Re: VECTOR: Replaceing G-80 cage connector
"Christopher X. Candreva" <[email protected]>
| Newsgroups | gmane.games.arcade.vector |
|---|---|
| Message-ID | <[email protected]> |
On Fri, 4 Feb 2005, Curtis H. Wilbar Jr. wrote: > If you can ... might as well find some parts from a sega cab rather > than the conversion stuff. Sega used large multipin connectors that > are easier to work and nicer than that fingerboard thing... yuk. > > In genuine sega's there are three connector blocks with wiring that then > connects to the boards inside the cage. Nice -- that's exactly what I planed on having, three different connectors for the monitor, control panel, and coin door. I've never seen a dedicated, so I didn't realize they were different. Is there a manual, parts list, picture, anything of the dedicated version anywhere ? All the manuals I've downloaded are for the conversion, and show the fingerboard. ========================================================== Chris Candreva -- [email protected] -- (914) 967-7816 WestNet Internet Services of Westchester http://www.westnet.com/