Re: draft-ietf-adslmib-gshdslbis-01.txt

Hi Matt,

Thanks for the head-up on this. Those two objects should be INTEGER to 
be correct. I'll put out a -02 version of the draft with the correction.

I'm now curious as to how this got past my compiler. This will be 
interesting to look into. I'll check out my process before I put out a 
-02 version.

Have a great day!

- Clay

Matt Beanland wrote:

> Hi Clay,
>
> Good work with the draft-ietf-adslmib-gshdslbis-01.txt
>
> My MIB compiler (MG-SOFT) had a problem with the case of Integer for 
> the hdsl2ShdslEndpointCurrTipRingReversal and 
> hdsl2ShdslEndpointCurrActivationState objects in the 
> Hdsl2ShdslEndpointCurrEntry below. It insisted that I needed to make 
> them INTEGER.
>
>    Hdsl2ShdslEndpointCurrEntry ::=
>       SEQUENCE
>       {
>       hdsl2ShdslEndpointCurrAtn                Integer32,
>       hdsl2ShdslEndpointCurrSnrMgn             Integer32,
>       hdsl2ShdslEndpointCurrStatus             BITS,
>       hdsl2ShdslEndpointES                     Counter32,
>       hdsl2ShdslEndpointSES                    Counter32,
>       hdsl2ShdslEndpointCRCanomalies           Counter32,
>       hdsl2ShdslEndpointLOSWS                  Counter32,
>       hdsl2ShdslEndpointUAS                    Counter32,
>       hdsl2ShdslEndpointCurr15MinTimeElapsed
>                                Hdsl2ShdslPerfTimeElapsed,
>       hdsl2ShdslEndpointCurr15MinES            PerfCurrentCount,
>       hdsl2ShdslEndpointCurr15MinSES           PerfCurrentCount,
>       hdsl2ShdslEndpointCurr15MinCRCanomalies  PerfCurrentCount,
>       hdsl2ShdslEndpointCurr15MinLOSWS         PerfCurrentCount,
>       hdsl2ShdslEndpointCurr15MinUAS           PerfCurrentCount,
>       hdsl2ShdslEndpointCurr1DayTimeElapsed
>                                       Hdsl2ShdslPerfTimeElapsed,
>       hdsl2ShdslEndpointCurr1DayES
>                                      Hdsl2ShdslPerfCurrDayCount,
>       hdsl2ShdslEndpointCurr1DaySES
>                                      Hdsl2ShdslPerfCurrDayCount,
>       hdsl2ShdslEndpointCurr1DayCRCanomalies
>                                      Hdsl2ShdslPerfCurrDayCount,
>       hdsl2ShdslEndpointCurr1DayLOSWS
>                                      Hdsl2ShdslPerfCurrDayCount,
>       hdsl2ShdslEndpointCurr1DayUAS
>                                      Hdsl2ShdslPerfCurrDayCount,
>       hdsl2ShdslEndpointCurrTipRingReversal    Integer,
>       hdsl2ShdslEndpointCurrActivationState    Integer
>       }
>
> I'm not sure if this is a language issue or a tool issue, but I 
> thought I'd best let you know.
>
> Best Regards,
>
> Matt Beanland
>
> Extel Communications
> 399 Ferntree Gully Road
> Mt Waverley 3149
> Australia
> Ph: +613 8542 9259 Fax: +613 8542 9299
>
>
>
> ---------------------------------------------------------------------------------------------------- 
>
> The information contained in this message and any attachments is
> confidential and intended for the named recipient(s). If you have 
> received
> this message in error, please contact sender by return e-mail and
> destroy the message and any attachments.
> Any opinions or undertakings expressed in this message are those of the
> individual sender except where the sender expressly and with authority
> states them to be the opinions of Extel.
> ---------------------------------------------------------------------------------------------------- 
>
>

-- Paradyne Mail --