Re: VECTOR: asteroids sound problem cont...

In the end, i connected a speaker straight to the game pcb with croc clip 
jump leads, and i had sound, so i checked the wiring again, 3 times in 
total, i re mtere'd the speaker and the pot, but everything meter'd ok, in 
the end just out of frustration, i changed the speaker, and it worked !! The 
speaker was metering ok but was in fact duff! anyone had this before ?
Now that i have sound working, i am missing the shooting sound and the 
flying saucer sounds but all the rest are there...



Pinx
----- Original Message ----- 
From: "Christopher X. Candreva" <[email protected]>
To: <[email protected]>
Sent: Wednesday, January 19, 2005 6:05 PM
Subject: Re: VECTOR: asteroids sound problem cont...


> On Wed, 19 Jan 2005, Pinx wrote:
>
>> i have replaced the TDA2002 on my AR1 and i have recapped it etc.. the
>> speaker, pot and wiring in the cab all meter ok, but i still have no
>> sound. I have two working game pcbs but i still have the same fault with
>> either pcb, now maybe i am just unlucky and both game pcbs have no sound,
>> so does anyone know, which chips on the game pcb control sound ?
>
> Check the schematic ? :-)  The sounds are analog circuits. I believe there
> is also an audio out test point you can check
>
> ==========================================================
> Chris Candreva  -- [email protected] -- (914) 967-7816
> WestNet Internet Services of Westchester
> http://www.westnet.com/
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at 
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to 
> [email protected]
>