Ftp-WG: Re: MLST draft - NUL CR LF again

----- Original Message -----
From: "Alun Jones" <[email protected]>
To: "FTPEXT Working Group" <[email protected]>
Sent: Thursday, April 25, 2002 9:06 AM
Subject: Ftp-WG: Re: MLST draft - NUL CR LF again


> At 07:10 AM 4/25/2002, Gregory A Lundberg wrote:
> >OK.  Obviously we're reading different versions of RFC 1123.
> >I got mine from rfc-editor.org and here's what is says on page 21:
> ...
> >       The Telnet end-of-line sequence CR LF MUST be used to send
> >       Telnet data that is not terminal-to-computer (e.g., for Server
> >       Telnet sending output, or the Telnet protocol incorporated
> >       another application protocol).
> >
> >Nowhere in there does it make ANY requirement that end-of-line may
> >only be represented by CR LF.
> ...
> >The fourth tells us that when sent over a Telnet connection from a
> >server-FTP, only CR LF may be sent.
> ...
> >   The server-FTP MUST transmit the sequence CR LF to mark the end-
> >    of-line.  [Fourth paragraph, explicitly.]
>
> That's not how I read the fourth paragraph of RFC 1123, section 3.3.1.  I
> read it as saying that when "the Telnet protocol is incorporated in
another
> protocol", as we have here, "the Telnet end-of-line sequence CR LF MUST be
> used".
>
> Alun.
> ~~~~
>
> --
> Texas Imperial Software   | Try WFTPD, the Windows FTP Server. Find us at
> 1602 Harvest Moon Place   | http://www.wftpd.com or email [email protected]
> Cedar Park TX 78613-1419  | VISA/MC accepted.  NT-based sites, be sure to
> Fax/Voice +1(512)258-9858 | read details of WFTPD Pro for NT.
>
>
>