RE: : Reconciling Radius/Diameter SIP application

Hi,

Wrt to UTF8String in diameter and lack of support in RADIUS. Well would the
RADIUS type TEXT work for you?

Text is defined in 2865 as  "Text contains UTF-8 encoded 10646
      [7] characters"

> -----Original Message-----
> From: Miguel Garcia [mailto:[email protected]] 
> Sent: Thursday, November 11, 2004 8:55 AM
> To: Beck01, Wolfgang; Mari Carmen belinchon; Miguel-Angel 
> Pallares; ext Carolina Canales (ML/EEM); Pete McCann; 
> Rajaniemi Jaakko Matti; Tammi Kalle Tapani
> Cc: AAA mailing list; [email protected]
> Subject: [AAA-WG]: Reconciling Radius/Diameter SIP application
> 
> 
> Hi:
> 
> I am deliberately cross posting to AAA and Radius-ext because 
> I believe 
> this topic is of interest for both lists.
> 
> Yesterday Wolfgang and me met for a few hours and set the goal of 
> reconcile the Diameter SIP application and the RADIUS HTTP/SIP Digest 
> drafts. These are the drafts:
> 
> http://www.ietf.org/internet-drafts/draft-ietf-aaa-diameter-si
> p-app-04.txt
> 
> http://www.ietf.org/internet-drafts/draft-sterman-aaa-sip-04.txt
> 
> These are the main points we discuss. If you have any 
> comments, speak up 
> now, otherwise we will do the proposed changes in the relevant drafts:
> 
> 1- We agreed to modify the Diameter SIP application so that 
> it imports 
> the Digest-* AVP from the corresponding RADIUS attributes 
> address space. This came out of a comment from Jari Arkko, 
> and I think it is important 
> to avoid duplication of AVP/attributes.
> 
> As a side effect of the above, the SIP-Authentication-Context will 
> disappear in Diameter SIP app. This was a grouped AVP that only 
> contained a Digest-Entity-Body-Hash AVP. The latter will 
> remain (in the 
> RADIUS draft).
> 
> 2- We noticed a divergence in the Digest-Expected-Response AVP in 
> Diameter, which does not exist in RADIUS. RADIUS defines a Digest-HA1 
> attribute. The difference: Digest-HA1 contains H(A1), which 
> is computed 
> at the Radius server and sent to the Radius client, and it is used to 
> compute the expected response. In Diameter, the expected response is 
> computed at the Diameter server and sent to the client. This 
> assumes a 
> secure connection to avoid eavesdropping, which is not a problem for 
> Diameter that mandates IPsec or TLS. I think Diameter can go for the 
> Radius approach for compatibility reasons.
> 
> Proposal: Diameter will remove Digest-Expected-Response AVP and will 
> import Digest-HA1 from Radius.
> 
> 3- Radius does not define UTF8String data types, so all these 
> attributes 
> will remain as String, but the Radius draft will indicate 
> that contain a UTF8String verbally (this is required by HTTP and SIP).
> 
> 4- Currently here is a divergence on the definition of Digest-Stale 
> attribute: Diameter uses "true" and "false" (as per RFC2617), Radius 
> uses 1 and 0. We agreed to use "true" and "false" to avoid stupid 
> transcodings.
> 
> 5- Diameter indicates that the Digest-* AVPs contain the 
> quotes from/to 
> the Digest directive, Radius assumes (although does not indicate) no 
> quotes. We agreed that the Digest-* attributes do not need to include 
> the quotes from HTTP Digest parameters. So, there will be an explicit 
> indication that quotes are not part of the attribute value.
> 
> 6- We run into a problem when multiple SIP proxies are 
> authenticating the user, because at some point in time the 
> SIP request may contain several Proxy-Authorization headers. 
> The key here is the realm, it will be always different. If 
> different Diameter/Radius servers are 
> serving different realms, there is not problem. But, if a common 
> Diameter/Radius server is serving different realms, then the 
> server is 
> not able to determine which credentials should be evaluated.
> 
> We propose that the Diameter/Radius client MUST send only one set of 
> credentials at a time, those belonging to the served realm. This 
> requires to configure the Diameter/Radius client with the realm it is 
> serving. We will include some text indicating this case.
> 
> 7- Some of the attributes (e.g, Digest-Response and
> Digest-Response-Auth) had an artificial limit of 32 octets in 
> the value. While this value is correct for MD5 hashes, if in 
> the future other hashes are added to HTTP Digest, will run 
> into trouble. Proposal: don't restrict the length of a value.
> 
> 8- In the Radius document, scenario 1, we have a question. We 
> suspect that this scenario does not work if the Radius client 
> generates a nextnonce. The reason is that in the following 
> authentication, when the nextnonce becomes a nonce, the 
> Radius server will not recognize the nonce as locally 
> generated (it was generated by the Radius client), and 
> will reject the request with a "state=true". RFC 2617 seems 
> to describe 
> the case:
> 
>     If the
>     nextnonce field is present the client SHOULD use it when 
> constructing
>     the Authorization header for its next request. Failure of 
> the client
>     to do so may result in a request to re-authenticate from 
> the server
>     with the "stale=TRUE".
> 
> Does anyone have any comment? Can anyone confirm that the 
> operation in 
> Digest is as we indicate? We will add some text indicating the 
> limitations of Scenario 1.
> 
> 9- The Radius draft, in section 2.15, indicates:
> 
>           RADIUS
>           servers that do not implement a parameter contained in a
>           Digest-Auth-Param attribute MUST respond with an 
> Access-Reject
>           message.  RADIUS clients that do not implement a parameter
>           contained in a Digest-Auth-Param attribute MUST reject the
>           original HTTP-style request.
> 
> The problem is that the text seems to go against RFC 2617 that says:
> 
>     auth-param
>       This directive allows for future extensions. Any unrecognized
>       directive MUST be ignored.
> 
> The proposal is to remove the above text from the RADIUS draft.
> 
> 
> 10- Similar contradictory text was found in Section 2.16 of 
> the RADIUS 
> draft, that says:
> 
>    RADIUS servers that do
>    not implement AKA Digest MUST response with an Access Reject
>    message.
> 
> We propose to remove the above text. The motivation is that the 
> algorithm already conveys the AKA (AKA extends the algorithm to be 
> AKAv1-MD5 and AKAv1-MD5-sess). The server chooses the 
> algorithm, so the 
> situation currently described, where the client may include an auts 
> attribute, is just an error case, where the client made a mistake and 
> included AUTS when not doing AKA. In case the Radius server does not 
> implement AKA authentication, it will safely ignore this AVP.
> 
> 11- We noticed that most of the HTTP Digest directives contain just a 
> single token. However, the "qop" directive may contain a 
> comma-separated 
> collection of tokens. For instance, qop="auth,auth-int". The 
> question is 
> how do encode these tokens in the Digest-Qop attribute. The 
> options are:
> 
> a) Treat the whole thing as one token and put it into the 
> attribute value.
> b) Each token is an attribute, thus, there might be multiple 
> Digest-Qop 
> attributes in a particular Radius/Diameter message.
> 
> We think that option b) is cleaner. Particularly it will be 
> easier for 
> the Diameter/Radius client to encode different values in different 
> attributes.
> 
> Any comments to any of the above?
> 
> Regards,
> 
>            Miguel
> 
> 
> 
> 
> -- 
> Miguel A. Garcia           tel:+358-50-4804586
> Nokia Research Center      Helsinki, Finland
>