Re: [Diffserv] parameters section missing from the Diffserv PIB

please see bellow

"Wijnen, Bert (Bert)" a =E9crit :
>=20
> > Kwok Ho Chan wrote:
> >
> > > Yacine, Jussi:
> > > The Diffserv PIB already IMPORT Dscp and IfDirection from different
> > > modules of
> > > the Diffserv MIB.  So I did not think there is any issue to
> > > also reused the definitions
> >
> >
> >
> > ok for reuse but here we're talking about OIDs...
> > my question is: what is the signification of MIB-specific
> > OIDs within a PIB ?
> >
> I suspect that you have NOT yet gone to the diffserv MIB to take
> a look as to what those OIDs are representing. Once you do that,
> I think it should be pretty clear.
>=20

I suspect that you suspect easily... let me know if I cant ask questions
about things I dont understand (be sure I looked for answers before
asking on the list).

** example:
diffServTBParamSimpleTokenBucket OID =3D mib-2.97.3.1
this OID has a meaning in the MIB tree, but it has not in the PIB tree.=20
it seems that it's just a pointer towards the MIB and I was wondering
about the conssistency with the PIB namespace.

thank you Kwok for your explanations
yacine


> Bert
> > In the previous versions of the PIB draft, these were identified by
> > PRIDS, they pointed towards a PRC within the same PIB... how does it
> > work now ?
> >
> No, this is incorrect. In earlier versions, they were OBJECT IDENTIFIERS
> which basically DUPLICATED what was already in the MIB. And because of
> that duplication I (in my role of PIB/MIB reviewer) recommended that the
> OIDs from the MIB should be re-used.
>=20
> Bert
> > thanks,
> > yacine
> >
> >
> > > for dsTBParamType and dsIfSchedulerCapsServiceDisc from the
> > Diffserv MIB as
> > > advised during IESG review.
> > >
> > > The Diffserv PIB's references to the Diffserv MIB are
> > clearly specified as:
> > >
> > >    dsIfSchedulerCapsServiceDisc OBJECT-TYPE
> > >        SYNTAX      AutonomousType
> > >        STATUS      current
> > >        DESCRIPTION
> > >          "The scheduling discipline for which the set of
> > capabilities
> > >          specified in this object apply. Object identifiers
> > for several
> > >          general purpose and well-known scheduling disciplines are
> > >          shared with and defined in the Diffserv MIB.
> > >
> > >          These include diffServSchedulerPriority,
> > >          diffServSchedulerWRR, diffServSchedulerWFQ."
> > >
> > > and
> > >
> > >    dsTBParamType OBJECT-TYPE
> > >        SYNTAX       AutonomousType
> > >        STATUS       current
> > >        DESCRIPTION
> > >          "The Metering algorithm associated with the
> > >          Token-Bucket parameters.  zeroDotZero indicates this
> > >          is unknown.
> > >          Standard values for generic algorithms are as follows:
> > >          diffServTBParamSimpleTokenBucket, diffServTBParamAvgRate,
> > >          diffServTBParamSrTCMBlind, diffServTBParamSrTCMAware,
> > >          diffServTBParamTrTCMBlind, diffServTBParamTrTCMAware,
> > >          diffServTBParamTswTCM
> > >
> > >          These are specified in the Diffserv MIB."
> > >
> > > respectively.
> > >
> > > I believe the above text is clear.
> > > Please advise if improvement can be made.
> > > Thanks!
> > > -- Kwok --
> > >
> > >
> > > At 09:31 AM 9/12/02 +0200, Yacine El Mghazli wrote:
> > >
> > >> I was wondering about this point:
> > >>
> > >> how are the OIDs identified in the MIB senseful within the PIB ?
> > >>
> > >> my understanding is that the PIB is an AUTONOMOUS named data
> > >> structure... in this context, what is the meaning of an OID
> > >> referencing nothing in the PIB itself ?
> > >>
> > >> thank you for your explanations,
> > >> yacine
> > >>
> > >>
> > >>
> > >> Wijnen, Bert (Bert) wrote:
> > >>
> > >>> I think they are the parameters that have been sepcified and
> > >>> identified in the diffserv MIB (RFC3289)
> > >>> Thanks,
> > >>> Bert
> > >>>
> > >>>> -----Original Message-----
> > >>>> From: Lemponen Jussi [mailto:[email protected]]
> > >>>> Sent: woensdag 11 september 2002 23:02
> > >>>> To: [email protected]
> > >>>> Subject: [Diffserv] parameters section missing from the
> > Diffserv PIB
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>> Reading through draft-ietf-diffserv-pib-09.txt, I noticed that
> > >>>> the parameters section in the PIB itself is missing. The
> > descriptions
> > >>>> for attributes dsTBParamType and
> > dsIfSchedulerCapsServiceDisc do still
> > >>>> imply that some parameter definitions should be there.
> > >>>>
> > >>>>
> > >>>> Jussi Lemponen
> > >>>> Tampere University of Technology
> > >>>> Institute of Communications Engineering
> > >>>> =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F
> > >>>> diffserv mailing list
> > >>>> [email protected]
> > >>>> https://www1.ietf.org/mailman/listinfo/diffserv
> > >>>> Archive:
> http://www.ietf.org/mail-archive/working-groups/diffserv/curre
> >>>
> >>> nt/maillist.html
> >>> =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F
> >>> diffserv mailing list
> >>> [email protected]
> >>> https://www1.ietf.org/mailman/listinfo/diffserv
> >>> Archive:
> >>> http://www.ietf.org/mail-archive/working-groups/diffserv/current/mail=
list.html
> >>>
> >>>
> >>
> >>
> >
> >