Re: AS332 L2: Main and tail rotor with Yasim

Hello HB-GRAL,

HB-GRAL schrieb am 27.04.2009 13:38:
> Hello YASIM-Rotor-Profis
>
> Some weeks ago I started a model of an Aerospatiale AS332-L2. Now I 
> tried to configure the main and tail rotor in the FDM. I was reading the 
> README.yasim from CVS carefully but I do not understand some parts of 
> calculating the rotors.
>
> I collected a lot of information needed (like NACA airfoil definition 
> etc.) but I still can not do some of the calculations. Can someone help 
> me calculating some of the yasim props for the rotors? I can send a list 
> of props I miss and also any technical data I collected.
>
>   
Just send them to me.
> Another question is how to configure the rotorgear right with two 
> engines and how to set the h- and v-stab correctly.
>
>   
Up to know the rotorgear does not support proper simulation of engines. 
You can just define the maximum torque of the engine (by defining the 
power). For a better engine simulation you need to simulate it with a 
nasal script, which calculates the maximum torque the engine can produce 
at the actual rpm. Or, by setting the target rpm of the rotorgear to a 
value higher than the real target (to overrule the rotorgear governor), 
you can calculate the actual torque of the engine with nasal and 
simulate a governor within nasal or let the pilot doing this.
> Is someone interested to help me making this as332?
>   
yes, me ;-)
> Thank you!
>
>   
Welcome,

best regards,
Maik


------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensign option that enables unlimited
royalty-free distribution of the report engine for externally facing 
server and web deployment.
http://p.sf.net/sfu/businessobjects