RE: 802.3ae (10 Gb/s Ethernet) approved by IEEE standards board
"Romascanu, Dan (Dan)" <[email protected]>
| Newsgroups | gmane.ietf.hubmib |
|---|---|
| Message-ID | <AAB4B3D3CF0F454F98272CBE187FDE2F0199A476@IS0004AVEXU1.global.avaya.com> |
> -----Original Message----- > From: C. M. Heard [mailto:[email protected]] > Sent: Friday, June 14, 2002 4:36 AM > To: [email protected] > Cc: [email protected] > Subject: [Hubmib] 802.3ae (10 Gb/s Ethernet) approved by IEEE > standards board > > > The details can be found here: > > http://grouper.ieee.org/groups/802/3/10G_study/email/msg05633.html > > This clears the way for the hubmib drafts submitted to the IESG in > May to move forward As the IEEE standards will be published, the references need to be updated. I trust that the editors will do this in the next spin, after the IESG review. >(except for the WIS MIB, which also needs for > the SONET-MIB update to pass WG and IESG approval). It would be useful if you can provide to the hubmib folks who are not on atommib a short report on status and plans wrt. the SONET MIB. > > Regards, > > Mike > > > > _______________________________________________ > Hubmib mailing list > [email protected] > https://www1.ietf.org/mailman/listinfo/hubmib >