Re: Fwd: hdsl2ShdslMIB: SpanConfNumRepeaters & StatusNumAvailRepeaters question

Thank you very much, Scott. It is clear for me now.

2009/10/20 Scott Baillie <[email protected]>

> Hi Artem,
>
> According to the previously mentioned paragraph,
> you have to discard the rows associated with
> unavailable units. The following sentence is relevant :
>
> For those conditions
> where the number of provisioned repeaters is greater than those
> encountered during span discovery, all table entries associated with
> the nonexistent repeaters are to be discarded.
>
> So you must discard the rows associated with the
> unavailable units hence you must discard the statistics
> otherwise you will not be compliant with RFC4319.
>
> Regards,
>
> Scott.
>
> On Tue, 2009-10-20 at 15:59 +0700, Artem Polyakov wrote:
> > Forgot to change e-mail again. Sorry
> >
> > ---------- Пересланное сообщение ----------
> > От: Artem Polyakov <[email protected]>
> > Дата: 20 октября 2009 г. 15:58
> > Тема: Re: [Adslmib] hdsl2ShdslMIB: SpanConfNumRepeaters &
> > StatusNumAvailRepeaters question
> > Кому: [email protected]
> >
> >
> > Thank you very much, Scott
> >
> > And what about second question:
> >
> >         > And there is another related question:
> >         > Let's suppose that channel was working with 6 repeaters.
> >         Statistics
> >         > was accumulated. Then link got down, discovery process
> >         started again.
> >         > The reason of link down is a damage of segment between SRU3
> >         & SRU4. So
> >         > now we have a span with only 3 discovered repeaters (I use
> >         STU-C
> >         > polling only). So if the answer for the first question is
> >         "yes, you
> >         > need to represent only discovered units", I have to show
> >         only
> >         > following units: STU-C, SRU1,SRU2,SRU3. But maybe it is
> >         interesting to
> >         > have access to saved statistics from unavailable units? Does
> >         it
> >         > consider in MIB or it is not important?
> >
> >
> > Should I show saved information about currently unavailable units. It
> > can be useful.
> >
> >
> >
> > --
> > С Уважением, Поляков Артем
> > Best regards, Artem Polyakov
> >
> >
> >
> >
> > --
> > С Уважением, Поляков Артем
> > Best regards, Artem Polyakov
> > _______________________________________________
> > Adslmib mailing list
> > [email protected]
> > https://www.ietf.org/mailman/listinfo/adslmib
>
>


-- 
С Уважением, Поляков Артем
Best regards, Artem Polyakov

_______________________________________________
Adslmib mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/adslmib