FW: [EFM] IEEE 802.3ah MIB?

Hi, we are interested in implementing a future standard EFM MIB, and are
interested in reviewing drafts but not in editing.
Best regards,
	-- John
--
John Messenger ([email protected])
R&D Software Manager, ADVA Optical Networking Ltd.
Tel: +44-1904 699309   Fax: +44-1904 699378
www.advaoptical.com
"Mind like parachute - only work when open" (Charlie Chan) 

-----Original Message-----
From: Romascanu, Dan (Dan) [mailto:[email protected]]
Sent: 30 June 2003 15:40
To: Bemmel, Vincent; [email protected]
Cc: [email protected]
Subject: RE: [EFM] IEEE 802.3ah MIB?



Up to this point we have two volunteers for participating in a possible
802.3ah MIB work - one for copper, and one for EPON. We have also noted the
interest expressed by the Chair of the IEEE 802.3ah - Howard Frazier. This
is promising, but still, IMO,  under the threshold of interest required for
starting new work in the IETF Ethernet Interfaces and Hub MIB WG.

If you and/or your sponsoring company are interested in participating in
this work and/or implementing a future standard EFM MIB (whatever flavor of
EFM) in your products - please send an e-mail to [email protected]. 

Thanks,

Dan

Dan Romascanu,
Chair, IETF Ethernet Interfaces and Hub MIB WG



> -----Original Message-----
> From: Bemmel, Vincent [mailto:[email protected]]
> Sent: 30 June, 2003 5:39 AM
> To: Romascanu, Dan (Dan); '[email protected]'
> Subject: RE: [EFM] IEEE 802.3ah MIB?
> 
> 
> Dan,
> 
> I would like to co-edit the EPON MIB. This will include 
> seperate MIBs for
> the OLT and the ONU with associated services.
> 
> I hope we can show enough interest to get this work started asap.
> 
> Regards,
> 
> Vincent Bemmel
> Alloptic
> http://www.alloptic.com
> 
> > Dan,
> >
> >I'm interested to become a co-editor of the 802.3ah MIB.
> >My company specializes in Aggregated Copper EFM systems
> >(currently long reach - 2BaseTL).
> >
> >Regards,
> >-Edward Beili
> > Senior System Engineer
> > Actelis Networks
> >
...