Yasim hang/crash

Hi folks. I am new here, and don't know, if I am at the right place with the 
following problem:

I went ahead and modified an existing yasim flight model file (pa28-161.xml) 
to create a flight model for this (powered) glider:
http://www.alexander-schleicher.de/englisch/produkte/ask21mi/e_ask21mi_main.htm
(I learned to fly on the engine-less version of this plane, but as yasim seems 
to need an engine for its calculations, I thought myself quite lucky when I 
came across a powered version)

However I am not able to load the fdm into flightgear. I don't get an error 
message, flightgear just freezes. So I began tweaking settings and I recon I 
tracked the problem down to the wing section (swapping my wing with j3cub's 
wing worked). I've attatched the file, so you can have a look.

BTW: I took most of the geometrical data from this page:
http://www.alexander-schleicher.de/englisch/produkte/ask21/e_ask21_ansicht.htm

hope you have some ideas.

Thorben

_______________________________________________
Flightgear-flightmodel mailing list
[email protected]
http://mail.flightgear.org/mailman/listinfo/flightgear-flightmodel
2f585eeea02e2c79d7b1d8c4963bae2d