Re: VECTOR: Black Widow CPO differences?
Tom McClintock <[email protected]>
| Newsgroups | gmane.games.arcade.vector |
|---|---|
| Message-ID | <[email protected]> |
http://joesarcade.com/games/Black%20Widow%20Marquees/black_widow_marquee.htm Steve P. wrote: > Hi all. > > I recently picked up a bare Black Widow control panel (well, no sticks, > and no buttons, but the wiring was intact). Anyhow, the overlay at the > time of purchase had several globs of what looked like paint on it so I > figured I'd grab a replacement overlay and restore the CP all of the way > before installing it. The repro overlay arrived yesterday and looks > stunning. > > The only problem that I have is that my control panel overlay varies a > bit from the repro. > > 1. The instruction box on the right side on my control panel is blue. > The same instruction box on the repro is green. > > 2. The web grid "rings" on my overlay are also different from the > repro. It has the following ring colors (from outer edge inward): > > blue, pink, orange, blue, blue, pink, yellow, blue, blue, pink orange. > > the repro has: > > purple, pink, orange, blue, purple, pink, yellow, green, purple, pink, > orange > > > Any ideas on why the color differences? I pulled out pics of the Black > Widow I owned back in '96 and it had the normal green in the overlay the > same as the repro and the ring coloring is the same as the repro.. I am > stumped. It does not appear to be caused by fading either. > > Here are some pics. Notice that the paint globs are gone from the used > control panel, I was able to get the paint off by using a small brass > wire brush. :) > > http://set-in-led.0catch.com/misc/bw-cp-front.jpg > http://set-in-led.0catch.com/misc/bw-cp-rear.jpg > http://set-in-led.0catch.com/misc/bw-tag.jpg > http://set-in-led.0catch.com/misc/bw-overlay.jpg > > Input would be appreciated. > > -Steve P. > > --------------------------------------------------------------------------- > ** Unsubscribe, subscribe, or view the archives at > http://www.vectorlist.org > ** Please direct other questions, comments, or problems to > [email protected] > > >