Re: Rotor ccw=0

Hi,

the alouette2 has ccw=3D0, too.
If you are starting with a ccw=3D1 setup, you need to adjust the =

force-direction of the tail rotor and inverse the collective input of =

the tail rotor.

Best regards,
Maik

Heiko Schulz schrieb am 08.05.2009 11:49:
> Hi,
>
> Ec130 in cvs has ccw=3D0. =

> nx/y/z and fx/y/z needs to my knowledge no change if ccw=3D0
> Regards
> HHS
>  still in work: http://www.hoerbird.net/galerie.html
> But already done: http://www.hoerbird.net/reisen.html
>
>
>
> ----- Urspr=FCngliche Mail ----
> Von: HB-GRAL <[email protected]>
> An: Flightgear Flightmodel List <[email protected]=
.net>
> Gesendet: Freitag, den 8. Mai 2009, 10:30:07 Uhr
> Betreff: [Flightgear-flightmodel] Rotor ccw=3D0
>
> Is there a sample of a rotors which have ccw=3D0? Bo105, EC135, S76c and =

> UH-1 have ccw=3D1. My AS-332 has ccw=3D0. I calculated and configured now=
 a =

> lot of things and the helo has a very good performance now with ccw=3D1 - =

> but ;-) I get confused now how I have to set nx/y/z and fx/y/z when I =

> set ccw to "0".
>
> Thanks for your answers - HBGreets
>
> -------------------------------------------------------------------------=
-----
> The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
> production scanning environment may not be a perfect world - but thanks to
> Kodak, there's a perfect scanner to get the job done! With the NEW KODAK =
i700
> Series Scanner you'll get full speed at 300 dpi even with all image =

> processing features enabled. http://p.sf.net/sfu/kodak-com
> _______________________________________________
> Flightgear-flightmodel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/flightgear-flightmodel
>
>
>
>       =

>
> -------------------------------------------------------------------------=
-----
> The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
> production scanning environment may not be a perfect world - but thanks to
> Kodak, there's a perfect scanner to get the job done! With the NEW KODAK =
i700
> Series Scanner you'll get full speed at 300 dpi even with all image =

> processing features enabled. http://p.sf.net/sfu/kodak-com
> _______________________________________________
> Flightgear-flightmodel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/flightgear-flightmodel
>
>   =



---------------------------------------------------------------------------=
---
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i7=
00
Series Scanner you'll get full speed at 300 dpi even with all image =

processing features enabled. http://p.sf.net/sfu/kodak-com