Add((data>>16) & 0xff); //获取int的第三个字节
dataArr.Add((data>>24) &0xff); //获取int的第四个字节
return 0;
}
static int getF(CString& strInput, CU8Array& dataArr)
{
strInput.TrimLeft();
strInput.TrimRight();
FILE* fp = fopen(strInput, "rb");
if (fp == NULL) {
urgTrace("Error: %s open failed", (const char *)strInput);
return -1;
}
fseek(fp, 0, SEEK_END);
DWORD dwLength = ftell(fp);
rewind(fp);
char *buff = (char *)calloc(dwLength, 1);
DWORD numRead = 0;
for (;;) {
numRead += fread(buff+numRead, 1, dwLength, fp);
if (numRead == dwLength)
break;
}
ASSERT(numRead == dwLength);
for (DWORD i=0; i<dwLength; i++) {
dataArr.Add(buff[i]);
}
free(buff);
fclose(fp);
return 0;
}
#define AppendFormat(s, fmt) do { \
CString tmp_asfd; \
tmp_asfd.Format fmt; \
s+=tmp_asfd; \
} while (0)
static CString getFormat(const char *dC /* i.e., inputSpec, such as "BB*" */)
{
CString format;
for (int i=0; dC[i]; i++) {
if (dC[i]=='B' && notOptionalCode(dC[i+1])) {
continue;
} else if (dC[i]=='B' && isMultiOptional(dC[i+1])) {
i++;
format += "[string] ";
} else if (dC[i]=='H' && isSingleOptional(dC[i+1])) {
i++;
format += "[uint16] ";
} else if (dC[i]=='I' && isSingleOptional(dC[i+1])) {
i++;
format += "[uint32] ";
} else if (dC[i]=='B' && isSingleOptional(dC[i+1])) {
i++;
format += "[uint8] ";
} else if (dC[i]=='O' && notOptionalCode(dC[i+1])) {
format += "[uint32 (as opcode)] [uint8]... ";
} else if (dC[i]=='F' && notOptionalCode(dC[i+1])) {
format += "[filename] ";
} else if (dC[i]=='o' && notOptionalCode(dC[i+1])) {
format += "[uint8]... ";
}
}
if (format.IsEmpty()) {
format += "no args";
}
format += "\r\n";
return format;
}
static void commands()
{
CString helpStr("\r\nCommands:\r\n--------------------------------\r\n\r\n");
for (int i=0; cmdMap[i].cmdName!=NULL; i++) {
CString cmdName(cmdMap[i].cmdName);
AppendFormat(helpStr, ("%-25s : "
"opcode 0x%04x : "
"%s", cmdName,
(unsigned short)cmdMap[i].opCode,
getFormat(cmdMap[i].inputSpec)));
}
urgTrace("%s", helpStr);
}
static void help()
{
CString helpStr("\r\nHelp:\r\n--------------------------------\r\n\r\n"
"You can type the following to get more infomation:,\r\n"
"\r\n"
" help: dislay this help\r\n"
" todo: display to-do in this tool\r\n"
" bugs: display bugs/defects known\r\n"
" commands: display a list of available commands\r\n"
"\r\n"
"When you type `commands`, the commands are displayed as `Command : Args`,\r\n"
"Leading and trailing spaces in a command is ignored,\r\n"
" for e.g., `set keybl 255` is equal to ` set keybl 255 `\r\n"
"but, space in a command is not,\r\n"
" for e.g., `get keybl` is ok, but `get keybl` is not a valid command\r\n"
"for those command that want one or more u8/u16/u32 argument, \r\n"
"if none or less that required argument is supplied, a default 0 is used\r\n"
" for e.g., `set register 0x33 0x44` takes 2 args\r\n"
" 0x33 is register number, 0x44 is the value, \r\n"
" i.e., register 0x33 will be set to 68 (decimal value of 0x44) \r\n"
" But, if you run `set register`, then register 0 will be set to 0\r\n"
"And, you can use 0xf/017/15 to mean the same INT, 15.");
urgTrace("%s", helpStr);
}
static void todo()
{
CString todoStr("\r\nTodo:\r\n--------------------------------\r\n\r\n"
" 1. make the interface more user-friendly\r\n"
" for e.g., get gpio should show if the i/o is pu/pd, etc.\r\n"
" 2. implement a better help system\r\n"
" 3. provide a means to clear or save the log to a file\r\n"
" 4. provide a means to save the commands executed to a file\r\n"
" 5. implement execution of commands from the saved commands file\r\n"
" 6. fix bugs");
urgTrace("%s", todoStr);
}
static void bugs()
{
CString bugsStr("\r\nBugs:\r\n--------------------------------\r\n\r\n"
" 1. connection is broken after you disconnect the usb cable\r\n"
" and must restart the application to reconnect\r\n"
" 2. you must connect the usb cable before you start the application\r\n"
" 3. many other bugs, some are even undiscovered yet\r\n"
" Please help report bugs/suggestions to [email protected]");
urgTrace("%s", bugsStr);
}
static void printResult(CU8Array& result)
{
CString recvTrace("\"");
if (result.GetSize()==0) {
return;
}
for (int k=0; k<result.GetSize(); k++) {
if (isprint(result[k])) {
recvTrace += result[k];
} else {
CString tmp;
tmp.Format("\\x%02x", result[k]);
recvTrace += tmp;
}
}
recvTrace+='"';
urgTrace("%s", recvTrace);
recvTrace = " in hex: ";
for (k=0; k<result.GetSize(); k++) {
CString tmp;
tmp.Format("0x%02x ", result[k]);
recvTrace += tmp;
