AW: [Geopriv] Explicit Indication of Location Object Consumer

"Tschofenig, Hannes" <[email protected]>
Newsgroups gmane.ietf.sip,gmane.ietf.geopriv
Message-ID <A5D2BD54850CCA4AA3B93227205D8A30696A68@MCHP7IEA.ww002.siemens.net>
Hi Brian, 

> I would say no.  If the location is not needed by proxies, 
> then I would say
> you MUST protect it (S/MIME), or it will not be private.
I am less concerned about the security aspects here and more focused the
protocol operation first. 
Typically, it is good to know for a device whether it has to process the
content of the message or not.  

If you want to prevent intermediaries to inspect your location object
then S/MIME might be a choice (at least on paper). 

> 
> If you have to route on it (emergency or otherwise), then you 
> have to send
> it with TLS, and the proxies can see it. 
> 
> Brian

Ciao
Hannes

> 
> -----Original Message-----
> From: Hannes Tschofenig [mailto:[email protected]] 
> Sent: Sunday, May 21, 2006 7:40 AM
> To: [email protected]; [email protected]
> Subject: [Geopriv] Explicit Indication of Location Object Consumer
> 
> Hi James
> Hi Brian,
> 
> do you plan to put additional info into the SIP message to 
> indicate who 
> should consume the Location Object (explicity rather than 
> implicit info)?
> 
> Here is an example: Assume that SIP UA Alice wants to give 
> Bob location 
> information (via reference). Now, Alice could easily indicate that it 
> wants Bob to resolve the reference and to process the 
> location object. 
> Stating this explicitly would prevent proxies to resolve it and to 
> process the location object.
> 
> Ciao
> Hannes
> 
> 
> _______________________________________________
> Geopriv mailing list
> [email protected]
> https://www1.ietf.org/mailman/listinfo/geopriv
> 
> 
> _______________________________________________
> Geopriv mailing list
> [email protected]
> https://www1.ietf.org/mailman/listinfo/geopriv
> 

_______________________________________________
Sip mailing list  https://www1.ietf.org/mailman/listinfo/sip
This list is for NEW development of the core SIP Protocol
Use [email protected] for questions on current sip
Use [email protected] for new developments on the application of sip
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.