RE: Recharter IPoRPR WG
[email protected] Mon, 14 Mar 2005 14:16:02 +0100
| Newsgroups | gmane.ietf.iporpr |
|---|---|
| Message-ID | <[email protected]> |
Glenn,
I think that the group should also cover the mapping of MPLS over RPR.
Moreover, regarding ITU SG15 relationships, I think we need to include also
Q.11/15 and Q.12/15 in addition to Q.9/15 because all of these three questions
are currently considering RPR.
Below you can find a proposed revised version of the "Description of Working
Group".
Best regards, Italo
Description of Working Group:
Resilient Packet Rings (RPR), developed within the IEEE 802.17 RPR WG, provides
substantial enhancements in both efficiency and flexibility over current
bi-directional ring topologies. Benefits of resilient packet rings include
spatial re-use (full utilization of both counter-rotating rings) while
maintaining protection switching during media faults, as well as defined
mechanisms for topology discovery, congestion control, and protection switching.
Reference the IEEE 802.17 RPR WG at http://www.ieee802.org/17/ for further
information. IEEE 802.17-2004 is currently published and work is in progress on
bridging enhancements.
The IPORPR Working Group will produce two documents:
1) An IPORPR Framework that describes some of the features and
characteristics of 802.17 RPR, and how they might be exploited
by, e.g., IP or MPLS. For example, an RPR ring can be accessed
in a number of ways: it can be viewed as a "dumb" LAN supporting
traditional broadcast a la Ethernet (called "basic mode"), or its
advanced features could be exploited.
2) An IPORPR definition of how to transport IP and MPLS over 802.17 RPR in
"basic mode". This document will cover encapsulation formats
(e.g., IPv4/IPv6, MPLS), how to perform address resolution (e.g., ARP/ND),
IP
multicast transmission, priority mapping to the RPR
"serviceClass", etc.
There are no formal liaisons between the IPORPR working group and
other standards bodies. However, cross participation is encouraged in the key
RPR activities in these standards bodies:
- IEEE 802.17 (http://www.ieee802.org/17/)
- ITU-T SG15 Q9 (http://www.itu.int/ITU-T/studygroups/com15/sg15-q9.html)
- ITU-T SG15 Q11 (http://www.itu.int/ITU-T/studygroups/com15/sg15-q11.html)
- ITU-T SG15 Q12 (http://www.itu.int/ITU-T/studygroups/com15/sg15-q12.html)
-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Glenn
Parsons
Sent: Tuesday, March 01, 2005 00:29
To: [email protected]
Subject: [IPORPR] Recharter IPoRPR WG
Folks,
The IPoRPR WG has been in hibernation for quite some time. Given the
publication of IEEE 802.17 last year, it is time to shut down this WG... or
recharter and do something.
Assuming there is some interest in the latter, I have attached a revised charter
proposal that our AD will be reviewing with the IESG shortly.
Let us know if you have any comments.
Cheers,
Glenn Parsons
[email protected]