Re: I-D ACTION:draft-ietf-adslmib-gshdslbis-08.txt

Hi Randy,

It looks like there are two issues:

   1. The "=" got removed in all the SEQUENCE definitions in the -08
      version.
      This sure sounds like what you point to in RFC 2045.  However, I'm
      not sure what I did to cause it.  I copied myself on the
      submission and the "::=" was intact.
   2. There was a 3/15 announcement of the availability of the -08
      version which had been available for some time.
      I just wanted everyone to know that I submitted a -09 version
      which should become available soon.

I copied myself on the -09 version submission along with some others.  
Mike Heard let me know that his copy had the "::=" intact.  Hopefully 
when it gets posted, it will be ok.  One lesson I learned is to check 
what gets posted and make sure it's what is expected.

Regards,
Clay


Randy Presuhn wrote:

>Hi -
>
>Might (3) on pages 19-20 of RFC 2045 be part of this problem?
>
>Randy
>
>  
>
>>From: "Clay Sikes" <[email protected]>
>>To: <[email protected]>
>>Cc: <[email protected]>; <[email protected]>
>>Sent: Tuesday, March 15, 2005 7:20 AM
>>Subject: Re: [Adslmib] I-D ACTION:draft-ietf-adslmib-gshdslbis-08.txt
>>
>>    
>>
>
>  
>
>>Hi,
>>
>>There seems to be something strange happening.  On 2/21/2005, I
>>submitted version -08, but was told to resubmit on or after 3/7/2005.
>>On 3/7/2005, I resubmitted version -08.  One of these version -08
>>submission got posted.  However, the file posted has an issue where some
>>lines ending with a "=" got the "=" chopped off.  Last night, 3/14/2005,
>>I submitted -09 which just has the version and dates updated.  Please be
>>looking for version -09.  That will be the version we will move forward
>>on if it doesn't have the same issue where content got dropped.
>>
>>Regards,
>>Clay Sikes
>>
>>
>>On Mon, 15 March 2005, Clay Sikes wrote:
>>
>>    
>>
>>>Hi,
>>>
>>>Please find an Internet-Draft attached for submission.
>>>
>>>Title: Definitions of Managed Objects for G.shdsl.bis Lines
>>>I-D Tag: draft-ietf-adslmib-gshdslbis-09.txt
>>>Author(s): C. Sikes, B. Ray, and R. Abbi
>>>
>>>Thanks,
>>>Clay Sikes
>>>      
>>>
>>
>>[email protected] wrote:
>>
>>    
>>
>>>A New Internet-Draft is available from the on-line Internet-Drafts directories.
>>>This draft is a work item of the ADSL MIB Working Group of the IETF.
>>>
>>>Title : Definitions of Managed Objects for G.shdsl.bis Lines
>>>Author(s) : C. Sikes, et al.
>>>Filename : draft-ietf-adslmib-gshdslbis-08.txt
>>>Pages : 0
>>>Date : 2005-3-8
>>>
>>>This document defines a Management Information Base (MIB) module for
>>>  use with network management protocols in the Internet community.  In
>>>  particular, it describes objects used for managing High Bit-Rate
>>>  Digital Subscriber Line (DSL) - 2nd generation (HDSL2) and
>>>  Single-Pair High-Speed Digital Subscriber Line (SHDSL) interfaces.
>>>  This document introduces extensions to several objects and textual
>>>  conventions defined in HDSL2-SHDSL-Line MIB (RFC 3276).  This
>>>  document obsoletes RFC 3276.
>>>
>>>A URL for this Internet-Draft is:
>>>http://www.ietf.org/internet-drafts/draft-ietf-adslmib-gshdslbis-08.txt
>>>
>>>To remove yourself from the I-D Announcement list, send a message to
>>>[email protected] with the word unsubscribe in the body of the message.
>>>You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
>>>to change your subscription settings.
>>>
>>>
>>>Internet-Drafts are also available by anonymous FTP. Login with the username
>>>"anonymous" and a password of your e-mail address. After logging in,
>>>type "cd internet-drafts" and then
>>>"get draft-ietf-adslmib-gshdslbis-08.txt".
>>>
>>>A list of Internet-Drafts directories can be found in
>>>http://www.ietf.org/shadow.html
>>>or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
>>>
>>>
>>>Internet-Drafts can also be obtained by e-mail.
>>>
>>>Send a message to:
>>>[email protected].
>>>In the body type:
>>>"FILE /internet-drafts/draft-ietf-adslmib-gshdslbis-08.txt".
>>>
>>>NOTE: The mail server at ietf.org can return the document in
>>>MIME-encoded form by using the "mpack" utility.  To use this
>>>feature, insert the command "ENCODING mime" before the "FILE"
>>>command.  To decode the response(s), you will need "munpack" or
>>>a MIME-compliant mail reader.  Different MIME-compliant mail readers
>>>exhibit different behavior, especially when dealing with
>>>"multipart" MIME messages (i.e. documents which have been split
>>>up into multiple messages), so check your local documentation on
>>>how to manipulate these messages.
>>>
>>>
>>>Below is the data which will enable a MIME compliant mail reader
>>>implementation to automatically retrieve the ASCII version of the
>>>Internet-Draft.
>>>
>>>
>>>------------------------------------------------------------------------
>>>
>>>_______________________________________________
>>>Adslmib mailing list
>>>[email protected]
>>>https://www1.ietf.org/mailman/listinfo/adslmib
>>>
>>>
>>>      
>>>
>>-- Paradyne Mail --
>>
>>
>>_______________________________________________
>>Adslmib mailing list
>>[email protected]
>>https://www1.ietf.org/mailman/listinfo/adslmib
>>    
>>
>
>
>
>_______________________________________________
>Adslmib mailing list
>[email protected]
>https://www1.ietf.org/mailman/listinfo/adslmib
>  
>

-- Paradyne Mail --