RE: Cadence description text

"David De Reu" <[email protected]>
Newsgroups gmane.ietf.ipcdn
Message-ID <[email protected]>
MessageDear all,

I agree as well.

Regards,

David


  -----Original Message-----
  From: [email protected] [mailto:[email protected]]On Behalf Of
Beacham Gordon-CGB005
  Sent: dinsdag 19 oktober 2004 17:48
  To: 'Kumar, Satish'; [email protected]; '[email protected]'
  Subject: [ipcdn] RE: Cadence description text


  Satish,

  I agree with your comment to remove the text.

  Gordon
    -----Original Message-----
    From: Kumar, Satish [mailto:[email protected]]
    Sent: Thursday, October 07, 2004 5:31 PM
    To: Beacham Gordon-CGB005; [email protected]
    Subject: Cadence description text


    Hi,
     The pktcRingCadence description has below text.

     PktcRingCadence   ::= TEXTUAL-CONVENTION
           STATUS        current
           DESCRIPTION
               "
                 This object represents a ring cadence and repeatable
                 Characteristics in a bit string format. The first two
                 octets of the bit string represent the length in bits of
                 the duration of the cadence (i.e., the number of bits that
                 follow the third octet). The third octet is used to
                 represent repeatable characteristics. 00000000 means
                 repeatable, and 10000000 means non repeatable. Each bit
                 after the third octet represents 50 ms and 1 represents
                 ring and 0 represents silent. The first bit of the fourth
                 octet is the first bit of the ring cadence. All bits are
                 counted in network order such that the octet with only the
                 first bit set will look like 10000000 bit sequence. A
                 total of 264 bits can be set to represent 13200 ms of
                 total cadence cycle. There will be at most 3 on/off
                 transitions per cadence period."
           SYNTAX  OCTET STRING (SIZE(4..36))

    The text in red color above in description has no relevance to cadence
type description. This is very confusing, and may lead to think that all
cadences are not supposed to have more than 3 transition periods. I am
proposing to remove this text.

    Comments please

    Thanks,
    Satish Kumar,
    Texaas Instruments

_______________________________________________
IPCDN mailing list
[email protected]
https://www1.ietf.org/mailman/listinfo/ipcdn
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.