}
dbgTrace("%s", recvTrace);
return;
}
static BOOL isFromUser(char where)
{
return where == '>';
}
static BOOL isFromFixed(char where)
{
return where == '<';
}
static BOOL isArbitrary(char where)
{
return where == '!';
}
static BOOL isMultiple(char where)
{
return where == '*';
}
static int getArg(CU8Array& dataArr, CString& strUserInput, CString& strFixedInput, char dataType, char where)
{
if (dataType == 'B') {
if (isFromUser(where)) {
return getB(strUserInput, dataArr);
} else if (isFromFixed(where)) {
return getB(strFixedInput, dataArr);
} else if (isArbitrary(where)) {
return getB(CString("0"), dataArr);
} else if (isMultiple(where)) { //the rest of the user-input is consumed
for (int k=0; k<strUserInput.GetLength(); k++) {
dataArr.Add(strUserInput[k]);
}
strUserInput = ""; //empty user-input
return 0;
}
} else if (dataType == 'H') {
if (isFromUser(where)) {
return getH(strUserInput, dataArr);
} else if (isFromFixed(where)) {
return getH(strFixedInput, dataArr);
} else if (isArbitrary(where)) {
return getH(CString("0"), dataArr);
} else {
urgTrace("Error: alchemy bug detected, code is %c %c", dataType, where);
return -1;
}
} else if (dataType == 'I') {
if (isFromUser(where)) {
return getI(strUserInput, dataArr);
} else if (isFromFixed(where)) {
return getI(strFixedInput, dataArr);
} else if (isArbitrary(where)) {
return getI(CString("0"), dataArr);
} else {
urgTrace("Error: alchemy bug detected, code is %c %c", dataType, where);
return -1;
}
} else if (dataType == 'o') {
strUserInput.TrimLeft();
CString savedCommand = strUserInput;
for (int k=0;;k++) { //infinite loop, k is only for debugging
if (strUserInput.IsEmpty()) {
break;
}
getB(strUserInput, dataArr);
if (strUserInput == savedCommand) {
urgTrace("invalid arguments, `%s'", savedCommand);
return -1;
}
strUserInput.TrimLeft();
savedCommand = strUserInput;
}
return 0;
} else if (dataType == 'F') {
if (!isFromUser(where)) {
urgTrace("Error: alchemy bug detected, code is %c %c", dataType, where);
}
return getF(strUserInput, dataArr);
} else {
urgTrace("Error: alchemy bug detected, code is %c %c", dataType, where);
return -1;
}
return 0;
}
int cliCarryOut(const char *sCommand)
{
return cliCarryOut(CString(sCommand));
}
int cliCarryOut(const CString& sCommand)
{
CU8Array result;
return cliCarryOut(sCommand, result);
}
//resolve the command send by IDC_EXEC_COMMAND
int cliCarryOut(const CString& sCommandConst, CU8Array& result)
{
if (alchemyInited == FALSE) {
urgTrace("Must call InitAlchemyLib first!\n");
return -1;
}
//we need to change the input string, so make a copy to remove the `const'
CString sCommand = sCommandConst;
sCommand.TrimLeft();
sCommand.TrimRight();
for (int i=0; cmdMap[i].cmdName; i++) {
if (sCommand.Find(cmdMap[i].cmdName) == 0) {
const char *inputSpec = cmdMap[i].inputSpec;
const char *fixedInput = cmdMap[i].fixedInput;
int opcode = cmdMap[i].opCode; // this will change if cmd is "opcode"
//so that only args to the cmd is in sCommand
sCommand.Delete(0, strlen(cmdMap[i].cmdName));
sCommand.TrimLeft();
CString strUserInput = sCommand;
CString strFixedInput = fixedInput? fixedInput : "";
CU8Array dataArr; //empty at first
//handle opcode first:
if (opcode < 0) {
opcode = getLong(strUserInput);
}
for (int j=0; inputSpec[j]; j=j+2) {
int n = getArg(dataArr, strUserInput, strFixedInput, inputSpec[j], inputSpec[j+1]);
if (n < 0) {
urgTrace("Error: don't know how to parse the input string:\n %s", (const char*)sCommandConst);
}
}
if (strUserInput.GetLength()) {
urgTrace("Error: argument parse failed, `%s' is remaining in the command string", strUserInput);
return -1;
}
BYTE recv[1024] = {0};
int nRecv = 0;
CString sendTrace("send: \"opCode ");
CString tmp;
tmp.Format("0x%08x,data: ", opcode);
sendTrace+=tmp;
for (int k=0; k<min(10,dataArr.GetSize()); k++) {
CString tmp;
tmp.Format("0x%02x ", dataArr[k]);
sendTrace+=tmp;
}
if (dataArr.GetSize()>10) {
sendTrace+="...";
}
dbgTrace("%s", sendTrace);
int ret = getConnection()->UC_Do3rdCommand(opcode,
dataArr,
result,
cmdMap[i].cmdName);
printResult(result);
if (ret < 0) {
infoTrace("`%s`: failed!", cmdMap[i].cmdName);
return -1;
} else {
infoTrace("`%s`: success!", cmdMap[i].cmdName);
return 0;
}
}
}
if (sCommand.Find("help") == 0) {
help();
} else if (sCommand.Find("todo") == 0) {
todo();
} else if (sCommand.Find("bugs") == 0) {
bugs();
} else if (sCommand.Find("commands") == 0) {
commands();
} else {
urgTrace("%s", sCommand+=": unknown command");
}
return 0;
}