Re[2]: VECTOR: G80 non-conversion connectors

-----Original Message-----
From: "Christopher X. Candreva" <[email protected]>
To: [email protected]
Date: Fri, 18 Mar 2005 20:21:00 -0500 (EST)
Subject: RE: VECTOR: G80 non-conversion connectors

> 
> On Fri, 18 Mar 2005, Joe wrote:
> 
> > The Star Trek that I have plugs directly into the board set. No
> > fingerboard or top to the cage. I also have an extra top with
> 
> I hate Sega.
> 
> Page 104 of the dedicated manual shows three (what appear to be) molex 
> connectors J1, J2, and J3 mounted on a bracket on the outside of the card 
> cage: http://www.westnet.com/~chris/arcade/ST-p104.gif
> 
> Page 132, the cabinet wiring diagram, shows these three plus P9 for the 
> volume control assembly.
> http://www.westnet.com/~chris/arcade/ST-p104.gif
> 
> If the dedicated cage doesn't actually have these, but sends the wires in to 
> connect directly to all the cards in the cage -- then, uh, I dunno, I'll do 
> something else.
> 
>

my dedicated AstroBlaster had the bracket with the molex's on it.
(it had the fan fitted too, that's usually missing on used ones!)