RE: Connectivity Fault Management MIB

Please provide clarifications for the IEEE8021-CFM-MIB in .1ag:

1. If dot1agCfmStackMepId=3D=3D0 (a MEP is not configured on an =
interface),  what
value does index dot1agCfmMdIndex have in dot1agCfmStackTable?

2. Why the index, for example, in dot1agCfmMdTable is an single integer
one (dot1agCfmMdIndex) and not a pair {dot1agCfmMdFormat, =
dot1agCfmMdName}?
In this case we will not need the object dot1agCfmMdTableNextIndex, etc.

3. The same concerns dot1agCfmMaIndex vs. {dot1agCfmMaFormat, =
dot1agCfmMaName}. In another words, why cannot we index=20
dot1agCfmMaTable by index {dot1agCfmMdFormat, dot1agCfmMdName, =
dot1agCfmMaFormat, dot1agCfmMaName}?

4. Why do we have both the field dot1agCfmMaMoreThanOneVid and a special =
interval for dot1agCfmMaIndex to reflect a association with VLAN? IMHO =
simpler method is to have in this table number of VLANs, that may be 0.

5. In the Table 17-1 object dot1agCfmMdIndex is referred to =
12.14.2.1.2:b, but 12.14.2.1.2:b describes "An MD Level". Could you use =
integer index dot1agCfmStackLevel instead?=20

Thanks, Alex

-----Original Message-----
From: Romascanu, Dan (Dan) [mailto:[email protected]]
Sent: Wednesday, November 15, 2006 12:10 AM
To: MIB Doctors; Bridge-Mib (E-mail)
Subject: [Bridge-mib] Connectivity Fault Management MIB=20


The IEEE 802.1 P802.1ag/D7.1 - Connectivity Fault Management is running
a recirculation ballot.=20

The full standard draft is available at:=20

http://www.ieee802.org/1/files/private/ag-drafts/d7/802-1ag-d7-1.pdf

The MIB module in txt format is available at:=20

http://www.ieee802.org/1/files/private/ag-drafts/d7/8021ag71.mib

Please review and provide comments until 11/23 to me, Bert, or the IEEE
802.1 WG e-mail list.=20

Folks who need the IEEE Web site username and password for the purpose
of reviewing these documents are invited to approach me or Bert.=20

Dan


=20


_______________________________________________
Bridge-mib mailing list
[email protected]
https://www1.ietf.org/mailman/listinfo/bridge-mib



*************************************************************************=
*********************************************


The information contained in this e-mail message and its attachments is =
privileged and confidential, and is protected from unauthorized use or =
dissemination or by intellectual property rights. The information is =
intended only for the use of the individual or entity named above. If =
the reader of this message is not the intended recipient, you are hereby =
notified that any dissemination, distribution or copying of this =
communication is strictly prohibited. If you have received this =
communication in error, please notify MRV immediately by telephone, or =
by e-mail and delete the message from your computer.



Thank you!



*************************************************************************=
***********************************

=20
*************************************************************************=
***********
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & =
computer viruses.
*************************************************************************=
***********