RE: VECTOR: TECH: Major Havoc

"Joe" <[email protected]>
Newsgroups gmane.games.arcade.vector
Message-ID <[email protected]>
Yep, no can do.. Maybe Clay was just mistaken or looking for more repairs :)
 
You can still use your scope on the test points on the board to see the image... Or, pull the X and Y signals from the harness and alligator clip them to the points on the boards. You will get an image.
 
IMHO for your problem, I would most likely start tracing your X and Y back to the outputs from the dac with a scope (actually first opamps.) I think you may find that you have a bad DAC or something broken on the digital side. Tough to say though.. First use your scope.
 
A certain Space Duel board comes to mind that had a similar problem and I believe I found a bad DAC in combination with a LF13201. IIRC of course, that was years ago.
 
JB

________________________________

From: [email protected] on behalf of Steve P.
Sent: Tue 1/4/2005 12:13 PM
To: [email protected]
Subject: Re: VECTOR: TECH: Major Havoc



Thanks for the reply.  I thought that it sounded odd plugging MH into SD w/o
an adapter, thus the post.   :)


-Steve P.


----- Original Message -----
From: "Tom McClintock" <[email protected]>
To: <[email protected]>
Sent: Tuesday, January 04, 2005 12:55 PM
Subject: Re: VECTOR: TECH: Major Havoc


>
>
> Steve P. wrote:
>>
>> Is it possible that the Tempest adapter card might have a bad chip?  I
>> know it controls the pincoushining, but is there more to it than that?
>
> The adapter PCBs only do two things as you have noted - remap the pinouts
> and provide pincoushion correction.
>
>
>
>> Also, can I plug the MH PCB into a Space Duel harness w/o the adapter
>> card as a way of testing?  I searched Dejanews and Clay Cowgill mentions
>> that you can plug the MH into a SD harness with no ill effect.
>
> Uh, you can take a quick look a thte pinouts for each and see that the
> video outputs on Major Havoc are quite different than either Space Duel or
> Gravitar. So, I would say no to this question.
>
> Here are some details on the conversion PCBs that I cobbeled together
> earlier this year:
> http://www.ionpool.net/arcade/mh/major_havoc_conversion.txt
>
>
>
> tm
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> [email protected]
>


---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to [email protected]
winmail.dat (application/ms-tnef, 5.6 KB) - not displayed
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.