Re: IPP WG Last Call: IPP Everywhere Printer Self-Certification Tools v1.1 Update 4

ISTO-PWG Internet Printing Protocol workgroup discussion forum via ipp <[email protected]> Mon, 28 Feb 2022 23:49:52 +0000
Newsgroups	gmane.ietf.ipp
Message-ID	<[email protected]>
Hi Steven,

I'll look into that in a few minutes. Sorry for the delay.

Smith

/**
    Smith Kennedy
    HP Inc.
*/

> On Feb 25, 2022, at 7:21 PM, Steven Young <[email protected]> wrote:
> 
> Michael and Smith,
> 
> I have received a quick response from Canon Inc in testing the newly released IPP Everywhere Self-Cert 1.1 Update 4. They found the fix Smith Kennedy made for request #70 "finishings-col-default is not expected in IPP Everywhere Printer Self-Certification Tools" is not included in this release. Can you please make the change to include the fix in Update 4.
> 
> Regards,
> 
> Steven
> 
> -----Original Message-----
> From: Steven Young
> Sent: Friday, February 25, 2022 4:59 PM
> To: Michael Sweet <[email protected]>; PWG IPP Workgroup <[email protected]>; ISTO-PWG IPP Everywhere Self-Certification discussion forum <[email protected]>
> Subject: RE: IPP WG Last Call: IPP Everywhere Printer Self-Certification Tools v1.1 Update 4
> 
> Michael,
> 
> Thank you very much. I will forward the information to Canon Inc for them to test their SELPHY printer using this new tool.
> 
> Regards,
> 
> Steven
> 
> -----Original Message-----
> From: Michael Sweet <[email protected]>
> Sent: Friday, February 25, 2022 4:53 PM
> To: PWG IPP Workgroup <[email protected]>; ISTO-PWG IPP Everywhere Self-Certification discussion forum <[email protected]>
> Cc: Steven Young <[email protected]>
> Subject: IPP WG Last Call: IPP Everywhere Printer Self-Certification Tools v1.1 Update 4
> 
> All,
> 
> I have posted candidate builds of the IPP Everywhere Printer Self-Certification Tools v1.1 Update 4 to:
> 
> https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-20220225-macos.zip <https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-20220225-macos.zip>
> https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-20220225-rhel.tar.gz <https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-20220225-rhel.tar.gz>
> https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-20220225-ubuntu.tar.gz <https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-20220225-ubuntu.tar.gz>
> https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-20220225-windows.msi <https://ftp.pwg.org/pub/pwg/ipp/wd/sw-ippeveselfcert11-20220225-windows.msi>
> 
> These tools fix all of the known bugs in the self-certification tools and have been tested locally by me on some existing IPP Everywhere printers as well as the ippeveprinter test server. Changes include:
> 
> - Added support for running the self-certification tools non-interactively
> with the "make test" command (Issue #56, Issue #62)
> - The `ippevesubmit` program did not validate the correct number of tests for
> the document results (Issue #71)
> - The DNS-SD TLS key test was incorrectly specified (Issue #72)
> - The `ippevesubmit` program now validates and converts product web page URLs
> (Issue #75)
> - The IPP and document tests now support printers that do not support US letter
> or ISO A4 sizes (Issue #78)
> - The `ipptool` program can now generate PWG Raster documents dynamically for
> printers (Issue #79)
> - The `ippevesubmit` program now uses the modification date of the plist files
> instead of the current date when generating the JSON submission file
> (Issue #81)
> - The `ippfind` program did not correctly escape command-line arguments passed
> during the DNS-SD tests (Issue #83)
> - Fixed the conditional requirements for "printer-supply-xxx" attributes with
> printers that do not have supplies.
> - Fixed some problems with the Windows DNS-SD test script.
> 
> Note: The new tools no longer depend on downloading PWG raster files - they are capable of generating the necessary raster test files on the fly and support all media sizes, most color spaces (all but the Device-N ones), all bit depths, and all duplex modes ("pwg-raster-document-sheet-back" values). Thus, a much wider range of printers should be supported by the tools.
> 
> Please test these tools against your own printers and report on successes as well as any problems you run into, either by replying to this message *or* by using the Github issue tracker at:
> 
> https://github.com/istopwg/ippeveselfcert/issues <https://github.com/istopwg/ippeveselfcert/issues>
> 
> The plan is to release these builds no sooner than March 11th, and only after I have received at least two positive testing results.
> 
> Enjoy!
> 
> ________________________
> Michael Sweet
> 
>

_______________________________________________
ipp mailing list
[email protected]
https://www.pwg.org/mailman/listinfo/ipp
signature.asc (application/pgp-signature, 833 B)